Sockets, Switches & Accessories (1618)

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, easy adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer knob, 2 x intermediate switches (for intermediate switching), rocker and triple frame - The system is in the design of Busch-Jaeger: Reflex SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g., also several 3.5-watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchasing whether the lamps and/or transformer are dimmable. We recommend lamps from reputable manufacturers. Manually switchable, easy adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable lamps available on the market Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of dimmer knob, intermediate switch, intermediate switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no standby consumption due to a real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer knob, 2 x light switches (two-way switch ON/OFF), rocker and triple frame - The system is in the Busch-Jaeger design: Reflex SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g., also several 3.5-watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether bulbs and/or transformers are dimmable. We recommend bulbs from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable bulbs available on the market Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM voltage tester for installing the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of dimmer knob, switch, rocker switch and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection, and overheating protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch Jäger dimmer dial, 2 x light push-buttons (push-button with spring mechanism - remains in its original position after actuation), rocker and triple frame - The system is in the Busch Jäger design: Reflex SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g., also several 3.5-watt LEDs in one lamp) as well as for incandescent, HV, and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from reputable manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Pre-assembled and ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of dimmer dial, push-button, push-button rocker, and triple frame: Busch Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable setting of the dimming principle (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch Jäger dimmer knob, 2 x socket and triple frame - The system is in the design of Busch Jäger: Reflex SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage Important: please check before purchasing whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of dimmer knob, sockets and triple frame: Busch Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable setting of the dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of the min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer knob, 2 x socket with child protection and triple frame - The system is in the design of Busch-Jaeger: Reflex SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - Trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g., also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light sources available on the market Ready-to-install, assembled for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of dimmer knob, sockets with child protection and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

Venetian blind switch insert 2000/4 US – for manual control of blinds & awnings This flush-mounted switch is ideal for the manual control of blind and awning motors. Thanks to the latching function, the rocker remains in the pressed position – for convenient operation without the need to hold it down. Technical features: • Mounting type: Flush-mounted – suitable for standard flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and side spring release • Mounting: Spreader or screws • Degree of protection: IP20 – suitable for dry indoor areas only • Switching type: 1-pole switch, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: Not suitable for automatic control systems. The actuation force is approx. 2.5 – 3.5 N. ✔️ Convenient control with latching function: This blind switch remains in the pressed position – one press is enough, and the blind moves independently to the end position ✔️ Clearly labeled rockers with Up/Down symbols: The included rockers are clearly marked and ensure intuitive operation – ideal for anyone who prefers classic switch logic. ✔️ Subtle design in alpine white: Part of the Reflex SI series – the classic and timeless design with elegant round shapes blends harmoniously into any living environment and emphasizes a clean, high-quality look. ✔️ Ready-to-install set put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device - Installation can be done horizontally or vertically ✔️ This set consists of: BUSCH JÄGER frame, blind switch, rocker, and EBROM phase tester - Manufacturer of frame, switch, and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Venetian blind push-button insert 2020/4 US – precise control with reset function This flush-mounted push-button is ideal for the precise, manual control of blinds and awnings. The rocker automatically returns to the starting position upon release – ideal for short-term operation or targeted intermediate stops. Technical features: • Mounting type: Flush-mounted – suitable for flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and lateral spring release • Fastening: Claw or screw fastening • Degree of protection: IP20 – for dry indoor areas • Switching type: 1-pole push-button, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: The blind only moves as long as the button is held down. The operating force is approx. 7.0 – 9.0 N – ideal for precise manual control. ✔️ Control with push-button function (non-latching): With this blind switch, the button returns to the starting position after being pressed. The blind only moves as long as the button is held down – ideal for precise manual control. ✔️ Ideal for living spaces with short travel distances: Perfect if you do not want to open/close your blinds completely, but want to stop them at a specific point and fine-tune them. ✔️ Subtle design in alpine white: Part of the Reflex SI series – the classic and timeless design with elegant, rounded shapes blends harmoniously into any living environment and emphasizes a clear, high-quality look. ✔️ Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device – mounting can be done horizontally or vertically ✔️ This set consists of: BUSCH JÄGER frame, blind push-button, rocker, and EBROM phase tester - Manufacturer of frame, push-button, and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-button change-over switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. With central cover plate. With 2-gang frame, with 2000/6 US rocker switch, nominal voltage: 230 V~, + 10 % / - 10 %

Busch-Jaeger (Original) LED rotary dimmer Type 6523 U-102 Includes 2-gang frame - Includes rocker switch and rocker Completely assembled and ready for installation Alpine white - Reflex SI

Flush-mounted dimmer suitable for a wide range of light sources, standard incandescent bulbs or LEDs. Starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmer, 2 x Busch-Jäger dimmer knob and double frame - dimmer and knobs in the Busch-Jäger design: Reflex Si alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob and frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide variety of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch Jäger dimmer knob, 2 x intermediate switches (for intermediate switching), rocker and triple frame - The system is in the Busch Jäger design: Reflex SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch Jäger components included in the set, you can effortlessly convert this REV dimmer so that it blends perfectly into the existing design of your Busch Jäger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, intermediate switch, intermediate switch rocker and triple frame: Busch Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x light switches (two-way switches ON/OFF), rocker, and triple frame - The system is in the Busch-Jäger design: Reflex SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it fits perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, switch, switch rocker, and triple frame: Busch-Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting from 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white, complete with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x light push-buttons (push-buttons with spring mechanism that return to their original position after being pressed) - rocker and triple frame - The system features the Busch-Jäger design: Reflex SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse protection: Fine-wire fuse: F2AH/250V~ - Operating principle: Trailing-edge With the Busch-Jäger components included in this set, you can easily adapt this REV dimmer so that it blends perfectly with the existing design of your Busch-Jäger switch system at home. Assembled ready for installation by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo shows the horizontal mounting configuration Manufacturer of LED dimmer: REV RITTER, dimmer knob, push-button, push-button rocker, and triple frame: Busch Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white, includes frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Can be used for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x socket and triple frame - The system features the Busch-Jäger design: Reflex SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: micro-fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it fits perfectly into the existing design of your Busch-Jäger switch system at home. Put together for you, ready for installation, by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, sockets and 3-gang frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting from 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white, including frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x socket with child protection, and triple frame - The system features the Busch-Jäger design: Reflex SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Assembled ready for installation by the cable experts at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, sockets with child protection, and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM