All products
All cables
Analog and digital room thermostats
Automotive cables
Battery cable
Bell and lighting concepts
Blind switch
Cable by the metre
Campervan
Control cables
Data cable
Flexible cables
Flush-mounted radio
HI-FLEX battery cable
House
Installation cable
Light switches & dimmers
Network sockets
Other
Photovoltaics
Power cables
Rubber cable
Sauna
Silicone cables
Single-core wires
Sockets, Switches & Accessories
Solar cable
Special cable
TV SAT Radio Outlet Systems
Underground cable
Wall sockets
Welding cable
Workshop
4mm² Grün/Gelb
EBROM H07V-U single-core wire rigid 4mm² green/yellow
1,31 €
H07V-U rigid installation wire High-quality rigid installation wire, ideal for fixed installation. Technical information Fire class according to EN 13501-6: Eca Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Cl.1 = single-wire Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Cold-resistant according to EN 60811-504+505+506: Yes Single-wire VDE 0281 Usage: for protected installation in equipment as well as in and on luminaires. Approved for installation in conduits on and under plaster, but only for signal systems. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U= 300/500 V, maximum permissible operating voltage, three-phase and AC current Uo/U= 330/550 V, DC current Uo/U = 495/825 V, test AC voltage = 2000 V Installation note: When wiring luminaires where the connection area of the wires is not protected from UV radiation and heat (caused by the illuminants), a protective sleeve must always be pushed over the exposed wires. Otherwise, decomposition of the insulation will occur depending on the duty cycle.
Technical data
Cable type
H07V-U
Cross-section
4mm²
Colour
Green/Yellow
Nominal voltage
300/500V
Standard
VDE 0281
6mm² Schwarz
EBROM H07V-K flexible single-core wire 6mm² black
2,40 €
H07V-K flexible wiring cable High-quality flexible multi-strand wiring cable. Technical information Reaction to fire class according to EN 13501-6: Eca Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Class 5 = fine-stranded Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Fine-stranded VDE 0281 Usage: In dry rooms, in equipment, switchgear and distribution cabinets, in conduits on or under plaster as well as for protected installation in luminaires. Not permitted for: direct installation in plaster! Installation on cable trays, in troughs (except covered plastic troughs) and the like. Approved for the internal wiring of devices for a mains voltage up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U = 450/750 V Maximum permissible operating voltage: Three-phase and AC voltage Uo/U = 495/825 V; DC voltage Uo/U = 743/1238 V; Test AC voltage = 2500 V Installation note: When wiring in luminaires where the connection area of the cores is not protected from UV radiation and heat (generated by the light sources), a protective tube must always be slid over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H07V-K
Cross-section
6mm²
Colour
Black
6mm² Schwarz
EBROM H07V-U single-core wire rigid 6mm² black
1,72 €
H07V-U rigid wiring cable High-quality rigid wiring cable, ideal for fixed installation. Technical information Fire behavior class according to EN 13501-6: Eca Flame-retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Cl.1 = single-wire Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Cold-resistant according to EN 60811-504+505+506: Yes Single-wire VDE 0281 Application: for protected installation in devices as well as in and on luminaires. Approved for installation in conduits on and under plaster, however, only for signal systems. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U= 300/500 V, Maximum permissible operating voltage, three-phase and alternating current Uo/U= 330/550 V, direct current Uo/U = 495/825 V, test alternating voltage = 2000 V Installation instruction: When wiring in luminaires where the connection area of the cores is not protected against UV radiation and heat (caused by the illuminants), a protective sleeve must generally be pushed over the exposed cores. Otherwise, decomposition of the insulation occurs depending on the duty cycle.
Technical data
Cable type
H07V-U
Cross-section
6mm²
Color
Black
Nominal voltage
300/500V
Standard
VDE 0281
6mm² Rot
EBROM H07V-K flexible core wire 6mm² red
2,40 €
Battery cable for many areas of application - 99.9% OFC copper - sold by the meter according to customer requirements - various cross-sections - With a fine-stranded copper wire, the nominal cross-section cannot be reliably determined from the diameter of the wire bundle, not even with a caliper. Please use the cable imprint or the data sheet. The circular area calculation using the circle formula A = π × d² / 4 applies to a solid, circular conductor. The sheath and insulation are not part of the conductor area. We are happy to help if you have any questions regarding identification.
Technical data
Cable type
H07V-K
Cross-section
6mm²
Color
Red
6mm² Blau
EBROM H07V-K flexible wire 6mm² blue
2,40 €
Battery cable core wire BLUE H07V-K 4-6 - 10-16 - 25 – 35 – 50 – 70-95 mm² - Battery cable 99.9% copper - Sold by the meter 4mm² 6mm² 10mm² 16mm² 25mm² 35mm² 50mm² 70mm² - Caravan, truck, boat
Technical data
Cable type
H07V-K
Cross-section
6mm²
Color
Blue
6mm² Braun
EBROM H07V-K flexible single-core wire 6mm² brown
2,40 €
H07V-K flexible wiring cable High-quality flexible stranded wiring cable. Technical information Reaction to fire class according to EN 13501-6: Eca Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Class 5 = fine-stranded Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Fine-stranded VDE 0281 Application: In dry rooms, in equipment, switchgear and distribution systems, in conduits on or under plaster as well as for protected installation in luminaires. Not permitted for: direct installation in plaster! Installation on cable trays, in troughs (except for covered plastic troughs) and the like. For the internal wiring of devices approved for a mains voltage up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U = 450/750 V Maximum permissible operating voltage: Three-phase and AC current Uo/U = 495/825 V; DC current Uo/U = 743/1238 V; Test AC voltage = 2500 V Installation note: For wiring in luminaires where the connection area of the cores is not protected from UV radiation and heat (caused by the light sources), a protective sleeve must always be pushed over the exposed cores. Otherwise, decomposition of the insulation will occur depending on the operating time.
Technical data
Cable type
H07V-K
Cross-section
6mm²
Colour
Brown
6mm² Grau
EBROM H07V-K Flexible Single Core Cable 6mm² Grey
2,40 €
H07V-K flexible wiring cable High-quality flexible multi-stranded wiring cable. Technical information Reaction to fire class according to EN 13501-6: Eca Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Class 5 = fine-stranded Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Fine-stranded VDE 0281 Application: In dry rooms, in equipment, switchgear and distribution boards, in conduits on or under plaster, as well as for protected installation in luminaires. Not permitted for: direct installation in plaster! Installation on trays, in troughs (except for covered plastic troughs) and the like. Approved for internal wiring of equipment for a mains voltage of up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U = 450/750 V Maximum permissible operating voltage: Three-phase and AC current Uo/U = 495/825 V; DC current Uo/U = 743/1238 V; Test AC voltage = 2500 V Installation note: When wiring luminaires where the connection area of the wires is not protected from UV radiation and heat (generated by the lamps), a protective sleeve must always be pushed over the exposed wires. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H07V-K
Cross-section
6mm²
Color
Gray
6mm² Hellblau
EBROM H07V-K flexible single core wire 6mm² light blue
2,40 €
H07V-K flexible wiring cable High-quality flexible multi-strand wiring cable. Technical information Reaction to fire class according to EN 13501-6: Eca Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Class 5 = fine-stranded Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Fine-stranded VDE 0281 Application: In dry rooms, in equipment, switchgear and distribution cabinets, in conduits on or under plaster as well as for protected installation in light fittings. Not permitted for: direct installation in plaster! Installation on cable trays, in troughs (except for covered plastic troughs) and the like. Approved for internal wiring of equipment for a mains voltage up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U = 450/750 V Maximum permissible operating voltage: Three-phase and AC current Uo/U = 495/825 V; DC current Uo/U = 743/1238 V; Test AC voltage = 2500 V Installation note: When wiring in light fittings where the connection area of the wires is not protected from UV radiation and heat (generated by the light source), a protective sleeve must always be pushed over the exposed wires. Otherwise, decomposition of the insulation will occur depending on the operating time.
Technical data
Cable type
H07V-K
Cross-section
6mm²
Color
Light blue
6mm² Hellblau
EBROM H07V-U single-core wire rigid 6mm² light blue
1,72 €
H07V-U rigid installation wire High-quality rigid installation wire, ideal for fixed installation. Technical information Fire reaction class according to EN 13501-6: Eca Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Cl.1 = solid Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Cold-resistant according to EN 60811-504+505+506: Yes Solid VDE 0281 Application: for protected installation in equipment as well as in and on luminaires. Approved for installation in conduits on and under plaster, but only for signaling systems. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U= 300/500 V, maximum permissible operating voltage, three-phase and alternating current Uo/U= 330/550 V, direct current Uo/U = 495/825 V, test alternating voltage = 2000 V Installation note: When wiring luminaires where the connection area of the wires is not protected from UV radiation and heat (caused by the light sources), a protective sleeve must always be pushed over the exposed wires. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H07V-U
Cross-section
6mm²
Color
Light blue
Nominal voltage
300/500V
Standard
VDE 0281
6mm² Dunkelblau
EBROM H07V-K flexible single core wire 6mm² dark blue
2,40 €
H07V-K flexible wiring cable High-quality flexible multi-stranded wiring cable. Technical information Reaction to fire class according to EN 13501-6: Eca Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Class 5 = finely stranded Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Finely stranded VDE 0281 Application: In dry rooms, in equipment, switchgear and distribution systems, in conduits on or under plaster, as well as for protected installation in luminaires. Not permitted for: direct installation in plaster! Installation on cable trays, in troughs (except for covered plastic troughs) and the like. Approved for internal wiring of equipment for a mains voltage up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U = 450/750 V Maximum permissible operating voltage: Three-phase and AC current Uo/U = 495/825 V; DC current Uo/U = 743/1238 V; Test AC voltage = 2500 V Installation note: When wiring in luminaires where the connection area of the cores is not protected from UV radiation and heat (caused by the light sources), a protective sleeve must always be pushed over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H07V-K
Cross-section
6mm²
Color
Dark blue
6mm² Grün/Gelb
EBROM H07V-K Flexible Single Core Wire 6mm² Green/Yellow
2,40 €
H07V-K flexible wiring cable High-quality flexible multi-strand wiring cable. Technical information Fire behavior class according to EN 13501-6: Eca Flame-retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Cl.5 = finely stranded Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Finely stranded VDE 0281 Application: In dry rooms, in equipment, switchgear and distribution systems, in conduits on or under plaster as well as for protected installation in luminaires. Not permitted for: direct installation in plaster! Installation on trays, in conduits (except for covered plastic conduits) and the like. Approved for internal wiring of appliances for a mains voltage up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U = 450/750 V Maximum permissible operating voltage: Three-phase and AC current Uo/U = 495/825 V; DC current Uo/U = 743/1238 V; Test AC voltage = 2500 V Installation note: For wiring in luminaires where the connection area of the wires is not protected against UV radiation and heat (caused by the light sources), a protective sleeve must always be pushed over the exposed wires. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H07V-K
Cross-section
6mm²
Color
Green/Yellow
6mm² Grün/Gelb
EBROM H07V-U rigid core wire 6mm² green/yellow
1,72 €
H07V-U rigid installation wire High-quality rigid installation wire, ideal for fixed installation. Technical information Fire behavior class according to EN 13501-6: Eca Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Cl.1 = single-wire Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Cold-resistant according to EN 60811-504+505+506: Yes Single-wire VDE 0281 Application: for protected installation in equipment as well as in and on luminaires. Approved for installation in conduits on and under plaster, but only for signal systems. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U= 300/500 V, maximum permissible operating voltage, three-phase and AC current Uo/U= 330/550 V, DC current Uo/U = 495/825 V, test AC voltage = 2000 V Installation instruction: When wiring in luminaires where the connection area of the cores is not protected from UV radiation and heat (caused by the illuminants), a protective sleeve must always be pushed over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H07V-U
Cross-section
6mm²
Color
Green/Yellow
Nominal voltage
300/500V
Standard
VDE 0281
10mm² Schwarz
EBROM H07V-K flexible single-core wire 10mm² black
2,94 €
Flexible EBROM battery cable type H07V-K. Easy to process and install due to the flexible properties of the many copper strands. 99.9% OFC full copper, highest quality level. Technical data: Max. operating temperature (fixed installation): -30°C to +80°C. Max. operating temperature (moved): -5°C to +70°C. Please check the temperature of the place of use/area of application before use!! Protected installation is recommended! Keep away from hot components and oils! Article class and specifications: Article class: Core cable. Conductor class: Class 5 = fine-stranded. Core insulation: PVC. Nominal voltage: U0 450 V, U 750 V. Conductor material: Copper, bare, 99.99% OFC. With a fine-stranded copper strand, the nominal cross-section cannot be reliably determined from the diameter of the wire bundle, not even with a caliper gauge. Please use the cable imprint or the data sheet. The circular area calculation using the circle formula A = π × d² / 4 applies to a solid, circular conductor. Sheathing and insulation are not part of the conductor area. We are happy to help with questions regarding classification.
Technical data
Cable type
H07V-K
Cross-section
10mm²
Color
Black
10mm² Rot
EBROM H07V-K flexible single-core wire 10mm² Red
2,94 €
Battery cables for many areas of application - 99.9% OFC copper - sold by the meter according to customer requirements - various cross-sections - For fine-stranded copper wire, the nominal cross-section cannot be reliably determined from the diameter of the wire bundle, not even with a caliper. Use the cable imprint or the data sheet. The circular area calculation using the circle formula A = π × d² / 4 applies to a solid, circular conductor. The sheath and insulation are not part of the conductor area. If you have any questions about classification, we are happy to help.
Technical data
Cable type
H07V-K
Cross-section
10mm²
Color
Red
10mm² Blau
EBROM H07V-K Flexible Single Core Wire 10mm² Blue
2,94 €
Flexible EBROM battery cable of type H07V-K. Easy to process and install due to the flexible properties of the many copper strands. 99.9% OFC full copper, highest quality level. Technical data: Max. operating temperature (fixed installation): -30°C to +80°C. Max. operating temperature (moved): -5°C to +70°C. Please check the temperature of the place of use/area of application before use!! Protected installation is recommended! Keep away from hot components and oils! Article class and specifications: Article class: Core cable. Conductor class: Class 5 = fine-stranded. Core insulation: PVC. Nominal voltage: U0 450 V, U 750 V. Conductor material: Copper, bare, 99.99% OFC. With a fine-stranded copper wire, the nominal cross-section cannot be reliably determined from the diameter of the wire bundle, not even with a caliper. Use the cable imprint or the data sheet. The circular area calculation using the circle formula A = π × d² / 4 applies to a solid, circular conductor. The sheath and insulation are not part of the conductor area. We are happy to help if you have any questions regarding allocation.
Technical data
Cable type
H07V-K
Cross-section
10mm²
Color
Blue
Our Videos
Learn more about our products and find out the most important information about cables
What does EBROM stand for?
Copper or aluminum?
Diameter vs. cross-section
HI-FLEX highly flexible
FLY Automotive Cables
Perfect pressings
Cable lugs DIN comparison
Free standard shipping to Germany from €60
Fast shipping within GermanyIn-house German assembly
Cable assemblies from our own productionSpecialist Consulting
Consultation by phone at +49 8074 9176911