Products (1967)

Installation cable, among other uses, for the supply of EV charging stations. Highly flexible 5x10 mm². The cable of choice for many electricians for supply lines to your charging station. The annoyances of an overly rigid cable are a thing of the past. Due to its flexible properties, this cable is wonderful to install. Suitable for installation in dry and damp rooms. Thermal resistance and extensive resistance to oil, gasoline, alkalis, greases, chemicals, etc. Design based on VDE Decision No. 41, VDE 0250, 0271, 0281 and 0293; finely stranded, bare copper wire according to VDE 0295, PVC core insulation, outer sheath material: PVC, color: gray - Technical data: Operating voltage max. 500 V, test voltage rms 2000 V, breakdown voltage >5 kV, insulation resistance min. 20 MΩ/km, temperature range: moved -5 °C to +80 °C, fixed installation -20 °C to +80 °C, minimum bending radius: for fixed installation: 6 x outer diameter, for mobile use: 15 x outer diameter – APPLICATION EXAMPLES: Industry: The cable can be used as a supply line for machines and systems. - Building technology: It can be used for wiring circuits in buildings - Event technology: The cable is well suited for use in event technology, for example for the power supply of stage and lighting equipment - Solar systems: The cable can also be used as a supply line for solar systems to feed the generated electricity into the power grid - Shipbuilding and boat building: It can also be used in the shipbuilding and boat building industry, for example for the power supply of motors or electrical systems on board ---SAFETY NOTE--- According to DIN VDE 0100-520, flexible cables such as YSLY are permitted for fixed installation, provided they are housed throughout in conduits or equivalent protective measures. If protective measures against mechanical damage are not observed, use is not permitted Technical data Cable type YSLY-JB Cross-section 5x10mm² Color Gray Standard VDE 0250 Temperature range -5°C to +80°C

Installation cable for the power supply of your electric vehicle charging station. The extremely robust 5x16 mm² H07RN-F rubber cable. It is preferred by many electricians for the supply line to your charging station. With this cable, the annoyances of a cable that is too rigid are a thing of the past. Due to its high flexibility and mechanical robustness, the H07RN-F rubber cable can also be laid excellently in conduits. It is ideally suited for installation in both dry and damp rooms. In addition, it offers excellent resistance to oil, petrol, alkalis, fats, and chemicals. The cable is standardized according to EN 50525-2-21, EN 60228, EN 60811, EN 50363, and EN 60332-1-2; it consists of fine-wired, bare copper strands, and the insulation and outer sheath are made of rubberized neoprene, color: black. Technical data: Nominal voltage U0/U: 450/750 V, test voltage: 2500 V, minimum bending radius: for fixed installation: 4 x outer diameter, for mobile use: 6 x outer diameter. Temperature range: flexible -25 °C to +60 °C, fixed installation -40 °C to +60 °C. The rubber cable offers maximum safety and flexibility for the optimal supply of the EV charging station. Industrial applications: Industrial plants and machines where it is exposed to high mechanical loads. Outdoors: Due to its weather resistance and its ability to withstand temperature fluctuations, it is excellently suited for outdoor use, e.g., in garden tools, outdoor lighting, or on construction sites. Event technology: The cable is also very popular in event technology due to its robustness and flexibility. It is frequently used for wiring stage and event technology, including speakers, lights, and other equipment. Heating and air conditioning technology: The cable is also frequently used in heating and air conditioning technology, as it withstands heat and cold well and is also resistant to liquids and chemicals. Technical data Cable type H07RN-F Cross-section 5x16mm² Color Black Nominal voltage 450/750V Standard VDE 0282 Temperature range -25°C to +60°C

NYY-J underground cable with copper conductor 5x16mm² Suitable for fixed installation in cable ducts, outdoors, underground, in water, but also suitable for indoor use (indoors typically NYM-J ... mm² in GREY) provided no special mechanical stresses are expected Technical data Cable type NYY-J Cross-section 5x16mm² Colour Black Temperature range -5°C to +50°C

Sheathed cable/installation cable with copper conductor 5x16mm². Suitable for installation in homes, industry, outdoors, in dry and damp rooms, on, in, and under plaster, in masonry and concrete (excluding vibrated, shaken, or tamped concrete). --- For outdoor use, the cable must be protected from direct sunlight. Technical data Cable type NYM-J Cross-section 5x16mm² Colour Grey

Installation cable, including for the supply of EV charging stations. Highly flexible 5x16 mm². The cable of choice for many electricians for the supply line to your charging station. The annoyances of a cable that is too rigid are a thing of the past. Thanks to its flexible properties, this cable is wonderful to lay. Suitable for installation in dry and damp rooms. Thermal resistance and extensive resistance to oil, petrol, alkalis, greases, chemicals, etc. Design based on VDE decision no. 41, VDE 0250, 0271, 0281 and 0293; finely stranded, bare copper wire according to VDE 0295, PVC core insulation, outer sheath material: PVC, color: gray - Technical data: operating voltage max. 500 V, test voltage eff. 2000 V, breakdown voltage >5 kV, insulation resistance min. 20 MΩ/km, temperature range: moved -5 °C to +80 °C, fixed -20 °C to +80 °C, minimum bending radius: for fixed installation: 6 x outer diameter, for mobile use: 15x outer diameter – APPLICATION EXAMPLES: Industry: The cable can be used as a supply line for machines and systems. - Building services: It can be used for wiring electrical circuits in buildings - Event technology: The cable is well suited for use in event technology, for example for the power supply of stage and lighting equipment - Solar systems: The cable can also be used as a supply line for solar systems to feed the generated electricity into the power grid - Shipbuilding and boat building: It can also be used in the shipbuilding and boat building industry, for example for the power supply of engines or electrical systems on board ---SAFETY NOTE--- According to DIN VDE 0100-520, flexible cables such as YSLY are permitted for fixed installation, provided they are housed throughout in conduits or equivalent protective measures. If protective measures against mechanical damage are not observed, use is not permitted Technical data Cable type YSLY-JB Cross-section 5x16mm² Color Gray Standard VDE 0250 Temperature range -5°C to +80°C

Power cable with copper conductor 5x25 mm² for installation outdoors, underground, and in water Technical data Cable type NYY-J Cross-section 5x25mm² Colour Black Temperature range -5°C to +50°C

Sheathed cable/installation cable with copper conductor 5x25mm² Suitable for installation in homes, industry, outdoors, in dry and damp rooms, on, in and under plaster, in masonry and in concrete (except for vibrated or tamped concrete). --- For outdoor use, the cable must be protected from direct sunlight. Technical data Cable type NYM-J Cross-section 5x25mm² Colour Grey

Sheathed cable/installation cable with copper conductor 5x35mm². Suitable for installation in homes, in industry, outdoors, in dry and damp rooms, on, in and under plaster, in masonry and in concrete (excluding vibrated, shaken or tamped concrete). --- For outdoor use, the cable must be protected from direct sunlight. Technical data Cable type NYM-J Cross-section 5x35mm² Color Grey

As unfilled local connecting cables for telecommunication systems and private branch exchanges for telephony and signal transmission. They are suitable for installation in the ground, in cable ducts, and in conduits. Construction: According to VDE 0816/2.79, DIN 57816 telecommunication cables for underground installation - solid bare copper conductor, PE insulation sheath, 4 cores stranded into a star quad, the quads stranded into bundles, and the bundles stranded to form the core, core wrapping, composite sheath, i.e., shield made of plastic-coated aluminum tape, firmly bonded to the PE sheath Technical Data Cable type A-2Y(L)2Y Cross-section 6x2x0.6mm² Color Black Standard VDE 0816

The J-Y(St)Y cable is a shielded cable design that is ideal for fixed installation indoors, outdoors (if protected from direct sunlight), and on buildings. It is particularly well-suited for telephone, measuring, and signal transmission. The cable is constructed according to VDE 0815/4.81 DIN 57815 and thus meets the relevant standards -- The cable features shielding that offers excellent interference immunity and maintains signal quality even in the presence of high electromagnetic interference. The cable's design minimizes crosstalk between the wires, resulting in reliable signal transmission --- Another useful feature of the J-Y(St)Y cable is the color coding of the wires, which allows for easy identification and connection of the cores. It is capable of achieving high data transmission rates and offers low signal loss over long distances --- The cable is robust and durable, making it ideal for use in industrial environments and long-term applications. It is flexible and easy to lay, which simplifies installation and reduces installation time --- Overall, the J-Y(St)Y cable offers a reliable and cost-effective solution for telephone, measuring, and signal transmission in various applications. Technical Data Cable type J-Y(St)Y Cross-section 6x2x0.6mm² Color Gray Standard VDE 0815 Temperature range -30°C to +70°C

As unfilled local connecting cables for telecommunication systems and private branch exchanges for telephony and signal transmission. They are suitable for laying underground, in cable ducts, and in conduits. Construction: According to VDE 0816/2.79, DIN 57816 telecommunication cables for underground installation - solid bare copper conductor, PE insulation, 4 cores stranded into a star quad, the quads stranded into bundles and the bundles into a cable core, core wrapping, laminated sheath, i.e., shield made of plastic-coated aluminum tape, firmly bonded to the PE sheath Technical Data Cable type A-2Y(L)2Y Cross-section 6x2x0.8mm² Color Black Standard VDE 0816

The J-Y(St)Y cable is a shielded cable design that is ideal for fixed installation indoors, outdoors (if protected from direct sunlight), and on buildings. It is particularly well-suited for telephony, measurement, and signal transmission. The cable is constructed according to VDE 0815/4.81 DIN 57815 and therefore meets the relevant standards -- The cable features shielding that offers excellent interference immunity and maintains signal quality even in the presence of high electromagnetic interference. The cable's design minimizes crosstalk between the cores, resulting in reliable signal transmission --- Another useful feature of the J-Y(St)Y cable is the color coding of the cores, which allows for easy identification and connection of the wires. It is capable of achieving high data transmission rates and offers low signal loss over long distances --- The cable is robust and durable, making it ideal for use in industrial environments and long-term applications. It is flexible and easy to lay, which simplifies installation and reduces installation time --- Overall, the J-Y(St)Y cable provides a reliable and cost-effective solution for telephony, measurement, and signal transmission in various applications. Technical Data Cable type J-Y(St)Y Cross-section 6x2x0.8mm² Color Gray Standard VDE 0815 Temperature range -30°C to +70°C

Sheathed cable/installation cable with copper conductor 7x1.5mm². Suitable for installation in homes, industry, outdoors, in dry and damp rooms, on, in, and under plaster, in masonry, and in concrete (excluding vibrated, shaken, or tamped concrete). --- For outdoor use, the cable must be protected from direct sunlight. 6 of the 7 cores are numbered to assist you with identification during connection. Green/yellow is color-coded. Technical data Cable type NYM-J Cross-section 7x1.5mm² Color Gray

Sheathed cable/installation cable with copper conductor 7x1.5 mm² sheathed cable VDE 0281, Part 204. Application: For installation over, on, in, and under plaster in dry, damp, and wet rooms as well as in masonry and concrete, excluding direct embedding in vibrated, shaken, or tamped concrete. Also suitable for outdoor use if protected from direct sunlight, but not for underground use. Temperature range: maximum conductor temperature 70° C, Technical data: - Nominal voltage Uo/U = 500 V. Maximum permissible operating voltage - Three-phase current Uo/U = 575 V, - Direct and single-phase alternating current Uo/U - ungrounded = 575 V, - grounded = 330 V, - Test AC voltage = 2000 V. Minimum bending radius: 4 x D (cable diameter). Flame retardant according to VDE 0482-332-1-2/IEC 60332-1-2, outer diameter approx. 11 mm Technical data Cable type NYM-J Cross-section 7x1.5mm² Colour Coloured cores

Heat-resistant cable SIHF-J. Construction: Fine-stranded, flexible conductor made of tinned copper wires. Insulation: Silicone rubber, cores twisted, sheath made of silicone rubber, preferably reddish-brown (requirements and testing according to VDE 0250). Application: As a flexible connecting cable for devices subject to high temperatures, as well as in switchgear and systems exposed to high internal or external thermal stress. Technical data: -Nominal voltage: 300/500 V, -Temperature range: -50°C to +180°C in continuous operation, briefly up to +250°C, -Bending radius: 10 x D. Technical data Cable type SIHF Cross-section 7x1.5mm² Color Reddish-brown