Sockets, Switches & Accessories (1618)

2 x Schuko socket 1 x 2-gang frame. Design: Busch Jäger PUR stainless steel Nominal voltage: 250 V Rated current: 16 A Mounting type: mounting with screws Surface material: metal Safety-relevant components: plastic Schuko Mounting type: flush-mounted Busch Jäger complete set consisting of: 2-gang frame - 2 pieces sockets Design: Busch Jäger PUR stainless steel

Flush-mounted dimmer suitable for a wide variety of light sources, from simple incandescent bulbs to LEDs, starting at 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white, with frame and cover. Full power range from 5 to 300 watts; for LEDs, 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmers, 2 x Busch-Jaeger dimmer dials, and a double frame - Dimmers and dials in Busch-Jaeger design: PUR stainless steel Flush-mounted dimmer for dimmable LED bulbs: 5–100 watts, incandescent bulbs: 25–300 W, LV halogen lamps with transformer: 20–300 VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jaeger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your home's Busch-Jaeger switch system. Prepared for installation by the cable experts at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dial and frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting from 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, 2 x intermediate switches (for intermediate switching), rocker, and triple frame - The system features the Busch-Jäger design: PUR stainless steel Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse protection: Miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Put together ready for installation by the cable experts at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dial, intermediate switch, intermediate switch rocker, and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET CONCEPT BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, standard incandescent bulbs or LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch Jäger dimmer dial, 2 x light switches (two-way switches ON/OFF), rocker and triple frame - The system features the Busch Jäger design: PUR stainless steel Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch Jäger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dial, switches, switch rocker and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET CONCEPT BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x light push-buttons (push-button with spring mechanism - remains in its original position after being pressed), rocker, and triple frame - The system is in the Busch-Jäger design: PUR stainless steel Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of demonstrating horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, push-button, rocker, and triple frame: Busch Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting at 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white, with frame and cover. Full power range from 5 to 300 watts; for LEDs, 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jaeger dimmer knob, 2 x socket, and triple frame - The system features the Busch-Jaeger design: PUR Stainless Steel Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jaeger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Ready-to-install set put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo shows the horizontal mounting Manufacturer of LED dimmer: REV RITTER, dimmer knob, sockets, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jaeger dimmer knob, 2 x socket with child protection and triple frame - The system features the Busch-Jaeger design: PUR stainless steel Flush-mounted dimmer for dimmable LED bulbs: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: micro-fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jaeger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Put together for you, ready for installation, by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, sockets with child protection and triple frame: Busch-Jaeger // Manufacturer voltage tester: EBROM; A SET CONCEPT BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: 3 pieces LED dimmer, 3 x dimmer cover plate, and triple frame - dimmer and plates in the design of Busch-Jaeger: PUR stainless steel LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - includes glow lamp (ring of the dimmer is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating horizontal mounting Manufacturer of LED dimmer, dimmer cover plate, and frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click detent. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), both those operated with conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed-load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. By using MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a rated voltage of 230 V~ (+/- 10%), a rated frequency of 50/60 Hz, and a rated power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, about 20% transformer losses should be considered, and about 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer complies with the EU RoHS 3 directive of July 22, 2019, and has an IP20 degree of protection. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 3 pieces LED dimmer, 3 x dimmer knob, and triple frame - dimmer and knobs in Busch-Jaeger design: PUR stainless steel The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The rated voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and rated power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer knob, and frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Blind switch insert 2000/4 US – for manual control of blinds & awnings This flush-mounted switch is ideal for the manual control of blind and awning motors. Thanks to the latching function, the rocker remains in the pressed position – for convenient operation without having to hold it down. Technical features: • Mounting type: Flush-mounted – suitable for standard flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and side release lever • Mounting: Claw or screw fastening • Degree of protection: IP20 – only suitable for dry indoor areas • Circuit type: 1-pole switch, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: Not suitable for automatic control systems. The operating force is approx. 2.5 – 3.5 N. ✔️ Convenient control with latching function: This blind switch remains in the pressed position – one press is enough, and the blind moves automatically to the end position ✔️ Clearly labeled rockers with Up/Down symbols: The included rockers are clearly marked and ensure intuitive operation – ideal for those who prefer classic switch logic. ✔️ Clean lines in pure stainless steel: Part of the Future Linear series – the modern, angular design in stainless steel gives rooms a particularly high-quality look and stands for durable quality and stylish technical aesthetics. ✔️ Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device - The mounting can be done horizontally or vertically ✔️ This set consists of: BUSCH JÄGER frame, blind switch, rocker, and EBROM phase tester - Manufacturer of frame, switch, and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Venetian blind push-button insert 2020/4 US – precise control with reset function This flush-mounted push-button is ideal for the precise, manual control of blinds and awnings. The rocker automatically returns to its initial position after being released – ideal for short-time operation or targeted intermediate stops. Technical features: • Mounting type: Flush-mounted – suitable for flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and lateral spring release • Fastening: Claws or screws • Degree of protection: IP20 – for dry interior areas • Switching type: 1-pole push-button, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: The blind moves only as long as the button is held down. The operating force is approx. 7.0 – 9.0 N – ideal for precise manual control.

Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting at 5 watts, no interference, flickering, or similar artifacts. Trailing-edge phase dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 3 x REV Ritter LED dimmers, 3 x Busch-Jäger dimmer knobs and a triple frame - dimmer and knobs in Busch-Jäger design: PUR stainless steel Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, low-voltage halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge phase With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - this combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob and frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Heating emergency off switch (2-pole) with frame and rocker with red lens Consisting of: 1-gang frame alpine white with "Heizung" (Heating) labeling in grey - 2000/2 UK rocker switch insert (2-pole) - Rocker with red lens EMERGENCY OFF switch for heating (10A 10AX) Busch-Jaeger rocker switch: 2000/2 UK with illumination 2-pole (not permanent, only when ON or OFF) Color: Busch-Jaeger Reflex SI alpine white glossy Included in the delivery is an EBROM voltage tester/phase tester for installing the switch.

Heating emergency off switch

The DB 53 is a 3-hole wall outlet for satellite reception systems for the separate connection of radio, TV receivers, and additional SAT receivers. A DC bypass is integrated into the SAT connection, which allows the required switching voltages to be passed through. The housing offers very high stability and ensures high shielding properties (Class A). Thanks to its flat design, it is space-saving, and a secure connection is guaranteed by the IEC socket/plug and F-socket. -------------------- UAE socket insert, RJ45, Cat. 6A, shielded, 2 sockets, 8/8-pin. With angled outlet and LSA insulation displacement connectors. RJ-45 connections for networks according to Cat. 6A, Class EA (10 Gbit/s / 500 MHz). Connection labeling A and B according to TIA/EIA-568-B.2. Design according to EN 60 603-7-51:2011-01. Shielding according to DIN EN 55022, Class B. Up to 500 MHz on all wire pairs. Suitable for 10-Gigabit Ethernet. Suitable for PoE+ according to IEEE 802.3at, ≥ 1,000 mating cycles. Flexible cable routing without kinks from all sides. Housing grounding possible via 6.3 mm flat plug connector on the back. Suitable for mix-and-match use. Suitable for RJ 11, RJ 12, and RJ 45 plugs. For data cables with a diameter of 6-10 mm. For wires of AWG 24-22. - Technical data voltage tester: Made in Germany - VDE / GS tested with 3 mm blade, hardened and bright nickel-plated, dimensions: 140 mm, voltage range: 120 to 250 volts - A product from EBROM