Light switches & dimmers (939)

EBROM LED DIMMER 1001, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Compatible with frames and dimmer knobs from switch manufacturers such as Busch-Jaeger, Gira, Berker, Jung, and many more. Silent Technology, noiseless. Adjustable min. and max. range for flicker-free dimming, electronic overtemperature/short-circuit and overload protection with automatic reactivation. Zero stand-by consumption (true on/off switch). 5-year manufacturer warranty. Made in Germany. 100% satisfaction guarantee.

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, soft-click push-changeover switch and soft-locking. 2-wire connection technique (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer plate and single frame - Dimmer and plate in the design by Busch-Jaeger: Future Linear studio white glossy LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for mounting the device Manufacturer of LED dimmer, dimmer plate and single frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer and dimmer knob (simply install this dimmer with the central plate into existing 1, 2, 3, 4, or 5-gang frames in your home and use it as a replacement or extension for a standard light switch or similar; dimmer and knob in the design of Busch-Jaeger: Future Linear studio white glossy LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - including glow lamp (ring of the dimmer is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the device Manufacturer of LED dimmer and dimmer knob: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-button changeover switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, and single frame - dimmer and knob in the design by Busch-Jaeger: Future Linear studio white glossy LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the device Manufacturer LED dimmer, dimmer knob, and single frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer features a shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-to-make/push-to-break switch, and a soft-click detent. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), including those operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed-load operation with LEDi and conventional lamps. For customized adjustments, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a rated voltage of 230 V~ (+/- 10%), a rated frequency of 50/60 Hz, and a rated power of 2–100 W/VA (leading-edge) or 2–400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When using conventional transformers, approx. 20% transformer losses should be taken into account; for electronic transformers, approx. 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and an output of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive dated July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer dial, and single frame - Dimmer and dial in the Busch Jäger design: Future Linear studio white glossy The type 6523 UR-104 LED rotary dimmer has an installation depth of less than 20 mm and does not require expansion claws. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The rated voltage is 230 V~ (+/- 10%) with a power of 2–100 W/VA (leading-edge) and rated power: 2–400 W/VA (trailing-edge) Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the device Manufacturer of LED dimmer, dimmer dial, and single frame: Busch Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer

EBROM LED DIMMER 1001, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Silent Technology, noiseless. Adjustable min. and max. range for flicker-free dimming, electronic overtemperature/short-circuit and overload protection with automatic reactivation. No stand-by consumption (true on/off switch) Consisting of: EBROM LED DIMMER TYPE 1001; Busch Jäger dimmer knob and single frame - Dimmer and knob in the design of Busch Jäger: Future Linear studio white glossy EBROM flush-mounted LED trailing-edge dimmer, rotary dimmer, including Busch Jäger components for the perfect visual complement to your existing Busch Jäger switch system. Can be mounted horizontally or vertically. For dimmable LED lamps (this dimmer covers a very wide range!) from 5 to 150 watts, as well as for incandescent, HV and LV halogen lamps with electronic transformer from 15 to 400 W Absolutely noiseless operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage - Adjustable minimum brightness as well as adjustable maximum brightness for optimal fine-tuning of the dimmer, electronic short-circuit, overtemperature and overload protection with automatic reactivation Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the device Manufacturer of dimmer knob and single frame: Busch Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and overtemperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1002; Busch-Jaeger dimmer knob and single frame - dimmer and knob in the design of Busch-Jaeger: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light sources available on the market Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for installing the device Manufacturer of dimmer knob and single frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption thanks to a real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch Jäger dimmer knob and single frame - dimmer and knob in the design of Busch Jäger: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also multiple 3.5 watt LEDs in one lamp), also for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage Important: please check before purchasing whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the device Manufacturer of dimmer knob and single frame: Busch Jäger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER 1001, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Compatible with frames and dimmer knobs from switch manufacturers such as Busch Jäger, Gira, Berker, Jung, and many more. Silent Technology, noiseless. Adjustable min. and max. range for flicker-free dimming, electronic overtemperature/short-circuit and overload protection with automatic reactivation. Zero stand-by consumption (true on/off switch). 5-year manufacturer warranty. Made in Germany. 100% satisfaction guarantee.

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Fits the frames and dimmer dials of switch manufacturers such as Busch-Jäger, Gira, Berker, Jung, and many more. Freely selectable setting of the dimming principle (leading-edge or trailing-edge phase control), manually switchable, simple adjustment of the min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to a real on/off switch - 5-year manufacturer's warranty. Made in Germany. 100% satisfaction guarantee - You receive a 5-year warranty on the product from EBROM; during this time, you can report a defective product to us, and provided there is a defect, we will exchange the faulty product for a flawless one. The warranty period begins upon delivery of the product to the customer. The guarantor is EBROM Thomas Schmolinski & Sven Wiechers GbR, Forststr. 4a, 83123 Amerang. This warranty applies only to customers based in the European Union. In addition, you have rights regarding statutory liability for defects as a consumer; these rights can be asserted against us without restriction by and independently of our warranty.

Complete set BUSCH-JÄGER, LED rotary dimmer in Future Linear studio white - 184K new model 6523 U-102 - successor to 6523U

BUSCH-JÄGER complete set, LED rotary dimmer in Future Linear studio white - 184K new model 6523 U-102 - successor to 6523U

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-button change-over switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without center plate. Nominal voltage: 230 V~, + 10 % / - 10 %

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Can be used for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob and single frame - dimmer and knob in the design of Busch-Jäger: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the device Manufacturer LED dimmer: REV RITTER, dimmer knob and single frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM