All products
All cables
Analog and digital room thermostats
Automotive cables
Battery cable
Bell and lighting concepts
Blind switch
Cable by the metre
Campervan
Control cables
Data cable
Flexible cables
Flush-mounted radio
HI-FLEX battery cable
House
Installation cable
Light switches & dimmers
Network sockets
Other
Photovoltaics
Power cables
Rubber cable
Sauna
Silicone cables
Single-core wires
Sockets, Switches & Accessories
Solar cable
Special cable
TV SAT Radio Outlet Systems
Underground cable
Wall sockets
Welding cable
Workshop
EBROM SET IDEA: BUSCH JÄGER blind switch roller shutter switch 2020/4 US (2020/4US) Reflex Si alpine white glossy complete set with arrow up/down print + EBROM phase tester for installation
41,59 €
Venetian blind push-button insert 2020/4 US – precise control with reset function This flush-mounted push-button is ideal for the precise, manual control of blinds and awnings. The rocker automatically returns to the starting position after being released – ideal for short-term operation or targeted intermediate stops. Technical features: • Mounting type: Flush-mounted – suitable for flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and lateral spring release • Mounting: Expansion claws or screws • Degree of protection: IP20 – for dry indoor areas • Circuit type: 1-pole push-button, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: The blind only moves as long as the button is held down. The actuation force is approx. 7.0 – 9.0 N – ideal for precise manual control. ✔️ Control with momentary function (without latching): With this blind switch, the button returns to the starting position after being pressed. The blind only moves as long as the button is held down – ideal for precise manual control. ✔️ Ideal for living spaces with short travel distances: Perfect if you do not want to fully open/close your blinds, but want to stop them at specific points and fine-tune them. ✔️ Subtle design in alpine white: Part of the Reflex SI series – the classic and timeless design with elegant rounded shapes blends harmoniously into any living environment and emphasizes a clean, high-quality look. ✔️ Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the device "Made in Germany" ✔️ This set consists of: BUSCH JÄGER frame, blind push-button, rocker and EBROM voltage tester - Manufacturer of frame, push-button and rocker: BUSCH JÄGER // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
EBROM BJ Set Busch-Jaeger Flush-Mounted Bluetooth DAB+ Radio 8217U-101 Reflex SI Alpine White Complete Set with Speaker, 0.9 m EBROM Wire Antenna for Reception Optimization
247,42 €
DAB+ and RDS stereo radio alarm clock for flush-mounted installation. With high-resolution color display for displaying additional information. With Bluetooth interface for music playback from mobile devices. Connection of external Bluetooth speakers possible. Reception frequency: 87.50 MHz - 108.00 MHz. Reception frequency (DAB+): 174 MHz - 240 MHz. With external AUX input/output, switchable. 8 radio stations can be saved. With time and date display. With individual alarm and snooze function. With automatic switch-off function (sleep timer). With extension input for remote ON/OFF switching. With integrated antenna. With additional connection for external antenna. Permissible speaker impedance: 4 - 8 ohms. Bluetooth specification: 4.2. Supported Bluetooth profiles: A2DP. Number of stored Bluetooth connections: max. 8. Controls: 4-button operation via floating rocker. Display elements: IPS graphic display with 280 DPI. Nominal voltage: 230 V~, +10 % / -10 %, nominal frequency: 50 Hz / 60 Hz. Power loss: 0.4 W. Nominal power: 2 W (RMS). Degree of protection of the device: IP 20. Device temperature range: 5 °C - 40 °C, storage temperature range: -20 °C - 70 °C. Dimensions (H x W x D): 71 mm x 71 mm x 47 mm. Installation depth: 32 mm. No spreader claws. Screw mounting via keyholes -- incl. 0.9 meter EBROM wire antenna for reception optimization
EBROM BJ Sets Busch-Jaeger Flush-Mounted Bluetooth DAB+ Radio 8217U-101 Reflex SI Alpine White Complete Set with Loudspeaker and 0.9 m EBROM Dipole Antenna for Reception Optimization
248,46 €
EBROM BJ Sets Busch-Jaeger Flush-Mounted Bluetooth DAB+ Radio 8217U-101 Reflex SI Alpine White Complete Set with Loudspeaker and 0.9 m EBROM Dipole Antenna for Reception Optimization
EBROM's BJ Set Ebrom Busch-Jaeger flush-mounted complete roller shutter switch set 2000/4US and single frame incl. cover with up/down arrow imprint – Reflex SI alpine white
40,25 €
Flush-mounted inserts, blind control units, blind switches, blind switch insert 1-pole, switch with interlocking mechanism. Rated current: 10 AX IEC60669-1, British Standard EN 60669-1
EBROM's BJ Set Ebrom Busch-Jaeger flush-mounted complete roller shutter switch set 2000/4US and single frame incl. cover with up/down arrow imprint – Reflex SI alpine white
40,45 €
EBROM's BJ Set Ebrom Busch-Jaeger flush-mounted complete roller shutter switch set 2000/4US and single frame incl. cover with arrow up/down imprint – Reflex SI alpine white
EBROM® Complete Set Universal LED Dimmer/Rotary Dimmer + Busch-Jaeger Reflex SI alpine white combination with rocker switch (2512-214 2115-214 2000/6 US) Trailing-edge & Leading-edge phase LED 3-150 Watt and others
121,83 €
EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Fits the frames and dimmer dials of switch manufacturers Busch-Jaeger, Gira, Berker, Jung, and many others. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable. Simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming. Automatic neutral wire detection, 2- or 3-wire connection possible. Electronic short-circuit, overload, and overheating protection with automatic reactivation. No standby consumption thanks to a true on/off switch - 5-year manufacturer warranty. Made in Germany. 100% satisfaction guarantee - You receive a 5-year warranty from EBROM on the product. During this time, you can report a defective product to us, and provided there is a defect, we will exchange the faulty product for a flawless one. The warranty period begins upon delivery of the product to the customer. The guarantor is EBROM Thomas Schmolinski & Sven Wiechers GbR, Forststr. 4a, 83123 Amerang. This warranty is only valid for customers based in the European Union. In addition, you have rights regarding statutory liability for defects as a consumer; these rights can be exercised against us without restriction and independently of our warranty.
Complete set BUSCH-JAEGER, iNet Radio, loudspeaker -white- -Reflex SI-
286,52 €
Complete set BUSCH-JAEGER, iNet radio, loudspeaker -white- -Reflex SI-
Complete set BUSCH-JÄGER, LED rotary dimmer -alpine white- -Reflex SI- new model 6523 U-102 - successor to 6523U
93,59 €
Complete set BUSCH-JÄGER, LED rotary dimmer -alpine white- -Reflex SI- new model 6523 U-102 - successor to 6523U
BUSCH JAEGER LED Dimmer Set, LED Rotary Dimmer -alpine white- REFLEX SI, 6523-U 102 (6523 U-102) + Socket with integrated increased contact protection (child safety) + EBROM phase tester for device installation
114,30 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-button changeover switch, and soft-click mechanism. 2-wire connection (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise operation due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. With central cover plate. With double frame, with 20EUCKS socket with child protection, Nominal voltage: 230 V~, + 10 % / - 10 % - Technical data phase tester: Made in Germany - VDE / GS tested with 3 mm blade, hardened and bright nickel-plated, dimensions: 140 mm, voltage range: 120 to 250 volts - A product by EBROM
REV Ritter (2x) LED rotary dimmer + Busch-Jaeger dimmer covers 2115-214 and intermediate switch 2000/7 US in alpine white glossy, including EBROM phase tester for installing the devices ET1 66012B
128,96 €
Flush-mounted dimmer switch suitable for a wide range of light sources, simple incandescent bulbs or LEDs from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary setting, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmers, 2 x Busch-Jäger dimmer knobs, intermediate switch (for intermediate circuit), rocker and triple frame - The system is in the Busch-Jäger design: Reflex SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse protection: Fine-wire fuse: F2AH/250V~ - Operating principle: Trailing-edge phase With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knobs, intermediate switch, intermediate switch rocker and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter (2 x) LED rotary dimmer + Busch-Jaeger dimmer covers 2115-214 and light switch 2000/6 US in Reflex SI alpine white glossy including EBROM phase tester for installing the devices ET1 66012B
123,76 €
Flush-mounted dimmer suitable for a wide variety of bulbs, from simple incandescent lamps to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Can be used for: dimmable LED lamps, incandescent lamps, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent lamps: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmers, 2 x Busch-Jaeger dimmer knobs, light switch (two-way/on-off switch), rocker, and triple frame - The system features the Busch-Jaeger design: Reflex SI alpine white glossy Flush-mounted dimmer for dimmable LED bulbs: 5-100 watts, incandescent lamps: 25-300W, low-voltage halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jaeger components included in the set, you can effortlessly convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo shows the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knobs, switches, switch rocker and 3-gang frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter (2 x) LED rotary dimmer + Busch-Jaeger dimmer covers 2115-214 and light switch 2020 US in Reflex Si alpine white glossy, including EBROM phase tester for installing the devices ET1 66012B
122,72 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmers, 2 x Busch-Jäger dimmer knobs, light switch (switch with spring mechanism) returns to its original position after actuation - rocker and triple frame - The system is in the Busch-Jäger design: Reflex SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV-halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it fits perfectly into the existing design of your Busch-Jäger switch system at home. Ready-to-install set assembled for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knobs, switch, switch rocker and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter (2 x) LED rotary dimmer + Busch-Jaeger dimmer covers 2115-214 and socket 20EUC-214 in Reflex SI alpine white glossy including EBROM phase tester for installation of the devices ET1 66012B
130,00 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs, from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmer, 2 x Busch-Jäger dimmer knob, socket, and triple frame - The system features the Busch-Jäger design: Reflex SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse protection: Miniature fuse: F2AH/250V~ - Operating principle: Trailing-edge With the Busch-Jäger components included in the set, you can effortlessly convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Put together for you, ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knobs, socket, and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter (2 x) LED rotary dimmer + Busch-Jaeger dimmer covers 2115-214 and socket with child protection 20EUCKS-214 in alpine white gloss + EBROM phase tester for mounting the devices
140,30 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmers, 2 x Busch-Jaeger dimmer dials, socket with child protection, and triple frame - The system features the Busch-Jaeger design: Reflex SI alpine white glossy Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: Trailing-edge With the Busch-Jaeger components included in the set, you can effortlessly retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating the horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dials, socket with child protection, and triple frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
Our Videos
Learn more about our products and find out the most important information about cables
What does EBROM stand for?
Copper or aluminum?
Diameter vs. cross-section
HI-FLEX highly flexible
FLY Automotive Cables
Perfect pressings
Cable lugs DIN comparison
Free standard shipping to Germany from €60
Fast shipping within GermanyIn-house German assembly
Cable assemblies from our own productionSpecialist Consulting
Consultation by phone at +49 8074 9176911