Sockets, Switches & Accessories (1618)

EBROM LED DIMMER 1001, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Silent Technology, noiseless. Adjustable min. and max. range for flicker-free dimming, electronic overtemperature/short-circuit and overload protection with automatic reactivation. No stand-by consumption (true on/off switch) Consisting of: EBROM LED DIMMER TYPE 1001; Busch Jäger dimmer knob and single frame - Dimmer and knob in the design of Busch Jäger: Future Linear studio white glossy EBROM flush-mounted LED trailing-edge dimmer, rotary dimmer, including Busch Jäger components for the perfect visual complement to your existing Busch Jäger switch system. Can be mounted horizontally or vertically. For dimmable LED lamps (this dimmer covers a very wide range!) from 5 to 150 watts, as well as for incandescent, HV and LV halogen lamps with electronic transformer from 15 to 400 W Absolutely noiseless operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage - Adjustable minimum brightness as well as adjustable maximum brightness for optimal fine-tuning of the dimmer, electronic short-circuit, overtemperature and overload protection with automatic reactivation Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the device Manufacturer of dimmer knob and single frame: Busch Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER 1001, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and NV halogen lamps with electronic transformer. Silent Technology, noise-free. Adjustable min. and max. range for flicker-free dimming, electronic over-temperature/short-circuit and overload protection with automatic reactivation. No stand-by consumption (true on and off switch) Consisting of: EBROM LED DIMMER TYPE 1001; Busch Jäger dimmer dial and single frame - dimmer and dial in the design of Busch Jäger: Future Linear black matt EBROM flush-mounted LED trailing-edge dimmer, rotary dimmer, including Busch Jäger components for the perfect visual addition to your existing Busch Jäger switch system. Can be mounted horizontally or vertically. For dimmable LED lamps (this dimmer covers a very wide range!) from 5 to 150 watts, as well as for incandescent, HV and NV halogen lamps with electronic transformer from 15 to 400 W Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage - adjustable minimum brightness as well as adjustable maximum brightness for optimal fine-tuning of the dimmer, electronic short-circuit, over-temperature and overload protection with automatic reactivation Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the device Manufacturer of dimmer dial and single frame: Busch Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high- and low-voltage halogen lamps with electronic transformers. Freely selectable dimming method (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral conductor detection. 2- or 3-wire connection possible. Electronic short-circuit and overload protection, plus overtemperature protection with automatic reactivation. No standby power consumption thanks to a true on/off switch Consisting of: 2 x EBROM LED DIMMER TYPE 1002, 2 x Busch-Jaeger dimmer knobs, socket outlet and triple frame – the system is in the Busch-Jaeger design: Future Linear, glossy studio white EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 – trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5-watt LEDs in one lamp); also suitable for incandescent, high-voltage and low-voltage halogen lamps with electronic transformers from 10 to 400 W. Absolutely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm. Rated voltage: 230 V~, 50 Hz Important: Before purchasing, please check whether the light source and/or transformer is dimmable. We recommend light sources from well-known manufacturers. Manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral conductor detection. 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Professionally assembled and ready to install by EBROM’s cable experts, including an EBROM voltage tester for installing the devices. This combination can be mounted both horizontally and vertically; the photo shows the horizontal installation Manufacturer of dimmer knobs, socket outlet and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA FROM EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high-voltage and low-voltage halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral conductor detection. 2- or 3-wire connection possible. Electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation. No standby power consumption thanks to a genuine on/off switch Consisting of: 2 x EBROM LED DIMMER TYPE 1002, 2 x Busch-Jaeger dimmer knobs, socket outlet and triple frame – The system features the Busch-Jaeger Future Linear design in matte black EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 – trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5-watt LEDs in one lamp), and also suitable for incandescent, high-voltage and low-voltage halogen lamps with electronic transformers from 10 to 400 W – Absolutely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, rated voltage 230 V~, 50 Hz Important: Please check before purchasing whether the lamps and/or transformer are dimmable. We recommend lamps from reputable manufacturers. Manually switchable, easy adjustment of minimum and maximum brightness to optimize flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable lamps available on the market Assembled and ready to install by EBROM’s cable experts, including an EBROM voltage tester for installing the devices – This combination can be mounted either horizontally or vertically; the photo shows the horizontal installation Manufacturer of dimmer knobs, socket outlet and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high- and low-voltage halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable, easy adjustment of minimum and maximum brightness for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection, electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation. No standby power consumption thanks to a true on/off switch Includes: 2 x EBROM LED DIMMER TYPE 1002, 2 x Busch-Jaeger dimmer knobs, socket with child protection and triple frame - The system is in the Busch-Jaeger design: Future Linear, glossy studio white EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also multiple 3.5-watt LEDs in one lamp), and also suitable for incandescent, high- and low-voltage halogen lamps with electronic transformers from 10 to 400 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, rated voltage 230 V~, 50 Hz Important: Please check before purchasing whether the lamps and/or transformer are dimmable. We recommend lamps from well-known manufacturers. Manually switchable, easy adjustment of minimum and maximum brightness for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection. Extremely high compatibility with over 99% of dimmable lamps available on the market Assembled and ready to install for you by the cable experts at EBROM, including an EBROM voltage tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo shows the horizontal installation Manufacturer of dimmer knobs, socket with child protection and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA FROM EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable, easy adjustment of min. and max. brightness to optimize flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation, no standby power consumption thanks to a genuine on/off switch Consisting of: 2 EBROM LED DIMMER TYPE 1002 units, 2 Busch-Jaeger dimmer knobs, crossover switch (for crossover switching), rocker switch and triple frame - The system is in the Busch-Jaeger design: Future Linear studiowhite glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5-watt LEDs in one lamp), as well as for incandescent, HV and LV halogen lamps with electronic transformers from 10 to 400 W - Completely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, rated voltage 230 V~, 50 Hz Important: Please check before purchasing whether the light source and/or transformer is dimmable. We recommend light sources from reputable manufacturers. Manually switchable, easy adjustment of min. and max. brightness to optimize flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of dimmable light sources available on the market Professionally assembled and ready for installation by the cable experts at EBROM, including an EBROM voltage tester for installing the devices - This combination can be installed both horizontally and vertically; the photo shows the horizontal installation Manufacturer of dimmer knobs, crossover switch, crossover switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA FROM EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformers. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral detection, 2- or 3-wire connection possible. Electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation. No standby power consumption thanks to a true on/off switch Consisting of: 2 EBROM LED DIMMER TYPE 1002 units, 2 Busch-Jäger dimmer discs, light switch (two-way switch ON/OFF), rocker switch and triple frame – The system is in the Busch-Jäger Future Linear Studioweiß glossy design EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 – trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5-watt LEDs in one lamp), and also suitable for incandescent, HV and LV halogen lamps with electronic transformers from 10 to 400 W – Completely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage Important: Please check before purchasing whether the light sources and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, easy adjustment of minimum and maximum brightness to optimize flicker-free dimming, automatic neutral detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of dimmable light sources available on the market Professionally assembled and ready to install by EBROM’s cable experts, including an EBROM voltage tester for installing the devices – This combination can be mounted either horizontally or vertically; the photo shows horizontal installation Manufacturer of dimmer discs, switches, switch rocker and triple frame: Busch-Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high- and low-voltage halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable. Simple adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral conductor detection. 2- or 3-wire connection possible. Electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation. No standby power consumption thanks to a true on/off switch Includes: 2 EBROM LED DIMMER TYPE 1002 units, 2 Busch-Jaeger dimmer covers, light switch (push-button switch with spring mechanism) that returns to its original position after being pressed – rocker and triple frame. The system is in Busch-Jaeger Future Linear Studio White Gloss design EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 – trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also multiple 3.5-watt LEDs in one lamp), and also for incandescent, high- and low-voltage halogen lamps with electronic transformers from 10 to 400 W. Completely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, rated voltage 230 V~, 50 Hz Important: Before purchasing, please check whether the light sources and/or transformer are dimmable. We recommend light sources from reputable manufacturers. Manually switchable, simple adjustment of minimum and maximum brightness to optimize flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Professionally assembled and ready to install by EBROM’s cable experts, including an EBROM voltage tester for installing the devices. This combination can be installed horizontally or vertically; the photo shows the horizontal installation Manufacturers of dimmer covers, switch, switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high- and low-voltage halogen lamps with electronic transformers. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation. No standby power consumption thanks to a genuine on/off switch Consisting of: 2 x EBROM LED DIMMER TYPE 1002, 2 x Busch-Jaeger dimmer knobs, socket with child protection and triple frame – the system features the Busch-Jaeger Future Linear design in matte black EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 – trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also multiple 3.5-watt LEDs in one lamp); also suitable for incandescent, high-voltage and low-voltage halogen lamps with electronic transformers from 10 to 400 W. Absolutely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, rated voltage: 230 V~, 50 Hz Important: Please check before purchasing whether the light sources and/or transformer are dimmable. We recommend light sources from reputable manufacturers. Manually switchable, easy adjustment of minimum and maximum brightness to optimize flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Assembled and ready to install for you by the cable professionals at EBROM, including an EBROM voltage tester for installing the devices – this combination can be installed horizontally or vertically; the photo shows the horizontal installation Manufacturer of dimmer knobs, socket with child protection and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA FROM EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral conductor detection, 2- or 3-wire connection possible. Electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation. No standby power consumption thanks to a genuine on/off switch Consisting of: 2 EBROM LED DIMMER TYPE 1002 units, 2 Busch-Jaeger dimmer covers, crossover switch (for crossover wiring), rocker and triple frame - The system is in the Busch-Jaeger design: Future Linear matt black EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also multiple 3.5-watt LEDs in one lamp), and also for incandescent, HV and LV halogen lamps with electronic transformers from 10 to 400 W - Absolutely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, rated voltage 230 V~, 50 Hz Important: Please check before purchasing whether the light source and/or transformer is dimmable. We recommend light sources from well-known manufacturers. Manually switchable, easy adjustment of minimum and maximum brightness to optimize flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of dimmable light sources available on the market Ready for installation, assembled for you by the cable experts at EBROM, including an EBROM voltage tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo shows the horizontal installation Manufacturer of dimmer covers, crossover switch, crossover switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high- and low-voltage halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral detection, 2- or 3-wire connection possible. Electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation. No standby consumption thanks to a true on/off switch Includes: 2 EBROM LED DIMMER TYPE 1002 units, 2 x Busch-Jaeger dimmer knobs, light switch (two-way switch ON/OFF), rocker and triple frame - The system is in the Busch-Jaeger Future Linear design, matt black EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5-watt LEDs in one lamp), and also suitable for incandescent, high-voltage and low-voltage halogen lamps with electronic transformers from 10 to 400 W - Completely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, rated voltage: 230 V~, 50 Hz Important: Please check before purchase whether the light source and/or transformer is dimmable. We recommend light sources from reputable manufacturers. Manually switchable, easy adjustment of minimum and maximum brightness to optimize flicker-free dimming, automatic neutral detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of dimmable light sources available on the market Assembled and ready to install by EBROM's cable experts, including an EBROM voltage tester for installing the devices - This combination can be installed both horizontally and vertically; the photo shows the horizontal installation Manufacturer of dimmer knobs, switch, switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET CONCEPT BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral detection, 2- or 3-wire connection possible. Electronic short-circuit and overload protection, plus overtemperature protection with automatic reactivation. No standby power consumption thanks to a genuine on/off switch Set includes: 2 EBROM LED DIMMER TYPE 1002 units, 2 Busch-Jaeger dimmer covers, light switch (momentary switch with spring mechanism) Returns to its original position after being pressed – rocker and triple frame – The system features the Busch-Jaeger Future Linear design in matt black EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 – trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. several 3.5-watt LEDs in one lamp), and also suitable for incandescent, HV and LV halogen lamps with electronic transformers from 10 to 400 W – Completely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, rated voltage: 230 V~, 50 Hz Important: Please check before purchase whether the light source and/or transformer is dimmable. We recommend light sources from reputable manufacturers. Manually switchable; easy adjustment of minimum and maximum brightness to optimize flicker-free dimming; automatic neutral detection; 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Professionally assembled and ready to install by the cable specialists at EBROM, including an EBROM voltage tester for installing the devices – This combination can be installed horizontally or vertically; the photo shows the horizontal installation Manufacturers of dimmer covers, switch, switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable setting of the dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to a genuine on/off switch Consisting of: EBROM LED DIMMER TYPE 1002; Busch Jäger dimmer dial, light switch (two-way switch ON/OFF), rocker, socket with child protection and triple frame - The system is in the Busch Jäger design: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchasing whether the bulbs and/or transformer are dimmable. We recommend bulbs from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable bulbs available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of dimmer dial, socket, switch, switch rocker and triple frame: Busch Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1002; Busch-Jaeger dimmer cover plate, light switch (two-way switch ON/OFF), rocker, socket with child protection and triple frame - The system is in the design of Busch-Jaeger: Future Linear matte black EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchasing whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light sources available on the market Ready-to-install, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of dimmer cover plate, socket, switch, switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1002; Busch Jäger dimmer dial, intermediate switch (for intermediate circuit), rocker and double frame - The system is in the Busch Jäger design: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from reputable manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of demonstrating horizontal mounting Manufacturer of dimmer dial, intermediate switch, intermediate switch rocker and 2-gang frame: Busch Jäger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM