Sockets, Switches & Accessories (1618)

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), whether operated on conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Additionally, it supports mixed-load operation with LEDi and conventional light sources. For individual adjustment, the dimmer offers manually selectable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit and overload-proof thanks to an electronic fuse. Technical specifications include a rated voltage of 230 V~ (+/- 10%), a rated frequency of 50/60 Hz, and a rated power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When using conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 2 x LED dimmer, 2 x dimmer knob, socket outlet with child protection, and triple frame - The system is in the Busch-Jaeger design: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion claw. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed-load operation, and is short-circuit and overload-proof. The rated voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and rated power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - includes glow lamp (the dimmer ring is illuminated when "OFF") Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer knobs, socket with child protection, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer features a shallow installation depth of less than 20 mm and does not require a spreading mechanism. It is equipped with a rotary control, a push-sequence changeover switch, and soft-click feedback. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), whether operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Furthermore, it supports mixed load operation with LEDi and conventional light sources. For individual adjustment, the dimmer offers manually selectable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit and overload-proof thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power rating of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When using conventional transformers, approximately 20% transformer loss should be taken into account, and approximately 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power output of 2 to 400 V·A. The dimmer is compliant with EU Directive RoHS 3 of July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer knob, intermediate switch (for intermediate switching), rocker, socket, and triple frame - The system is in the Busch-Jaeger design: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no spreader. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit and overload-proof. The nominal voltage is 230 V~ (+/- 10%) with a power rating of 2 - 100 W/VA (leading-edge) and a nominal power rating: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted either horizontally or vertically; the photo is for illustration of the horizontal installation Manufacturer of LED dimmer, dimmer knob, socket, intermediate switch, intermediate switch rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer features a low installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and soft-click detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), including those operated on conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For customized adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. Using MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included in the scope of delivery of the central plate. When using conventional transformers, transformer losses of approx. 20% should be taken into account; for electronic transformers, approx. 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 VA. The dimmer is compliant with the EU RoHS 3 Directive of July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer knob, light switch (two-way switch ON/OFF), rocker, socket, and triple frame - The system is in the Busch-Jaeger design: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and a nominal power of 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating horizontal mounting Manufacturer of LED dimmer, dimmer knob, socket, switch, switch rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features a rotary control, a push-to-make/break switch, and a soft-click detent. Thanks to its 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), including those operated on conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For customized adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control, as well as adjustable minimum and maximum brightness. By utilizing MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a rated voltage of 230 V~ (+/- 10%), a rated frequency of 50/60 Hz, and a rated power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the center plate. When used with conventional transformers, approximately 20% transformer losses should be accounted for; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive dated July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer knob, intermediate switch (for intermediate switching), rocker, and double frame - The system is in the Busch-Jaeger design: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The rated voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and rated power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including an EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of LED dimmer, dimmer knob, intermediate switch, intermediate switch rocker, and double frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer features a shallow installation depth of less than 20 mm and does not require an expansion mechanism. It is equipped with a rotary control, a push-to-toggle switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), including those operated on conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Furthermore, it supports mixed-load operation with LEDi and conventional lamps. For custom adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a rated voltage of 230 V~ (+/- 10%), a rated frequency of 50/60 Hz, and a rated power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and an output of 2 to 400 V·A. The dimmer complies with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient operating temperature ranges from 0 to +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer dial, light switch (two-way switch ON/OFF), rocker, and double frame - The system is in the design of Busch Jäger: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion claws. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The rated voltage is 230 V~ (+/- 10%) with a power rating of 2 - 100 W/VA (leading-edge) and rated power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of LED dimmer, dimmer dial, switch, switch rocker, and 2-gang frame: Busch Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its low installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-push switch, and soft-click detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), both those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed-load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a rated voltage of 230 V~ (+/- 10%), a rated frequency of 50/60 Hz, and a rated power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer dial, light button (push-button with spring mechanism) - remains in its original position after actuation - rocker and double frame - The system is in the Busch-Jaeger design: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and rated power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating horizontal mounting Manufacturer of LED dimmer, dimmer dial, button, button rocker, and double frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA FROM EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), whether operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed-load operation with LEDs and conventional light sources. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 VA. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer plate, socket, and double frame - The system is in the Busch-Jaeger design: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion claw. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed-load operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (the ring of the dimmer is illuminated when "OFF") Assembled ready for installation by the cable experts at EBROM, including an EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer plate, socket, and 2-gang frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer features a shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features a rotary control, a push-to-make switch, and soft-click detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), both those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included in the scope of delivery of the central plate. When used with conventional transformers, transformer losses of approximately 20% should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 VA. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer plate, intermediate switch (for intermediate circuit), rocker, socket with child protection, and triple frame - The system is in the design of Busch-Jaeger: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit proof as well as overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (ring of the dimmer is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer plate, socket, intermediate switch, intermediate switch rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer features a shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and soft-detent mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), both for those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates with low noise. It is short-circuit proof and overload-protected thanks to an electronic fuse. Technical specifications include a rated voltage of 230 V~ (+/- 10%), a rated frequency of 50/60 Hz, and a rated output of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and an output of 2 to 400 V·A. The dimmer complies with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer knob, light switch (two-way switch ON/OFF), rocker, socket with child protection, and triple frame - The system is in the Busch-Jaeger design: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit proof and overload-protected. The rated voltage is 230 V~ (+/- 10%) with an output of 2 - 100 W/VA (leading-edge) and rated output: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer knob, socket, switch, switch rocker, and triple frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), both those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional light sources. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included in the scope of delivery of the central plate. When using conventional transformers, about 20% transformer losses should be taken into account; for electronic transformers, about 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 degree of protection. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer dial, light button (push-button with spring mechanism) - remains in its original position after actuation -, rocker, socket with child protection, and triple frame - The system is in the design of Busch Jäger: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) and a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer LED dimmer, dimmer dial, socket, push-button, push-button rocker, and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion claw mechanism. It features a rotary control, a push-push switch, and soft-click detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), both those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Additionally, it supports mixed load operation with LEDi and conventional light sources. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness levels. Through the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with EU Directive RoHS 3 of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer knob, socket outlet with child protection, and double frame - The system is in the Busch-Jaeger design: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer knob, socket outlet with child protection, and 2-gang frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-push switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), both those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For individual customization, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control as well as adjustable minimum and maximum brightness. By using MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included in the scope of delivery of the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer plate, and single frame - Dimmer and plate in the design of Busch-Jaeger: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) and the power is 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (ring of the dimmer is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the device Manufacturer of LED dimmer, dimmer plate, and single frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Discover the Busch-Radio DAB+ / RDS radio, an innovative flush-mounted radio device that offers outstanding radio reception. The radio impresses with a high-resolution color display that shows you detailed additional information about your favorite stations. The integrated DAB+ and RDS stereo radio technology ensures crystal-clear sound and enables the reception of a wide range of radio stations. You can receive traditional FM stations in the frequency range from 87.50 MHz to 108.00 MHz as well as DAB+ stations in the frequency range from 174 MHz to 240 MHz. The device features a time and date display as well as individually adjustable alarm times. The snooze function allows for a gentle wake-up, while the automatic switch-off function (sleep timer) ensures that the radio is switched off automatically after a certain period. Screw fastening is effortless via practical keyholes. With an integrated antenna and an additional connection for an external antenna, the device offers optimal reception in every situation. Here is an overview of some technical specifications: - Application: DAB+ / RDS - Auxiliary voltage: 230 V AC/DC, 50-60 Hz - Power loss: 0.4 W - Operating mode: Push-button - Mounting type: Flush-mounted - Operating temperature: 5 ... +40 °C - Protection class: IP20 - RoHS-compliant according to EU directive 2015/863. With dimensions of 92 mm in width, 58 mm in height, and 78 mm in depth Crystal-clear sound and extended reception options: Enjoy outstanding sound quality with the Busch-Radio DAB+/RDS 8215U-101 thanks to DAB+ and RDS stereo radio technology. Receive a wide range of stations in the frequency range from 87.50 MHz to 240 MHz and experience radio in a new dimension. Included in the scope of delivery is an external EBROM wire antenna with a length of 0.9 meters for optimal reception (assuming a minimally sufficient signal at the installation site) Flexible alarm functions and practical automatic switch-off: The 8215U-101 enables individually adjustable alarm times and a gentle wake-up phase thanks to the snooze function. The automatic switch-off function (sleep timer) ensures that the radio is switched off automatically after a certain period. With its high-resolution color display, the radio not only offers clear menu navigation but also shows detailed additional information about your favorite stations. Stylish ambiance and modern design: The 8215U-101 is not only technologically impressive but also a stylish piece of furniture. This radio not only offers excellent radio reception and customizable sound but also blends seamlessly into your home with its contemporary design. Set a modern accent in your living spaces with this versatile device. Ready-to-install set put together for you by the cable professionals at EBROM This set consists of: Busch-Jäger DAB+ radio, radio cover, 1-gang frame and EBROM wire antenna, manufacturer RADIO, cover and frame: BUSCH-JÄGER // Manufacturer wire antenna: EBROM; A SET IDEA BY EBROM

Discover the Busch-Radio DAB+ / RDS radio, an innovative flush-mounted radio device that offers you outstanding radio reception. The radio impresses with a high-resolution color display that shows you detailed additional information about your favorite stations. The integrated DAB+ and RDS stereo radio technology ensures crystal-clear sound and enables the reception of a wide range of radio stations. You can receive traditional FM stations in the frequency range from 87.50 MHz to 108.00 MHz as well as DAB+ stations in the frequency range from 174 MHz to 240 MHz. The device features a time and date display as well as individually adjustable alarm times. The snooze function allows for a gentle wake-up, while the automatic switch-off function (sleep timer) ensures that the radio is switched off automatically after a certain time. The screw fastening is effortless thanks to practical keyholes. With an integrated antenna and an additional connection for an external antenna, the device offers optimal reception in any situation. Here is an overview of some technical data: - Application: DAB+ / RDS - Auxiliary voltage: 230 V AC/DC, 50-60 Hz - Power loss: 0.4 W - Operating mode: Push-button - Mounting type: Flush mounting - Operating temperature: 5 ... +40 °C - Protection class: IP20 - RoHS compliant according to EU Directive 2015/863. With dimensions of 92 mm in width, 58 mm in height, and 78 mm in depth Crystal-clear sound and expanded reception options: Enjoy outstanding sound quality with the Busch-Radio DAB+/RDS 8215U-101 thanks to DAB+ and RDS stereo radio technology. Receive a wide range of stations in the frequency range from 87.50 MHz to 240 MHz and experience radio in a new dimension. Included in the scope of delivery is an EBROM phase tester for effortless installation. Flexible alarm functions and practical automatic switch-off: The 8215U-101 enables individually adjustable alarm times and a gentle wake-up phase thanks to the snooze function. The automatic switch-off function (sleep timer) ensures that the radio is switched off automatically after a certain time. With its high-resolution color display, the radio not only offers clear menu navigation but also shows detailed additional information about your favorite stations. Stylish ambiance and modern design: The 8215U-101 is not only technologically impressive but also a stylish piece of interior decor. This radio not only offers excellent radio reception and customizable sound, but also blends seamlessly into your home with its contemporary design. Add a modern touch to your living spaces with this versatile device. Ready for installation, put together for you by the cable professionals at EBROM This set consists of: Busch Jäger DAB+ radio, radio cover, 1-gang frame, and EBROM phase tester, manufacturer RADIO, cover and frame: BUSCH JÄGER // manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Discover the Busch-Radio DAB+ / RDS radio – an innovative flush-mounted radio device with outstanding radio reception. The high-resolution color display shows detailed additional information about favorite stations. The DAB+ and RDS stereo radio technology offers crystal-clear sound and receives FM stations (87.50 MHz to 108.00 MHz) as well as DAB+ stations (174 MHz to 240 MHz). Simple screw mounting thanks to practical keyholes. Integrated and external antenna connections offer optimal reception. Technical specifications: Application: DAB+ / RDS - Auxiliary voltage: 230 V AC/DC, 50-60 Hz - Power loss: 0.4 W - Operating mode: push-button, mounting type: flush-mounted - Operating temperature: 5 ... +40 °C - Protection class: IP20 - RoHS-compliant according to EU directive 2015/863 - Dimensions: 92 mm (W) x 58 mm (H) x 78 mm (D). Technical specifications loudspeaker: Water-resistant 8 cm (3.3") broadband loudspeaker with molded plastic cone as well as plastic basket and grille. Absolutely corrosion and waterproof due to magnet encapsulation and silicone sheathing of the supply line. Clear high-frequency reproduction. *) IP65 protection class for the front when installed in a sealed housing. Technical specifications: Rated power handling 15 W - Music power handling 25 W - Nominal impedance 8 Ohm - Frequency response (-10 dB) 100–20000 Hz - Mean sound pressure level 84 dB (1 W/1 m) - Radiation angle (−6 dB) 114°/4000 Hz - Excursion limit +/−3 mm - Resonance frequency fs 158 Hz - Magnetic induction 1 T - Magnetic flux 190 µWB - Height of front pole plate 3 mm - Voice coil diameter 20 mm - Winding height 4 mm - Cutout diameter 74 mm - Color: WHITE Crystal-clear sound and extended reception options: Enjoy outstanding sound quality with the Busch-Radio DAB+/RDS 8215U-101 thanks to DAB+ and RDS stereo radio technology. Receive a wide range of stations in the frequency range from 87.50 MHz to 240 MHz and experience radio in a new dimension. Included in the delivery are 20 meters of loudspeaker cable NYFAZ 2x0.75 mm² transparent, incl. wire end ferrules and flat plug sleeves with protective sleeves for the cable strands. Flexible alarm functions and practical automatic switch-off: The 8215U-101 enables individually adjustable alarm times and a gentle wake-up phase thanks to the snooze function. The automatic switch-off function (sleep timer) ensures that the radio is switched off automatically after a certain time. With its high-resolution color display, the radio not only offers clear menu navigation but also shows detailed additional information about your favorite stations. Stylish ambiance and modern design: The 8215U-101 is not only technologically impressive but also a stylish furnishing item. This radio not only offers excellent radio reception and personalizable sound, but also blends seamlessly into your home with its contemporary design. Set a modern accent in your living spaces with this versatile device. Branded ceiling loudspeaker for wet rooms (bathroom) Protection class radio IP20, loudspeaker IP65 (IP protection class for the front when installed in a sealed housing) - 8 cm (3.3") ceiling loudspeaker in white. Rated power handling 15 W - Music power handling 25 W - Nominal impedance 8 Ohm - Sound pressure level 90 dB - Frequency response 100–20000 Hz - Mean sound pressure level 84 dB (1 W/1 m). This set consists of: Busch Jäger DAB+ radio, radio cover, 1-gang frame, wet room loudspeaker incl. 20 meters of loudspeaker cable with connection material (4 x wire end ferrules, 4 flat plug sleeves for plus and minus and 4 protective sleeves); A SET IDEA BY EBROM