All products
All cables
Analog and digital room thermostats
Automotive cables
Battery cable
Bell and lighting concepts
Blind switch
Cable by the metre
Campervan
Control cables
Data cable
Flexible cables
Flush-mounted radio
HI-FLEX battery cable
House
Installation cable
Light switches & dimmers
Network sockets
Other
Photovoltaics
Power cables
Rubber cable
Sauna
Silicone cables
Single-core wires
Sockets, Switches & Accessories
Solar cable
Special cable
TV SAT Radio Outlet Systems
Underground cable
Wall sockets
Welding cable
Workshop
REV PrimaLuxe light switch for LED lamps 5-100W and incandescent bulbs 25-300W, white, dimmer + frame
34,22 €
REV PrimaLuxe light switch for 5-100W LED lamps and 25-300W incandescent bulbs, white, dimmer + frame
REV Ritter (2 x) LED rotary dimmer + Busch-Jaeger dimmer covers 2115-212 and light switch 2000/6 US in DURO2000 cream white glossy, including EBROM voltage tester for installation of the devices ET1 66012B
123,76 €
Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting from 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmer, 2 x Busch-Jäger dimmer dial, light switch (two-way ON/OFF switch), rocker, and triple frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse protection: Miniature fuse: F2AH/250V~ - Operating principle: Trailing edge With the Busch-Jäger components included in the set, you can effortlessly retrofit this REV dimmer so that it blends perfectly with the existing design of your Busch-Jäger switch system at home. Ready-to-install set assembled for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo shows the horizontal mounting configuration Manufacturer LED dimmer: REV RITTER, dimmer dials, switches, switch rocker, and triple frame: Busch-Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM
REV Ritter (2 x) LED rotary dimmer + Busch-Jaeger dimmer covers 2115-212 and light switch 2020 US in DURO2000 cream white glossy, including EBROM voltage tester for mounting the devices ET1 66012B
122,72 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting from 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white, including frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmer, 2 x Busch-Jaeger dimmer knob, light switch (push-button with spring mechanism - returns to its original position after being pressed), rocker, and triple frame - The system features the Busch-Jaeger design: DURO2000 glossy cream white Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jaeger components included in the set, you can easily adapt this REV dimmer so that it fits perfectly into the existing design of your Busch-Jaeger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer: REV RITTER; dimmer knobs, push-buttons, rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter (2 x) LED rotary dimmer + Busch-Jaeger dimmer covers 2115-212 and socket 20EUC-212 in DURO2000 cream white glossy including EBROM phase tester for mounting the devices ET1 66012B
130,00 €
Flush-mounted dimmer suitable for a wide range of light sources, simple incandescent bulbs or LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmer, 2 x Busch-Jäger dimmer knob, socket and triple frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knobs, socket and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA FROM EBROM
REV Ritter (2 x) LED rotary dimmer + Busch-Jaeger dimmer covers 2115-212 and socket with child protection 20EUCKS-212 in DURO2000 cream white glossy + EBROM phase tester for installation of the devices
140,30 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmer, 2 x Busch-Jaeger dimmer knob, socket with child protection, and triple frame - The system is in the Busch-Jaeger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, low-voltage halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jaeger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knobs, socket with child protection, and triple frame: Busch-Jaeger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED (5-100 Watt) Dimmer PrimaLuxe, white, trailing edge rotary dimmer (incandescent lamp 25-300 Watt) incl. frame and dimmer knob, flush-mounted LED rotary dimmer
35,25 €
Flush-mounted dimmer suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting at 5 watts; no interference, flickering, or similar artifacts. Trailing-edge phase dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs, 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts; incandescent bulbs: 25 to 300 watts; electronic transformer load: 20 to 300 VA. Also compatible with Busch-Jaeger (Reflex SI, DURO 2000, Balance SI), Gira System 55, Merten System M, and Jung A 500, AS 500, CD 500; adapter ring included.
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 2115-212 + intermediate switch 2000/7US + socket 20EUC-212 DURO2000 cream white glossy + EBROM phase tester for mounting the devices ET1 66012B
77,99 €
Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs. Starts from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary control, white, with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Can be used for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jaeger dimmer knob, intermediate switch (for intermediate switching), rocker, socket, and triple frame - The system features the Busch-Jaeger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED bulbs: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge phase With the Busch-Jaeger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, intermediate switch, intermediate switch rocker, and 3-gang frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover plate 2115-212 + intermediate switch 2000/7US + socket with child protection 20EUCKS-212 DURO2000 cream white + EBROM phase tester for installation of the devices
91,42 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, intermediate switch (for intermediate switching), rocker, socket with child protection, and triple frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED bulbs: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly convert this REV dimmer so that it blends perfectly into the existing design of your home's Busch-Jäger switch system. Ready for installation and put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, intermediate switch, intermediate switch rocker, and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 2115-212 + light switch 2000/6 US + socket 20EUC-212 DURO2000 cream white glossy + EBROM phase tester for installation of the devices ET1 66012B
74,78 €
Flush-mounted dimmer suitable for a wide range of light sources, simple incandescent bulbs or LEDs, from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, light switch (two-way ON/OFF switch), rocker, socket, and triple frame - The system features the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV-halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dial, socket, switch, switch rocker, and 3-gang frame: Busch-Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 2115-212 + light switch 2000/6 US + socket with child protection 20EUCKS-212 DURO2000 cream white + EBROM phase tester for installing the devices
84,23 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting from 5 watts, no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary adjustment, white, including frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, light switch (two-way switch ON/OFF), rocker, socket with child protection, and triple frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Assembled and ready for installation for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer: REV RITTER; dimmer dial, socket, switch, switch rocker, and triple frame: Busch-Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 2115-212 + push-button 2020US + socket 20EUC-212 DURO2000 cream white glossy + EBROM voltage tester for installing the devices ET1 66012B
72,79 €
Flush-mounted dimmer switch suitable for a wide range of light sources, simple incandescent bulbs or LEDs from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (push-button with spring mechanism) - returns to its original position after actuation - rocker, socket and triple frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge phase With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer: REV RITTER, dimmer knob, socket, push-button, push-button rocker and 3-gang frame: Busch Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 2115-212 + push-button 2020US + socket with child protection 20EUCKS-212 DURO2000 cream white + EBROM phase tester for installing the devices ET1 66012B
86,22 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED bulbs, incandescent bulbs, high-voltage halogen bulbs, dimmable energy-saving bulbs, low-voltage halogen bulbs on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (push-button with spring mechanism) - remains in its original position after being pressed - rocker, socket with child protection, and triple frame - The system is in the Busch-Jäger design: DURO2000 cream-white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen bulbs on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly convert this REV dimmer so that it integrates perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, push-button, rocker, and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover plate 2115-212 and intermediate switch 2000/7 US in DURO2000 cream white glossy including EBROM phase tester for installation of the devices ET1 66012B
65,10 €
Flush-mounted dimmer suitable for a wide range of light sources, simple incandescent bulbs or LEDs, from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Can be used for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, intermediate switch (for intermediate circuit), rocker and double frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly convert this REV dimmer so that it fits visually perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, intermediate switch, intermediate switch rocker and double frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA FROM EBROM
REV Ritter LED rotary dimmer + Busch-Jäger dimmer cover 2115-212 and light switch 2000/6 US in DURO2000 cream white glossy including EBROM phase tester for mounting the devices ET1 66012B
62,30 €
Flush-mounted dimmer suitable for a wide variety of bulbs, from simple incandescent lamps to LEDs, starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, 5 to 100 watts for LEDs. Suitable for: dimmable LED lamps, incandescent lamps, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent lamps: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (two-way switch ON/OFF), rocker, and double frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED bulbs: 5-100 watts, incandescent lamps: 25-300W, LV halogen lamps on transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly retrofit this REV dimmer so that it integrates perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, switch, switch rocker, and double frame: Busch Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 2115-212 and light push-button 2020 US in DURO2000 cream white glossy, including EBROM voltage tester for installation of the devices ET1 66012B
61,26 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, light switch (push-button with spring mechanism) Returns to its original position after actuation - rocker and double frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and put together for you by the cable experts at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dial, push-button, push-button rocker and 2-gang frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
Our Videos
Learn more about our products and find out the most important information about cables
What does EBROM stand for?
Copper or aluminum?
Diameter vs. cross-section
HI-FLEX highly flexible
FLY Automotive Cables
Perfect pressings
Cable lugs DIN comparison
Free standard shipping to Germany from €60
Fast shipping within GermanyIn-house German assembly
Cable assemblies from our own productionSpecialist Consulting
Consultation by phone at +49 8074 9176911