All products
All cables
Analog and digital room thermostats
Automotive cables
Battery cable
Bell and lighting concepts
Blind switch
Cable by the metre
Campervan
Control cables
Data cable
Flexible cables
Flush-mounted radio
HI-FLEX battery cable
House
Installation cable
Light switches & dimmers
Network sockets
Other
Photovoltaics
Power cables
Rubber cable
Sauna
Silicone cables
Single-core wires
Sockets, Switches & Accessories
Solar cable
Special cable
TV SAT Radio Outlet Systems
Underground cable
Wall sockets
Welding cable
Workshop
3x1.5mm² Schwarz
EBROM NYY-J Underground Cable 3x1.5mm² Black
1,70 €
Underground cable NYY-J with copper conductor 3x1.5mm². Suitable for fixed installation in cable ducts, outdoors, underground, and in water, but also possible indoors (indoors typically NYM-J ... mm² in GREY) provided that no special mechanical stresses are to be expected.
Technical Data
Cable type
NYY-J
Cross-section
3x1.5mm²
Colour
Black
Temperature range
-5°C to +50°C
1.5mm² Schwarz
EBROM FLRY Automotive Cable 1.5mm² Black
1,20 €
EBROM FLY (10 to 50 mm²) and FLRY (0.75 mm² to 6 mm²) vehicle cable (also popular as a battery cable) – special PVC sheath, Shore hardness of 90 ± 5 with high temperature resistance (-40 °C to +105 °C). Avoid direct contact with hot parts. Standards ISO 6722-1 // ISO 4141-3 // DIN 72551/2 // FCA MS.90034 – Application as battery cable – starter cable – vehicle cable – caravan – motorcycle – boat and much more – 100% copper - extremely easy to process and install due to the flexible sheathing and also the flexible properties of the many copper strands – no cable breakage - highest quality level – A quality product from the cable professionals at EBROM®
Technical data
Cable type
FLRY
Cross-section
1.5mm²
Color
Black
Standard
ISO 4141-3, ISO 6722-1
Temperature range
-40°C to +105°C
2.5mm² Schwarz
EBROM FLRY Vehicle Cable 2.5mm² Black
1,43 €
EBROM FLY (10 to 50 mm²) and FLRY (0.75 mm² to 6 mm²) vehicle cable (also popular as battery cable) – jacket made of special PVC, Shore hardness of 90 ± 5 with high temperature resistance (-40 °C to +105 °C). Avoid direct contact with hot parts. Standards ISO 6722-1 // ISO 4141-3 // DIN 72551/2 // FCA MS.90034 – Application as battery cable – starter cable – vehicle cable – caravan – motorcycle – boat and much more – 100% copper - extremely easy to process and install due to the flexible sheathing and the flexible properties of the many copper strands – no cable breakage - highest quality level – A quality product from the cable professionals at EBROM®
Technical data
Cable type
FLRY
Cross-section
2.5mm²
Color
Black
Standard
ISO 4141-3, ISO 6722-1
Temperature range
-40°C to +105°C
5x2.5mm² Schwarz
EBROM H07RN-F rubber cable 5x2.5mm² black
5,06 €
Installation cable, including for the supply line of your electric vehicle charging station. The extremely robust H07RN-F rubber cable is preferred by many electricians for the supply line to your charging station. With this cable, the frustrations of overly rigid cables are a thing of the past. Due to its high flexibility and mechanical robustness, the cable is also excellent for installation in conduits. It is ideally suited for installation in both dry and damp rooms. Furthermore, it offers excellent resistance to oil, gasoline, alkalis, fats, and chemicals. The cable is standardized according to EN 50525-2-21, EN 60228, EN 60811, EN 50363, and EN 60332-1-2; it consists of fine-wired, bare copper strands, and the insulation and outer sheath are made of rubberized neoprene. Technical data: Nominal voltage U0/U: 450/750 V; Test voltage: 2500 V; Temperature range: moved -25 °C to +60 °C, fixed installation -40 °C to +60 °C. The rubber cable offers maximum safety and flexibility for the optimal supply of your electric vehicle charging station. Industrial applications: Industrial plants and machinery where it is exposed to high mechanical stress. Outdoors: Due to its weather resistance and ability to withstand temperature fluctuations, it is excellently suited for outdoor use, e.g., in garden tools, outdoor lighting, or on construction sites. Event technology: In event technology, the cable is also very popular due to its robustness and flexibility. It is frequently used for cabling stage and event equipment, including speakers, lights, and other equipment. Heating and air conditioning technology: The cable is also frequently used in heating and air conditioning technology.
Technical data
Cable type
H07RN-F
Cross-section
5x2.5mm²
Color
Black
Nominal voltage
450/750V
Standard
VDE 0282
Temperature range
-25°C to +60°C
3x1.5mm² Schwarz
EBROM H05VV-F PVC flexible cable 3x1.5mm² black
2,64 €
Flexible cable/appliance cord H05VV-F according to VDE 0281 Application: In dry rooms for connecting portable electrical appliances under medium mechanical stress; for hand-held devices also in damp and wet rooms (refrigerators, spin dryers, etc.) Technical data: Nominal voltage Uo/U: 300/500 V Maximum permissible operating voltage: Three-phase and AC Uo/U: 330/550 V; DC Uo/U: 495/825 V AC test voltage: 2000 V Further properties: Fire behavior class according to EN 13501-6: Eca Flame retardant according to EN 50265-2-1 Conductor class: Class 5 = fine-stranded Core insulation material: PVC Core identification: with colors Sheath material: PVC Permissible cable outer temperature during installation/handling: -10...70 °C Permissible cable outer temperature after installation without vibration: -10...60 °C Max. permissible conductor temperature: 60 °C
Technical data
Cable type
H05VV-F
Cross-section
3x1.5mm²
Color
Black
Nominal voltage
300/500V
3x0.75mm² Rotbraun
EBROM SIHF silicone cable 3x0.75mm² red-brown
2,84 €
Heat-resistant flexible cable SIHF-J. Construction: Finely stranded, flexible conductor made of tinned copper wires. Insulation: Silicone rubber, cores stranded, outer sheath made of silicone rubber, preferably reddish-brown (requirements and testing according to VDE 0250). Use: As a flexible connecting cable for appliances exposed to high temperatures, as well as in switchgear and systems with high internal or external thermal stress. Technical data: -Nominal voltage: 300/500 V, -Temperature range: -50°C to +180°C in continuous operation, briefly up to +250°C, -Bending radius (BR): 10 x D.
Technical data
Cable type
SIHF
Cross-section
3x0.75mm²
Color
Reddish-brown
3x1.5mm² Grau
EBROM NYM-J Installation Cable 3x1.5mm² Grey
1,52 €
Sheathed cable/installation cable with copper conductor 3x1.5mm². Suitable for installation in homes, industry, outdoors, in dry and damp rooms, on, in, and under plaster, in masonry, and in concrete (excluding vibrated or tamped concrete). --- For outdoor use, the cable must be protected from direct sunlight.
Technical Data
Cable type
NYM-J
Cross-section
3x1.5mm²
Color
Gray
6mm² Schwarz
EBROM H07V-K flexible single-core wire 6mm² black
2,40 €
H07V-K flexible wiring cable High-quality flexible multi-strand wiring cable. Technical information Reaction to fire class according to EN 13501-6: Eca Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Class 5 = fine-stranded Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Fine-stranded VDE 0281 Usage: In dry rooms, in equipment, switchgear and distribution cabinets, in conduits on or under plaster as well as for protected installation in luminaires. Not permitted for: direct installation in plaster! Installation on cable trays, in troughs (except covered plastic troughs) and the like. Approved for the internal wiring of devices for a mains voltage up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U = 450/750 V Maximum permissible operating voltage: Three-phase and AC voltage Uo/U = 495/825 V; DC voltage Uo/U = 743/1238 V; Test AC voltage = 2500 V Installation note: When wiring in luminaires where the connection area of the cores is not protected from UV radiation and heat (generated by the light sources), a protective tube must always be slid over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H07V-K
Cross-section
6mm²
Colour
Black
2.5mm² Schwarz
EBROM H07V-K flexible core cable 2.5mm² black
0,72 €
H07V-K flexible wiring cable High-quality flexible multi-strand wiring cable. Technical information Reaction to fire class according to EN 13501-6: Eca Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Class 5 = fine-stranded Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Fine-stranded VDE 0281 Usage: In dry rooms, in equipment, switchgear and distribution cabinets, in conduits on or under plaster as well as for protected installation in luminaires. Not permitted for: direct installation in plaster! Installation on trays, in conduits (except for covered plastic conduits) and the like. For the internal wiring of devices approved for a mains voltage up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U = 450/750 V Maximum permissible operating voltage: Three-phase and AC voltage Uo/U = 495/825 V; DC voltage Uo/U = 743/1238 V; Test AC voltage = 2500 V Installation note: When wiring in luminaires where the connection area of the cores is not protected from UV radiation and heat (caused by the light sources), a protective sleeve must always be slid over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H07V-K
Cross-section
2.5mm²
Color
Black
1.5mm² Schwarz
EBROM H07V-K flexible single-core wire 1.5mm² black
0,48 €
H07V-K flexible wiring cable High-quality flexible stranded wiring cable. Technical information Reaction to fire class according to EN 13501-6: Eca Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2 Conductor class: Class 5 = fine-stranded Core insulation material: PVC Max. permissible conductor temperature: 70 °C Nominal voltage U: 750 V Nominal voltage U0: 450 V Permissible cable outer temperature during installation/handling: 5...70 °C Permissible cable outer temperature after installation without vibration: -25...70 °C Fine-stranded VDE 0281 Application: In dry rooms, in equipment, switchgear and distribution systems, in conduits on or under plaster as well as for protected installation in light fixtures. Not permitted for: direct installation in plaster! Installation on trays, in channels (except for covered plastic channels) and the like. Approved for internal wiring of equipment for a mains voltage up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C Technical data: Nominal voltage Uo/U = 450/750 V Maximum permissible operating voltage: Three-phase and AC voltage Uo/U = 495/825 V; DC voltage Uo/U = 743/1238 V; Test AC voltage = 2500 V Installation note: When wiring in light fixtures where the connection area of the cores is not protected from UV radiation and heat (caused by the light sources), a protective sleeve must always be pushed over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H07V-K
Cross-section
1.5mm²
Colour
Black
50mm² Schwarz
EBROM HI-FLEX battery cable highly flexible 50mm² black
31,74 €
HIGHLY flexible EBROM battery cable Type: HI-FLEX (also known as: Hi-Flex PVC Welding Cable) Easy to process and install due to the extremely flexible properties of the many copper strands and the special sheath. 99.9% OFC full copper, highest quality level. Technical data Operating temperature: -30°C to +70°C for fixed installation Operating temperature: +5°C to +70°C for mobile use Please check the temperature of the place/area of use before application!! Minimum installation temperature: 0°C - Maximum temperature during short circuit +160°C at the conductor (max. duration 5 seconds) Protected installation is recommended! Not for use outdoors or in the ground Keep away from hot components and oils! Article class and specifications Article class: Single-core cable Conductor class: Cl.5 = finely stranded Core insulation: PVC (70 ± 5 Shore) Nominal voltage: U0 450 V, U 750 V Standards according to: IEC 20-29 IEC 20-52 EN 60332-1 IEC 50265 Conductor material: Copper, bare, 99.99% OFC With a finely stranded copper wire, the nominal cross-section cannot be reliably determined from the diameter of the wire bundle, not even with a caliper. Use the cable imprint or the data sheet. The circular area calculation using the circle formula A = π × d² / 4 applies to a solid, circular conductor. The sheath and insulation are not part of the conductor area. We are happy to help if you have any questions regarding classification.
Technical data
Cable type
HI-FLEX
Cross-section
50mm²
Color
Black
25mm² Schwarz
EBROM HI-FLEX battery cable highly flexible 25mm² black
17,00 €
HIGHLY flexible EBROM battery cable type: HI-FLEX (also known as: Hi-Flex PVC Welding Cable) Easy to process and install due to the extremely flexible properties of the many copper strands and the special sheathing. 99.9% OFC full copper, highest quality level. Technical data Operating temperature: -30° C to +70° C fixed installation Operating temperature: +5° C to +70° C mobile use Please check the temperature of the place/area of use before application!! Minimum installation temperature: 0° C - Maximum temperature in case of short circuit + 160° C at the conductor (max. duration 5 seconds) Protected installation is recommended! Not for outdoor or underground use Keep away from hot components and oils! Article class and specifications Article class: Core cable Conductor class: Class 5 = finely stranded Core insulation: PVC (70 ± 5 Shore) Nominal voltage: U0 450 V, U 750 V Standards according to: IEC 20-29 IEC 20-52 EN 60332-1 IEC 50265 Conductor material: Copper, bare, 99.99% OFC With a finely stranded copper wire, the nominal cross-section cannot be reliably determined from the diameter of the wire bundle, not even with a caliper. Use the cable imprint or the data sheet. The circular area calculation using the circle formula A = π × d² / 4 applies to a solid, circular conductor. Sheath and insulation are not part of the conductor area. We are happy to help if you have any questions about classification.
Technical data
Cable type
HI-FLEX
Cross-section
25mm²
Color
Black
Our Videos
Learn more about our products and find out the most important information about cables
What does EBROM stand for?
Copper or aluminum?
Diameter vs. cross-section
HI-FLEX highly flexible
FLY Automotive Cables
Perfect pressings
Cable lugs DIN comparison
Free standard shipping to Germany from €60
Fast shipping within GermanyIn-house German assembly
Cable assemblies from our own productionSpecialist Consulting
Consultation by phone at 08074/9176911