Blind switch (45)

Flush-mounted inserts, blind control units, blind switches, blind switch insert 1-pole, switch with interlocking mechanism. Rated current: 10 AX IEC60669-1, British Standard EN 60669-1

Blind switch insert 2000/4 US – for manual control of blinds & awnings This flush-mounted switch is ideal for the manual control of blind and awning motors. Thanks to the latching function, the rocker remains in the pressed position – for convenient operation without the need for constant holding. Technical features: • Mounting type: Flush-mounted – suitable for standard flush-mounted boxes according to DIN 49073 • Connection type: Plug-in terminal with rear conductor connection and side release lever • Mounting: Spreader or screws • Degree of protection: IP20 – only suitable for dry indoor areas • Switching type: 1-pole switch, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: Not suitable for automatic control systems. The operating force is approx. 2.5 – 3.5 N. ✔️ Convenient control with latching function: This blind switch remains in the pressed position – a single press is enough, and the blind moves automatically to the end position ✔️ Clearly labeled rocker with Up/Down symbols: The included rocker is clearly marked and ensures intuitive operation – ideal for those who prefer classic switch logic. ✔️ Modern design in alpine white: Part of the Balance SI series – the modern, gently curved design with soft lines adds stylish accents to any room and impresses with an elegant, unobtrusive aesthetic. ✔️ Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device ✔️ This set consists of: BUSCH JÄGER frame, blind switch, rocker, and EBROM phase tester - Manufacturer of frame, switch, and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Blind push-button insert 2020/4 US – precise control with reset function This flush-mounted push-button is ideal for the precise manual control of blinds and awnings. The rocker automatically returns to the starting position after being released – ideal for short-time operation or targeted intermediate stops. Technical features: • Mounting type: Flush-mounted – suitable for flush-mounted boxes according to DIN 49073 • Connection type: Plug-in terminal with rear conductor connection and side spring release • Fastening: Spreader or screws • Protection rating: IP20 – for dry interior areas • Switching type: 1-pole push-button, 2 buttons (up/down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: The blind only moves as long as the button is held down. The operating force is approx. 7.0 – 9.0 N – ideal for precise manual control. ✔️ Control with push-button function (momentary): With this blind switch, the button returns to the starting position after being pressed. The blind only moves as long as the button is held down – ideal for precise manual control. ✔️ Ideal for living spaces with short travel distances: Perfect if you do not want to open/close your blinds completely, but want to stop them deliberately and fine-tune them. ✔️ Modern design in alpine white: Part of the Balance SI series – the modern, slightly curved design with soft lines adds stylish accents to any room and impresses with an elegant, unobtrusive aesthetic. ✔️ Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device. ✔️ This set consists of: BUSCH-JAEGER frame, blind push-button, rocker, and EBROM phase tester - Manufacturer of frame, push-button, and rocker: BUSCH-JAEGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Blind switch insert 2000/4 US – for manual control of blinds & awnings This flush-mounted switch is ideal for the manual control of blind and awning motors. Thanks to the latching function, the rocker remains in the pressed position – for convenient operation without the need for constant holding. Technical features: • Installation type: Flush-mounted – suitable for standard flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and side release lever • Mounting: Claw or screw fastening • Degree of protection: IP20 – suitable for dry indoor areas only • Switching type: 1-pole switch, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: Not suitable for automatic control systems. The operating force is approx. 2.5 – 3.5 N. ✔️ Convenient control with latching function: This blind switch stays in the pressed position – one press is enough, and the blind moves automatically to the end position ✔️ Clearly labeled rockers with Up/Down symbols: The included rockers are clearly marked and ensure intuitive operation – ideal for anyone who prefers classic switch logic. ✔️ Modern design in alpine white: Part of the Balance SI series – the modern, slightly curved design with soft lines adds stylish accents to any room and impresses with an elegant, unobtrusive aesthetic. ✔️ Ready-to-install kit put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device - can be installed both horizontally and vertically ✔️ This set consists of: BUSCH JAEGER frame, blind switch, rocker, and EBROM phase tester - Manufacturer of frame, switch, and rocker: BUSCH JAEGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Venetian blind push-button insert 2020/4 US – precise control with return function This flush-mounted push-button is ideal for the precise, manual control of blinds and awnings. The rocker switch automatically returns to its initial position after being released – ideal for short-term operation or targeted intermediate stops. Technical features: • Mounting type: Flush-mounted – suitable for flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and side spring release • Mounting: Spreader or screws • Degree of protection: IP20 – for dry interior areas • Switching type: 1-pole push-button, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: The blind only moves as long as the button is held down. The operating force is approx. 7.0 – 9.0 N – ideal for precise manual control. ✔️ Control with push-button function (non-latching): With this blind switch, the button returns to its initial position after being pressed. The blind only moves as long as the button is held down – ideal for precise manual control. ✔️ Ideal for living spaces with short travel distances: Perfect if you do not want to open/close your blinds completely, but rather stop them at specific positions and fine-tune them. ✔️ Modern design in alpine white: Part of the Balance SI series – the modern, slightly curved design with soft lines adds stylish accents to any room and impresses with an elegant, unobtrusive aesthetic. ✔️ Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the device "Made in Germany" - The installation can be performed both horizontally and vertically ✔️ This set consists of: BUSCH JÄGER frame, blind push-button, rocker and EBROM phase tester - Manufacturer of frame, push-button and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Blind switch insert 2000/4 US – for manual control of blinds & awnings This flush-mounted switch is ideally suited for the manual control of blind and awning motors. Thanks to the latching function, the rocker remains in the pressed position – for convenient operation without having to hold it down. Technical features: • Mounting type: Flush-mounted – suitable for standard flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and side spring release • Mounting: Spreader claws or screws • Degree of protection: IP20 – suitable for dry indoor rooms only • Switching type: 1-pole switch, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: Not suitable for automatic controls. The actuation force is approx. 2.5 – 3.5 N. ✔️ Convenient control with latching function: This blind switch stays in the pressed position – a single press is enough, and the blind moves independently to the end position ✔️ Clearly labeled rockers with Up/Down symbols: The included rockers are clearly marked and ensure intuitive operation – ideal for those who prefer classic switch logic. ✔️ Modern design in alpine white: Part of the Balance SI series – the modern, slightly curved design with soft lines adds stylish accents to any room and impresses with an elegant, unobtrusive aesthetic. ✔️ Ready-to-install set put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device - Mounting can be done both horizontally and vertically ✔️ This set consists of: BUSCH-JAEGER frame, blind switch, rocker, and EBROM phase tester - Manufacturer of frame, switch, and rocker: BUSCH-JAEGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Venetian blind push-button insert 2020/4 US – precise control with reset function This flush-mounted push-button is ideal for the precise, manual control of blinds and awnings. The rocker automatically returns to the starting position after being released – perfect for short-term operation or targeted intermediate stops. Technical features: • Mounting type: Flush-mounted – suitable for flush boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and side spring release • Fastening: Claw or screw • Degree of protection: IP20 – for dry indoor areas • Circuit type: 1-pole push-button, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: The blind only moves as long as the button is held down. The operating force is approx. 7.0 – 9.0 N – ideal for precise manual control. ✔️ Control with push-button function (non-latching): With this blind switch, the button returns to the starting position after being pressed. The blind moves only as long as the button is held down – ideal for precise manual control. ✔️ Ideal for living spaces with short travel distances: Perfect if you do not want to fully open/close your blinds, but rather want to stop them at specific points and fine-tune them. ✔️ Modern design in alpine white: Part of the Balance SI series – the modern, slightly curved design with soft lines adds stylish accents to any room and impresses with an elegant, unobtrusive aesthetic. ✔️ Ready-to-install kit put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device – installation can be done horizontally or vertically ✔️ This set consists of: BUSCH JAEGER frame, blind push-button, rocker, and EBROM phase tester - Manufacturer of frame, push-button, and rocker: BUSCH JAEGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Busch-Jaeger flush-mounted complete set blind switch/button roller shutter switch 2020/4 US (2020/4US) + 1-gang frame + cover with up/down arrow print - alpine white

Flush-mounted inserts, blind control units, blind push-buttons, single-pole blind push-button insert, push-button with interlock. Rated current: 10 A IEC60669-1, British Standard EN 60669-1

Venetian blind switch insert 2000/4 US – for manual control of blinds & awnings This flush-mounted switch is ideal for the manual control of blind and awning motors. Thanks to the latching function, the rocker remains in the pressed position – for convenient operation without the need to hold it down. Technical features: • Mounting type: Flush-mounted – suitable for standard flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and side release lever • Mounting: Claw or screw fixing • Degree of protection: IP20 – suitable for dry indoor areas only • Switching type: 1-pole switch, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: Not suitable for automatic control systems. The actuation force is approx. 2.5 – 3.5 N. ✔️ Convenient control with latching function: This blind switch stays in the pressed position – one press is enough, and the blind moves automatically to the end position ✔️ Clearly labeled rocker with Up/Down symbols: The included rocker is clearly marked and ensures intuitive operation – ideal for those who prefer classic switch logic. ✔️ Subtle design in alpine white: Part of the Reflex SI series – the classic and timeless design with elegant, round shapes blends harmoniously into any living environment and emphasizes a clean, high-quality look. ✔️ Ready-to-install set put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device ✔️ This set consists of: BUSCH JÄGER frame, blind switch, rocker, and EBROM phase tester - Manufacturer of frame, switch, and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Venetian blind push-button insert 2020/4 US – precise control with reset function This flush-mounted push-button is ideal for the precise, manual control of blinds and awnings. The rocker automatically returns to the starting position after being released – ideal for short-term operation or targeted intermediate stops. Technical features: • Mounting type: Flush-mounted – suitable for flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and lateral spring release • Mounting: Expansion claws or screws • Degree of protection: IP20 – for dry indoor areas • Circuit type: 1-pole push-button, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: The blind only moves as long as the button is held down. The actuation force is approx. 7.0 – 9.0 N – ideal for precise manual control. ✔️ Control with momentary function (without latching): With this blind switch, the button returns to the starting position after being pressed. The blind only moves as long as the button is held down – ideal for precise manual control. ✔️ Ideal for living spaces with short travel distances: Perfect if you do not want to fully open/close your blinds, but want to stop them at specific points and fine-tune them. ✔️ Subtle design in alpine white: Part of the Reflex SI series – the classic and timeless design with elegant rounded shapes blends harmoniously into any living environment and emphasizes a clean, high-quality look. ✔️ Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the device "Made in Germany" ✔️ This set consists of: BUSCH JÄGER frame, blind push-button, rocker and EBROM voltage tester - Manufacturer of frame, push-button and rocker: BUSCH JÄGER // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

Venetian blind switch insert 2000/4 US – for manual control of blinds & awnings This flush-mounted switch is ideal for the manual control of blind and awning motors. Thanks to the latching function, the rocker remains in the pressed position – for convenient operation without the need to hold it down. Technical features: • Mounting type: Flush-mounted – suitable for standard flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and side spring release • Mounting: Spreader or screws • Degree of protection: IP20 – suitable for dry indoor areas only • Switching type: 1-pole switch, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: Not suitable for automatic control systems. The actuation force is approx. 2.5 – 3.5 N. ✔️ Convenient control with latching function: This blind switch remains in the pressed position – one press is enough, and the blind moves independently to the end position ✔️ Clearly labeled rockers with Up/Down symbols: The included rockers are clearly marked and ensure intuitive operation – ideal for anyone who prefers classic switch logic. ✔️ Subtle design in alpine white: Part of the Reflex SI series – the classic and timeless design with elegant round shapes blends harmoniously into any living environment and emphasizes a clean, high-quality look. ✔️ Ready-to-install set put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device - Installation can be done horizontally or vertically ✔️ This set consists of: BUSCH JÄGER frame, blind switch, rocker, and EBROM phase tester - Manufacturer of frame, switch, and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Venetian blind push-button insert 2020/4 US – precise control with reset function This flush-mounted push-button is ideal for the precise, manual control of blinds and awnings. The rocker automatically returns to the starting position upon release – ideal for short-term operation or targeted intermediate stops. Technical features: • Mounting type: Flush-mounted – suitable for flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and lateral spring release • Fastening: Claw or screw fastening • Degree of protection: IP20 – for dry indoor areas • Switching type: 1-pole push-button, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: The blind only moves as long as the button is held down. The operating force is approx. 7.0 – 9.0 N – ideal for precise manual control. ✔️ Control with push-button function (non-latching): With this blind switch, the button returns to the starting position after being pressed. The blind only moves as long as the button is held down – ideal for precise manual control. ✔️ Ideal for living spaces with short travel distances: Perfect if you do not want to open/close your blinds completely, but want to stop them at a specific point and fine-tune them. ✔️ Subtle design in alpine white: Part of the Reflex SI series – the classic and timeless design with elegant, rounded shapes blends harmoniously into any living environment and emphasizes a clear, high-quality look. ✔️ Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device – mounting can be done horizontally or vertically ✔️ This set consists of: BUSCH JÄGER frame, blind push-button, rocker, and EBROM phase tester - Manufacturer of frame, push-button, and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Blind switch insert 2000/4 US – for manual control of blinds & awnings This flush-mounted switch is ideal for the manual control of blind and awning motors. Thanks to the latching function, the rocker remains in the pressed position – for convenient operation without the need for constant holding. Technical features: • Installation type: Flush-mounted – suitable for standard flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and side spring release • Mounting: Spreader or screws • Protection class: IP20 – suitable only for dry interior rooms • Circuit type: 1-pole switch, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: Not suitable for automatic control systems. The actuation force is approx. 2.5 – 3.5 N. ✔️ Convenient control with latching function: This blind switch remains in the pressed position – one press is enough, and the blind moves independently to the end position ✔️ Clearly labeled rockers with Up/Down symbols: The included rockers are clearly marked and ensure intuitive operation – ideal for those who prefer classic switch logic. ✔️ Subtle design in alpine white: Part of the Reflex SI series – the classic and timeless design with elegant rounded shapes blends harmoniously into any living environment and emphasizes a clear, high-quality look. ✔️ Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the device "Made in Germany" - Installation can be done either horizontally or vertically ✔️ This set consists of: BUSCH JÄGER frame, blind switch, rocker, and EBROM phase tester - Manufacturer of frame, switch, and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Venetian blind push-button insert 2020/4 US – precise control with return function This flush-mounted push-button is ideal for the precise, manual control of blinds and awnings. The rocker automatically returns to the initial position after being released – ideal for short-term operation or targeted intermediate stops. Technical features: • Mounting type: Flush-mounted – suitable for flush-mounted boxes according to DIN 49073 • Connection type: Plug-in terminal with rear conductor connection and side spring release • Mounting: Expansion claws or screws • Degree of protection: IP20 – for dry indoor areas • Circuit type: 1-pole push-button, 2 buttons (up/down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: The blind only moves as long as the button is held down. The operating force is approx. 7.0 – 9.0 N – ideal for precise manual control. ✔️ Control with push-button function (non-locking): With this blind switch, the button returns to the initial position after being pressed. The blind only moves as long as the button is held down – ideal for precise manual control. ✔️ Ideal for living spaces with short travel paths: Perfect if you do not want to fully open/close your blinds, but want to stop them at specific points and fine-tune them. ✔️ Discreet design in alpine white: Part of the Reflex SI series – the classic and timeless design with elegant rounded shapes blends harmoniously into any living environment and emphasizes a clear, high-quality look. ✔️ Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device – mounting can be done either horizontally or vertically ✔️ This set consists of: BUSCH JÄGER frame, blind push-button, rocker and EBROM phase tester - Manufacturer of frame, push-button and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM