All products
All cables
Analog and digital room thermostats
Automotive cables
Battery cable
Bell and lighting concepts
Blind switch
Cable by the metre
Campervan
Control cables
Data cable
Flexible cables
Flush-mounted radio
HI-FLEX battery cable
House
Installation cable
Light switches & dimmers
Network sockets
Other
Photovoltaics
Power cables
Rubber cable
Sauna
Silicone cables
Single-core wires
Sockets, Switches & Accessories
Solar cable
Special cable
TV SAT Radio Outlet Systems
Underground cable
Wall sockets
Welding cable
Workshop
0.5mm² Schwarz
EBROM H05V-K flexible single-core cable 0.5mm² black
0,34 €
Single-core stranded wire, fine-stranded conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power systems for measuring, control and regulation purposes. Not permitted for direct installation under plaster. For the internal wiring of devices approved for a mains voltage up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; DC current Uo/U = 495/825 V; AC test voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the wires is not protected against UV radiation and heat (caused by the light sources), a protective sleeve must always be pushed over the exposed wires. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
0.5mm²
Colour
Black
Nominal voltage
300/500V
Standard
VDE 0281
0.5mm² Rot
EBROM H05V-K flexible single-core wire 0.5mm² red
0,34 €
Single-core stranded wire, fine-stranded conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power systems for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. Approved for internal wiring of equipment for mains voltages up to 1000 V AC and 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and alternating current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; test AC voltage = 2000 V - Installation note: When wiring luminaires where the connection area of the cores is not protected from UV radiation and heat (generated by the lamps), a protective sleeve must always be pushed over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
0.5mm²
Color
Red
Nominal voltage
300/500V
Standard
VDE 0281
0.5mm² Braun
EBROM H05V-K flexible single-core wire 0.5mm² brown
0,34 €
Single-core stranded wire, fine-stranded conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distributors, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling, and regulating. Not permitted for direct installation under plaster. Approved for the internal wiring of equipment for a mains voltage of up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; DC current Uo/U = 495/825 V; Test AC voltage = 2000 V - Installation note: For wiring in luminaires where the connection area of the wires is not protected from UV radiation and heat (generated by the lamps), a protective sleeve must always be pushed over the exposed wires. Otherwise, decomposition of the insulation will occur depending on the duty cycle.
Technical Data
Cable type
H05V-K
Cross-section
0.5mm²
Color
Brown
Nominal voltage
300/500V
Standard
VDE 0281
0.5mm² Grau
EBROM H05V-K flexible single-core cable 0.5mm² grey
0,34 €
Single-core stranded, fine-stranded wires of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear, and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in high-voltage installations for the purpose of measuring, controlling, and regulating. Not permitted for direct installation under plaster. Approved for internal wiring of equipment for mains voltages up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; DC current Uo/U = 495/825 V; Test AC voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the wires is not protected from UV radiation and heat (caused by the light sources), a protective sleeve must always be slid over the exposed wires. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
0.5mm²
Colour
Grey
Nominal voltage
300/500V
Standard
VDE 0281
0.5mm² Weiss
EBROM H05V-K flexible single-core wire 0.5mm² white
0,34 €
Single core, multi-stranded, fine-stranded conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and control cabinets, in conduits on and under plaster as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. Approved for internal wiring of equipment for mains voltages up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; DC current Uo/U = 495/825 V; AC test voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the wires is not protected from UV radiation and heat (caused by the illuminants), a protective sleeve must always be pushed over the exposed wires. Otherwise, the insulation will decompose depending on the duty cycle.
Technical data
Cable type
H05V-K
Cross-section
0.5mm²
Colour
White
Nominal voltage
300/500V
Standard
VDE 0281
0.5mm² Gelb
EBROM H05V-K flexible single-core wire 0.5mm² yellow
0,34 €
Single-core stranded wire, fine-stranded conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear, and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for measuring, control, and regulation purposes. Not permitted for direct installation under plaster. For internal wiring of devices, approved for mains voltages up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC voltage Uo/U = 330/550 V; DC voltage Uo/U = 495/825 V; AC test voltage = 2000 V - Installation instruction: When wiring in luminaires where the connection area of the cores is not protected from UV radiation and heat (generated by the light sources), a protective sleeve must always be slid over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
0.5mm²
Colour
Yellow
Nominal voltage
300/500V
Standard
VDE 0281
0.5mm² Grün
EBROM H05V-K single core wire flexible 0.5mm² green
0,34 €
Single-core stranded, fine-stranded conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear, and control cabinets, in conduits on or under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling, and regulating. Not permitted for direct installation under plaster. Approved for internal wiring of equipment with a mains voltage of up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and alternating current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; test AC voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the cores is not protected from UV radiation and heat (generated by the lamps), a protective sleeve must always be pushed over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
0.5mm²
Colour
Green
Nominal voltage
300/500V
Standard
VDE 0281
0.5mm² Orange
EBROM H05V-K flexible single-core wire 0.5mm² orange
0,34 €
Multi-strand single core, fine-wired cores of core class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, and in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for measuring, control and regulation purposes. Not permitted for direct installation under plaster. Approved for the internal wiring of equipment with a mains voltage of up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; AC test voltage = 2000 V - Installation note: For wiring in luminaires where the connection area of the cores is not protected from UV radiation and heat (caused by the bulbs), a protective sleeve must always be pushed over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
0.5mm²
Color
Orange
Nominal voltage
300/500V
Standard
VDE 0281
0.5mm² Violett
EBROM H05V-K flexible single-core wire 0.5mm² violet
0,34 €
Single-core stranded, finely stranded conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for measuring, control and regulation purposes. Not permitted for direct installation under plaster. For the internal wiring of equipment, approved for a mains voltage of up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; DC current Uo/U = 495/825 V; Test AC voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the cores is not protected from UV radiation and heat (generated by the lamps), a protective sleeve must always be slid over the exposed cores. Otherwise, the insulation will decompose depending on the duty cycle.
Technical data
Cable type
H05V-K
Cross-section
0.5mm²
Colour
Violet
Nominal voltage
300/500V
Standard
VDE 0281
0.5mm² Hellblau
EBROM H05V-K single core flexible wire 0.5mm² light blue
0,34 €
Stranded single core, fine-stranded conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, and in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. For the internal wiring of equipment, approved for a mains voltage up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: three-phase and AC current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; test AC voltage = 2000 V - Installation note: When wiring luminaires where the connection area of the cores is not protected from UV radiation and heat (caused by the illuminants), a protective sleeve must always be slid over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
0.5mm²
Colour
Light blue
Nominal voltage
300/500V
Standard
VDE 0281
0.5mm² Dunkelblau
EBROM H05V-K flexible single core wire 0.5mm² dark blue
0,34 €
Single-core stranded wire, fine-stranded conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, and in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. For internal wiring of equipment, approved for a mains voltage of up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; AC test voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the cores is not protected against UV radiation and heat (caused by the illuminants), a protective sleeve must always be pushed over the exposed cores. Otherwise, decomposition of the insulation will occur depending on the duty cycle.
Technical data
Cable type
H05V-K
Cross-section
0.5mm²
Colour
Dark blue
Nominal voltage
300/500V
Standard
VDE 0281
0.5mm² Grün/Gelb
EBROM H05V-K flexible single-core wire 0.5mm² Green/Yellow
0,34 €
Stranded single core, class 5 fine-stranded wires according to VDE 0281, for use in dry rooms, in equipment, switchgear, and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power systems for measuring, control, and regulation purposes. Not permitted for direct installation under plaster. Approved for the internal wiring of equipment with a mains voltage up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Rated voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and alternating current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; test AC voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the wires is not protected from UV radiation and heat (generated by the lamps), a protective sleeve must always be pushed over the exposed wires. Otherwise, the insulation will decompose depending on the duty cycle.
Technical data
Cable type
H05V-K
Cross-section
0.5mm²
Color
Green/Yellow
Rated voltage
300/500V
Standard
VDE 0281
0.75mm² Schwarz
EBROM H05V-K flexible single-core wire 0.75mm² black
0,40 €
Single-core stranded wire, fine-stranded conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on light fittings. In and on electronic equipment in power installations for the purpose of measuring, controlling and regulating. Not permitted for direct laying under plaster. Approved for the internal wiring of equipment for mains voltages up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; AC test voltage = 2000 V - Installation note: When wiring in light fittings where the connection area of the wires is not protected from UV radiation and heat (generated by the bulbs), a protective sleeve must always be pushed over the exposed wires. Otherwise, decomposition of the insulation will occur depending on the operating time.
Technical data
Cable type
H05V-K
Cross-section
0.75mm²
Color
Black
Nominal voltage
300/500V
Standard
VDE 0281
0.75mm² Rot
EBROM H05V-K flexible single-core wire 0.75mm² red
0,40 €
Single-core stranded wire, fine-stranded conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling, and regulating. Not permitted for direct installation under plaster. For the internal wiring of equipment approved for a mains voltage of up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; test AC voltage = 2000 V - Installation note: When wiring luminaires where the connection area of the wires is not protected from UV radiation and heat (caused by the light sources), a protective sleeve must always be slid over the exposed wires. Otherwise, decomposition of the insulation will occur depending on the operating time.
Technical data
Cable type
H05V-K
Cross-section
0.75mm²
Color
Red
Nominal voltage
300/500V
Standard
VDE 0281
0.75mm² Braun
EBROM H05V-K flexible single-core wire 0.75mm² brown
0,40 €
Single-core stranded wire, fine-stranded conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power systems for measuring, control, and regulation purposes. Not permitted for direct installation under plaster. For internal wiring of equipment, approved for a mains voltage up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; AC test voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the wires is not protected from UV radiation and heat (generated by the lamps), a protective sleeve must always be slid over the exposed wires. Otherwise, decomposition of the insulation will occur, depending on the duration of operation.
Technical data
Cable type
H05V-K
Cross-section
0.75mm²
Colour
Brown
Nominal voltage
300/500V
Standard
VDE 0281
Our Videos
Learn more about our products and find out the most important information about cables
What does EBROM stand for?
Copper or aluminum?
Diameter vs. cross-section
HI-FLEX highly flexible
FLY Automotive Cables
Perfect pressings
Cable lugs DIN comparison
Free standard shipping to Germany from €60
Fast shipping within GermanyIn-house German assembly
Cable assemblies from our own productionSpecialist Consulting
Consultation by phone at 08074/9176911