All products
All cables
Analog and digital room thermostats
Automotive cables
Battery cable
Bell and lighting concepts
Blind switch
Cable by the metre
Campervan
Control cables
Data cable
Flexible cables
Flush-mounted radio
HI-FLEX battery cable
House
Installation cable
Light switches & dimmers
Network sockets
Other
Photovoltaics
Power cables
Rubber cable
Sauna
Silicone cables
Single-core wires
Sockets, Switches & Accessories
Solar cable
Special cable
TV SAT Radio Outlet Systems
Underground cable
Wall sockets
Welding cable
Workshop
0.75mm² Grau
EBROM H05V-K flexible single-core cable 0.75mm² grey
0,40 €
Single-core stranded wire, fine-wired cores of class 5 according to VDE 0281, for use in dry rooms, in devices, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on lighting fixtures. In and on electronic equipment in power systems for measuring, control, and regulation purposes. Not permitted for direct installation under plaster. Approved for internal wiring of devices for a mains voltage up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; test AC voltage = 2000 V - Installation note: For wiring in lighting fixtures where the core connection area is not protected from UV radiation and heat (caused by the illuminants), a protective sleeve must always be pushed over the exposed cores. Otherwise, degradation of the insulation will occur depending on the operating time.
Technical data
Cable type
H05V-K
Cross-section
0.75mm²
Color
Grey
Nominal voltage
300/500V
Standard
VDE 0281
0.75mm² Weiss
EBROM H05V-K flexible single-core wire 0.75mm² white
0,40 €
Multi-strand single core, fine-wired cores of core class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power systems for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. For the internal wiring of equipment, approved for a mains voltage of up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; test AC voltage = 2000 V - Installation note: When wiring luminaires where the connection area of the cores is not protected against UV radiation and heat (generated by the lamps), a protective sleeve must always be pushed over the exposed cores. Otherwise, decomposition of the insulation will occur depending on the duty cycle.
Technical data
Cable type
H05V-K
Cross-section
0.75mm²
Colour
White
Nominal voltage
300/500V
Standard
VDE 0281
0.75mm² Gelb
EBROM H05V-K flexible wire 0.75mm² yellow
0,40 €
Single-core stranded wire, fine-wired cores of class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, and in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. For the internal wiring of equipment, approved for a mains voltage of up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and alternating current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; test AC voltage = 2000 V - Installation note: When wiring luminaires where the connection area of the wires is not protected from UV radiation and heat (caused by the lamps), a protective sleeve must always be pushed over the exposed wires. Otherwise, decomposition of the insulation will occur depending on the operating time.
Technical data
Cable type
H05V-K
Cross-section
0.75mm²
Colour
Yellow
Nominal voltage
300/500V
Standard
VDE 0281
0.75mm² Grün
EBROM H05V-K flexible single-core wire 0.75mm² green
0,40 €
Single-core stranded wire, fine-stranded conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in devices, switchgear and distribution boards, in conduits on and under plaster, and in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. Approved for the internal wiring of equipment for mains voltages up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; AC test voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the wires is not protected from UV radiation and heat (generated by the lamps), a protective sleeve must be placed over the exposed wires. Otherwise, depending on the switch-on duration, the insulation will decompose.
Technical data
Cable type
H05V-K
Cross-section
0.75mm²
Colour
Green
Nominal voltage
300/500V
Standard
VDE 0281
0.75mm² Orange
EBROM H05V-K flexible single-core cable 0.75mm² orange
0,40 €
Single-core stranded, fine-wired conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in devices, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling, and regulating. Not permitted for direct installation under plaster. For internal wiring of devices, approved for mains voltages up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; DC current Uo/U = 495/825 V; Test AC voltage = 2000 V - Installation note: For wiring in luminaires where the connection area of the wires is not protected from UV radiation and heat (generated by the bulbs), a protective sleeve must be placed over the exposed wires as a general rule. Otherwise, the insulation will decompose depending on the duration of operation.
Technical data
Cable type
H05V-K
Cross-section
0.75mm²
Color
Orange
Nominal voltage
300/500V
Standard
VDE 0281
0.75mm² Violett
EBROM H05V-K flexible conductor 0.75mm² violet
0,40 €
Single-core stranded, fine-stranded conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on lighting fixtures. In and on electronic equipment in power installations for measuring, control, and regulation purposes. Not permitted for direct installation under plaster. For internal wiring of equipment, approved for a mains voltage up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC Uo/U = 330/550 V; DC Uo/U = 495/825 V; AC test voltage = 2000 V - Installation instruction: When wiring in lighting fixtures where the conductor connection area is not protected from UV radiation and heat (caused by the illuminants), a protective sleeve must always be slid over the exposed conductors. Otherwise, decomposition of the insulation will occur depending on the duty cycle.
Technical Data
Cable type
H05V-K
Cross-section
0.75mm²
Colour
Violet
Nominal voltage
300/500V
Standard
VDE 0281
0.75mm² Hellblau
EBROM H05V-K flexible single-core wire 0.75mm² light blue
0,40 €
Single-core stranded, fine-wired conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling, and regulating. Not permitted for direct installation under plaster. Approved for the internal wiring of equipment with a mains voltage of up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC voltage Uo/U = 330/550 V; DC voltage Uo/U = 495/825 V; AC test voltage = 2000 V - Installation instruction: When wiring in luminaires where the connection area of the wires is not protected from UV radiation and heat (caused by the illuminants), a protective tube must always be pushed over the exposed wires. Otherwise, decomposition of the insulation will occur depending on the operating time.
Technical data
Cable type
H05V-K
Cross-section
0.75mm²
Color
Light blue
Nominal voltage
300/500V
Standard
VDE 0281
0.75mm² Dunkelblau
EBROM H05V-K flexible core wire 0.75mm² dark blue
0,40 €
Single-core stranded, fine-wired conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. For the internal wiring of equipment approved for mains voltage up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC Uo/U = 330/550 V; DC Uo/U = 495/825 V; Test AC voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the wires is not protected against UV radiation and heat (caused by the illuminants), a protective sleeve must always be pushed over the exposed wires. Otherwise, decomposition of the insulation will occur depending on the operating time.
Technical data
Cable type
H05V-K
Cross-section
0.75mm²
Colour
Dark blue
Nominal voltage
300/500V
Standard
VDE 0281
0.75mm² Grün/Gelb
EBROM H05V-K flexible single-core wire 0.75mm² green/yellow
0,40 €
Single-core stranded wire, fine-stranded conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear, and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on lighting fixtures. In and on electronic equipment in power installations for measuring, control, and regulation purposes. Not permitted for direct installation under plaster. For internal wiring of equipment, approved for a mains voltage of up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Rated voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC voltage Uo/U = 330/550 V; DC voltage Uo/U = 495/825 V; Test AC voltage = 2000 V - Installation note: When wiring in lighting fixtures where the connection area of the wires is not protected from UV radiation and heat (caused by the light sources), a protective sleeve must be placed over the exposed wires. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
0.75mm²
Colour
Green/Yellow
Rated voltage
300/500V
Standard
VDE 0281
1.0mm² Schwarz
EBROM H05V-K flexible single-core cable 1.0mm² black
0,47 €
Single-core stranded, fine-stranded conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in devices, switchgear and distributors, in pipes on and under plaster as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. Approved for the internal wiring of devices for a mains voltage up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and alternating current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; test alternating voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the conductors is not protected from UV radiation and heat (caused by the illuminants), a protective tube must always be pushed over the exposed conductors. Otherwise, decomposition of the insulation will occur depending on the duty cycle.
Technical data
Cable type
H05V-K
Cross-section
1.0mm²
Colour
Black
Nominal voltage
300/500V
Standard
VDE 0281
1.0mm² Rot
EBROM H05V-K flexible single-core wire 1.0mm² red
0,47 €
Single-core stranded wire, fine-stranded conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on light fixtures. In and on electronic equipment in power installations for measuring, control and regulation purposes. Not permitted for direct installation under plaster. Approved for the internal wiring of equipment with a mains voltage of up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; direct current Uo/U = 495/825 V; AC test voltage = 2000 V - Installation note: When wiring light fixtures where the connection area of the wires is not protected against UV radiation and heat (caused by the lamps), a protective sleeve must always be slid over the exposed wires. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
1.0mm²
Color
Red
Nominal voltage
300/500V
Standard
VDE 0281
1.0mm² Braun
EBROM H05V-K flexible wire 1.0mm² brown
0,47 €
Single-core stranded wire, fine-stranded conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, and in closed installation ducts. For protected installation in and on light fittings. In and on electronic equipment in power installations for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. Approved for internal wiring of equipment for mains voltages up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC Uo/U = 330/550 V; DC Uo/U = 495/825 V; Test AC voltage = 2000 V - Installation instruction: When wiring in light fittings where the connection area of the wires is not protected from UV radiation and heat (generated by the bulbs), a protective sleeve must always be pushed over the exposed wires. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
1.0mm²
Colour
Brown
Nominal voltage
300/500V
Standard
VDE 0281
1.0mm² Grau
EBROM H05V-K flexible core wire 1.0mm² grey
0,47 €
Single-core stranded, fine-wired conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in devices, switchgear and distributors, in pipes on and under plaster as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. For internal wiring of equipment approved for a mains voltage of up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; DC current Uo/U = 495/825 V; Test AC voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the wires is not protected from UV radiation and heat (caused by the illuminants), a protective tube must always be pushed over the exposed wires. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
1.0mm²
Colour
Grey
Nominal voltage
300/500V
Standard
VDE 0281
1.0mm² Weiss
EBROM H05V-K flexible single-core wire 1.0mm² white
0,47 €
Single-core stranded, finely stranded conductors of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distributors, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling, and regulating. Not permitted for direct installation under plaster. Approved for the internal wiring of equipment with a mains voltage up to 1000 V AC and up to 750 V DC against earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC Uo/U = 330/550 V; DC Uo/U = 495/825 V; Test AC voltage = 2000 V - Installation note: When wiring in luminaires where the connection area of the cores is not protected from UV radiation and heat (caused by the light sources), a protective sleeve must always be pushed over the exposed cores. Otherwise, depending on the duty cycle, decomposition of the insulation will occur.
Technical data
Cable type
H05V-K
Cross-section
1.0mm²
Colour
White
Nominal voltage
300/500V
Standard
VDE 0281
1.0mm² Gelb
EBROM H05V-K flexible core cable 1.0mm² yellow
0,47 €
Single-core stranded wire, fine-stranded conductor of conductor class 5 according to VDE 0281, for use in dry rooms, in equipment, switchgear and distribution boards, in conduits on and under plaster, as well as in closed installation ducts. For protected installation in and on luminaires. In and on electronic equipment in power installations for the purpose of measuring, controlling and regulating. Not permitted for direct installation under plaster. Approved for internal wiring of equipment for a mains voltage up to 1000 V AC and up to 750 V DC to earth. Temperature range: maximum conductor temperature 70 °C - Technical data: Nominal voltage Uo/U = 300/500 V - Maximum permissible operating voltage: Three-phase and AC current Uo/U = 330/550 V; DC current Uo/U = 495/825 V; Test AC voltage = 2000 V - Installation note: When wiring luminaires where the connection area of the wires is not protected from UV radiation and heat (generated by the lamps), a protective sleeve must always be pushed over the exposed wires. Otherwise, decomposition of the insulation will occur depending on the operating time.
Technical data
Cable type
H05V-K
Cross-section
1.0mm²
Color
Yellow
Nominal voltage
300/500V
Standard
VDE 0281
Our Videos
Learn more about our products and find out the most important information about cables
What does EBROM stand for?
Copper or aluminum?
Diameter vs. cross-section
HI-FLEX highly flexible
FLY Automotive Cables
Perfect pressings
Cable lugs DIN comparison
Free standard shipping to Germany from €60
Fast shipping within GermanyIn-house German assembly
Cable assemblies from our own productionSpecialist Consulting
Consultation by phone at +49 8074 9176911