Cables & Wires (229)

Installation cable, including for power supply to EV charging stations. Highly flexible 5x4 mm2. The cable of choice for many electricians when supplying power to your charging station. The annoyance of overly rigid cables is a thing of the past. Due to its flexible properties, this cable is wonderful to install. Suitable for installation in dry and damp rooms. Thermal resistance and high resistance to oil, gasoline, alkalis, fats, chemicals, etc. Design based on VDE Decision No. 41, VDE 0250, 0271, 0281 and 0293; finely stranded, bare copper wire according to VDE 0295, PVC core insulation, outer sheath material: PVC, color: gray - Technical data: Operating voltage max. 500 V, test voltage RMS 2000 V, breakdown voltage >5 kV, insulation resistance min. 20 MΩ/km, temperature range: flexible -5 °C to +80 °C, fixed installation -20 °C to +80 °C, minimum bending radius: for fixed installation: 6 x outer diameter, for flexible use: 15 x outer diameter – APPLICATION EXAMPLES: Industry: The cable can be used as a power supply for machines and systems. - Building technology: It can be used for wiring electrical circuits in buildings - Event technology: The cable is well suited for use in event technology, for example for powering stage and lighting equipment - Solar systems: The cable can also be used as a supply line for solar systems to feed the generated electricity into the power grid - Shipbuilding and boat building: It can also be used in the shipbuilding and boat building industry, for example for powering motors or electrical systems on board ---SAFETY NOTE--- According to DIN VDE 0100-520, flexible cables such as YSLY are permitted for fixed installation provided they are housed throughout in conduits or equivalent protective measures. Use is prohibited if protective measures against mechanical damage are not observed Technical data Cable type YSLY-JB Cross-section 5x4mm² Color Gray Standard VDE 0250 Temperature range -5°C to +80°C

Installation cable for the power supply of your EV charging station. The extremely robust 5x6 mm² H07RN-F rubber cable. It is preferred by many electricians for the supply line to your charging station. With this cable, the annoyances of an overly rigid cable are a thing of the past. Due to its high flexibility and mechanical robustness, the H07RN-F rubber cable can also be excellently laid in conduits. It is ideally suited for installation in both dry and damp rooms. Furthermore, it offers excellent resistance to oil, petrol, alkalis, fats, and chemicals. The cable is standardized according to EN 50525-2-21, EN 60228, EN 60811, EN 50363, and EN 60332-1-2; it consists of fine-wired, bare copper strands, and the insulation and outer sheath are made of rubberized neoprene, color: black. Technical data: Nominal voltage U0/U: 450/750 V, test voltage: 2500 V, minimum bending radius: for fixed installation: 4 x outer diameter, for mobile use: 6 x outer diameter. Temperature range: flexible -25 °C to +60 °C, fixed -40 °C to +60 °C. The rubber cable offers maximum safety and flexibility for the optimal power supply of the EV charging station. Industrial applications: Industrial plants and machinery where it is subjected to high mechanical loads. Outdoors: Due to its weather resistance and ability to withstand temperature fluctuations, it is excellently suited for outdoor use, e.g., in garden tools, outdoor lighting, or on construction sites. Event technology: In event technology, the cable is also very popular due to its robustness and flexibility. It is frequently used for cabling stage and event equipment, including loudspeakers, lights, and other gear. Heating and air conditioning technology: The cable is also frequently used in heating and air conditioning technology, as it withstands heat and cold well and is also resistant to liquids and chemicals. Technical data Cable type H07RN-F Cross-section 5x6mm² Color Black Nominal voltage 450/750V Standard VDE 0282 Temperature range -25°C to +60°C

Underground cable NYY-J with copper conductor 5x6mm² Suitable for fixed installation in cable ducts, outdoors, in the ground, in water, but also possible indoors (indoors typically NYM-J ... mm² in GREY) provided no special mechanical stresses are expected Technical data Cable type NYY-J Cross-section 5x6mm² Colour Black Temperature range -5°C to +50°C

Sheathed cable/installation cable with copper conductor 5x6mm². Suitable for installation in homes, industry, outdoors, in dry and damp rooms, on, in and under plaster, in masonry and in concrete (excluding vibrated, shaken or tamped concrete). --- For outdoor use, the cable must be protected from direct sunlight. Technical data Cable type NYM-J Cross-section 5x6mm² Color Grey

Installation cable, e.g., for supplying electric vehicle charging stations. Very flexible 5x6 mm². The cable of choice for many electricians when supplying power to your charging station. The annoyances of a cable that is too rigid are a thing of the past. Due to its flexible properties, this cable is wonderful to install. Suitable for installation in dry and damp rooms. Thermal resistance and extensive resistance to oil, petrol, alkalis, greases, chemicals, etc. Design based on VDE Decision No. 41, VDE 0250, 0271, 0281 and 0293; finely stranded, bare copper wire according to VDE 0295, PVC core insulation, outer sheath material: PVC, color: gray - Technical data: Operating voltage max. 500 V, test voltage rms 2000 V, breakdown voltage >5 kV, insulation resistance min. 20 MΩ/km, temperature range: moved -5 °C to +80 °C, fixed installation -20 °C to +80 °C, minimum bending radius: for fixed installation: 6 x outer diameter, for mobile use: 15 x outer diameter – APPLICATION EXAMPLES: Industry: The cable can be used as a supply line for machines and systems. - Building services engineering: It can be used for wiring electrical circuits in buildings - Event technology: The cable is well-suited for use in event technology, for example for the power supply of stage and lighting equipment - Solar systems: The cable can also be used as a supply line for solar systems to feed the generated electricity into the power grid - Shipbuilding and boat building: It can also be used in the shipbuilding and boat building industry, for example for the power supply of motors or electrical systems on board ---SAFETY INSTRUCTION--- According to DIN VDE 0100-520, flexible cables such as YSLY are permitted for fixed installation, provided they are housed throughout in conduits or equivalent protective measures. Use is not permitted if protective measures against mechanical damage are not observed Technical data Cable type YSLY-JB Cross-section 5x6mm² Color Gray Standard VDE 0250 Temperature range -5°C to +80°C

Installation cable for the power supply of your EV charging station. The extremely robust 5x10 mm2 H07RN-F rubber cable. It is preferred by many electricians for the supply line to your charging station. With this cable, the annoyances of a cable that is too rigid are a thing of the past. Due to its high flexibility and mechanical robustness, the H07RN-F rubber cable can also be excellently laid in conduits. It is ideally suited for installation in both dry and damp rooms. In addition, it offers excellent resistance to oil, petrol, alkalis, fats, and chemicals. The cable is standardized according to EN 50525-2-21, EN 60228, EN 60811, EN 50363, and EN 60332-1-2; it consists of fine-wired, bare copper strands, and the insulation and outer sheath are made of rubberized neoprene, color: black. Technical data: Nominal voltage U0/U: 450/750 V, test voltage: 2500 V, minimum bending radius: for fixed installation: 4 x outer diameter, for mobile use: 6 x outer diameter. Temperature range: mobile -25 °C to +60 °C, fixed installation -40 °C to +60 °C. The rubber cable offers maximum safety and flexibility for the optimal supply of the EV charging station. Industrial applications: Industrial plants and machinery where it is exposed to high mechanical stress. Outdoors: Due to its weather resistance and ability to withstand temperature fluctuations, it is excellently suited for outdoor use, e.g., in garden equipment, outdoor lighting, or on construction sites. Event technology: The cable is also very popular in event technology due to its robustness and flexibility. It is frequently used for wiring stage and event equipment, including speakers, lights, and other gear. Heating and air conditioning technology: The cable is also frequently used in heating and air conditioning technology, as it withstands heat and cold well and is also resistant to liquids and chemicals. Technical data Cable type H07RN-F Cross-section 5x10mm² Color Black Nominal voltage 450/750V Standard VDE 0282 Temperature range -25°C to +60°C

NYY-J underground cable with copper conductor 5x10mm². Suitable for fixed installation in cable ducts, outdoors, underground, and in water, but also suitable for indoor use (indoor type typically NYM-J ... mm² in GREY) provided no special mechanical stresses are expected. Technical data Cable type NYY-J Cross-section 5x10mm² Color Black Temperature range -5°C to +50°C

Sheathed cable/installation cable with copper conductor 5x10mm². Suitable for installation in homes, in industry, outdoors, in dry and damp rooms, on, in and under plaster, in masonry and in concrete (excluding vibrated, shaken or tamped concrete). --- When used outdoors, the cable must be protected from direct sunlight. Technical data Cable type NYM-J Cross-section 5x10mm² Color Gray

Installation cable, among other uses, for the supply of EV charging stations. Highly flexible 5x10 mm². The cable of choice for many electricians for supply lines to your charging station. The annoyances of an overly rigid cable are a thing of the past. Due to its flexible properties, this cable is wonderful to install. Suitable for installation in dry and damp rooms. Thermal resistance and extensive resistance to oil, gasoline, alkalis, greases, chemicals, etc. Design based on VDE Decision No. 41, VDE 0250, 0271, 0281 and 0293; finely stranded, bare copper wire according to VDE 0295, PVC core insulation, outer sheath material: PVC, color: gray - Technical data: Operating voltage max. 500 V, test voltage rms 2000 V, breakdown voltage >5 kV, insulation resistance min. 20 MΩ/km, temperature range: moved -5 °C to +80 °C, fixed installation -20 °C to +80 °C, minimum bending radius: for fixed installation: 6 x outer diameter, for mobile use: 15 x outer diameter – APPLICATION EXAMPLES: Industry: The cable can be used as a supply line for machines and systems. - Building technology: It can be used for wiring circuits in buildings - Event technology: The cable is well suited for use in event technology, for example for the power supply of stage and lighting equipment - Solar systems: The cable can also be used as a supply line for solar systems to feed the generated electricity into the power grid - Shipbuilding and boat building: It can also be used in the shipbuilding and boat building industry, for example for the power supply of motors or electrical systems on board ---SAFETY NOTE--- According to DIN VDE 0100-520, flexible cables such as YSLY are permitted for fixed installation, provided they are housed throughout in conduits or equivalent protective measures. If protective measures against mechanical damage are not observed, use is not permitted Technical data Cable type YSLY-JB Cross-section 5x10mm² Color Gray Standard VDE 0250 Temperature range -5°C to +80°C

Installation cable for the power supply of your electric vehicle charging station. The extremely robust 5x16 mm² H07RN-F rubber cable. It is preferred by many electricians for the supply line to your charging station. With this cable, the annoyances of a cable that is too rigid are a thing of the past. Due to its high flexibility and mechanical robustness, the H07RN-F rubber cable can also be laid excellently in conduits. It is ideally suited for installation in both dry and damp rooms. In addition, it offers excellent resistance to oil, petrol, alkalis, fats, and chemicals. The cable is standardized according to EN 50525-2-21, EN 60228, EN 60811, EN 50363, and EN 60332-1-2; it consists of fine-wired, bare copper strands, and the insulation and outer sheath are made of rubberized neoprene, color: black. Technical data: Nominal voltage U0/U: 450/750 V, test voltage: 2500 V, minimum bending radius: for fixed installation: 4 x outer diameter, for mobile use: 6 x outer diameter. Temperature range: flexible -25 °C to +60 °C, fixed installation -40 °C to +60 °C. The rubber cable offers maximum safety and flexibility for the optimal supply of the EV charging station. Industrial applications: Industrial plants and machines where it is exposed to high mechanical loads. Outdoors: Due to its weather resistance and its ability to withstand temperature fluctuations, it is excellently suited for outdoor use, e.g., in garden tools, outdoor lighting, or on construction sites. Event technology: The cable is also very popular in event technology due to its robustness and flexibility. It is frequently used for wiring stage and event technology, including speakers, lights, and other equipment. Heating and air conditioning technology: The cable is also frequently used in heating and air conditioning technology, as it withstands heat and cold well and is also resistant to liquids and chemicals. Technical data Cable type H07RN-F Cross-section 5x16mm² Color Black Nominal voltage 450/750V Standard VDE 0282 Temperature range -25°C to +60°C

NYY-J underground cable with copper conductor 5x16mm² Suitable for fixed installation in cable ducts, outdoors, underground, in water, but also suitable for indoor use (indoors typically NYM-J ... mm² in GREY) provided no special mechanical stresses are expected Technical data Cable type NYY-J Cross-section 5x16mm² Colour Black Temperature range -5°C to +50°C

Sheathed cable/installation cable with copper conductor 5x16mm². Suitable for installation in homes, industry, outdoors, in dry and damp rooms, on, in, and under plaster, in masonry and concrete (excluding vibrated, shaken, or tamped concrete). --- For outdoor use, the cable must be protected from direct sunlight. Technical data Cable type NYM-J Cross-section 5x16mm² Colour Grey

Installation cable, including for the supply of EV charging stations. Highly flexible 5x16 mm². The cable of choice for many electricians for the supply line to your charging station. The annoyances of a cable that is too rigid are a thing of the past. Thanks to its flexible properties, this cable is wonderful to lay. Suitable for installation in dry and damp rooms. Thermal resistance and extensive resistance to oil, petrol, alkalis, greases, chemicals, etc. Design based on VDE decision no. 41, VDE 0250, 0271, 0281 and 0293; finely stranded, bare copper wire according to VDE 0295, PVC core insulation, outer sheath material: PVC, color: gray - Technical data: operating voltage max. 500 V, test voltage eff. 2000 V, breakdown voltage >5 kV, insulation resistance min. 20 MΩ/km, temperature range: moved -5 °C to +80 °C, fixed -20 °C to +80 °C, minimum bending radius: for fixed installation: 6 x outer diameter, for mobile use: 15x outer diameter – APPLICATION EXAMPLES: Industry: The cable can be used as a supply line for machines and systems. - Building services: It can be used for wiring electrical circuits in buildings - Event technology: The cable is well suited for use in event technology, for example for the power supply of stage and lighting equipment - Solar systems: The cable can also be used as a supply line for solar systems to feed the generated electricity into the power grid - Shipbuilding and boat building: It can also be used in the shipbuilding and boat building industry, for example for the power supply of engines or electrical systems on board ---SAFETY NOTE--- According to DIN VDE 0100-520, flexible cables such as YSLY are permitted for fixed installation, provided they are housed throughout in conduits or equivalent protective measures. If protective measures against mechanical damage are not observed, use is not permitted Technical data Cable type YSLY-JB Cross-section 5x16mm² Color Gray Standard VDE 0250 Temperature range -5°C to +80°C

Power cable with copper conductor 5x25 mm² for installation outdoors, underground, and in water Technical data Cable type NYY-J Cross-section 5x25mm² Colour Black Temperature range -5°C to +50°C

Sheathed cable/installation cable with copper conductor 5x25mm² Suitable for installation in homes, industry, outdoors, in dry and damp rooms, on, in and under plaster, in masonry and in concrete (except for vibrated or tamped concrete). --- For outdoor use, the cable must be protected from direct sunlight. Technical data Cable type NYM-J Cross-section 5x25mm² Colour Grey