Light switches & dimmers (939)

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high- and low-voltage halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral conductor detection. 2- or 3-wire connection possible. Electronic short-circuit and overload protection, plus overtemperature protection with automatic reset. No standby power consumption thanks to a true on/off switch Consisting of: 2 EBROM LED DIMMER TYPE 1002 units, 2 Busch-Jäger dimmer covers and a double frame – dimmer and covers in the Busch-Jäger design: Future Linear, glossy studio white EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 – trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5-watt LEDs in one lamp), and also suitable for incandescent, high-voltage and low-voltage halogen lamps with electronic transformers from 10 to 400 W – absolutely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, rated voltage: 230 V~, 50 Hz Important: Before purchasing, please check whether the lamp(s) and/or transformer are dimmable. We recommend lamps from well-known manufacturers. Manually switchable, easy adjustment of minimum and maximum brightness to optimize flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable lamps available on the market Professionally assembled and ready for installation by EBROM’s cable specialists, including an EBROM voltage tester for installing the devices – this combination can be mounted both horizontally and vertically; the photo shows the horizontal installation Manufacturer of dimmer cover and frame: Busch-Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET CONCEPT BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1002; Busch Jäger dimmer dial, intermediate switch (for intermediate circuit), rocker and double frame - The system is in the Busch Jäger design: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from reputable manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of demonstrating horizontal mounting Manufacturer of dimmer dial, intermediate switch, intermediate switch rocker and 2-gang frame: Busch Jäger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading edge or trailing edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1002; Busch-Jaeger dimmer cover plate, light switch (two-way ON/OFF switch), rocker, and double frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g., also several 3.5-watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from reputable manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo shows the horizontal mounting Manufacturer of dimmer cover plate, switch, switch rocker, and double frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to genuine on/off switch Consisting of: EBROM LED DIMMER TYPE 1002; Busch-Jaeger dimmer knob, light switch (push-button with spring mechanism) - stays in its original position after actuation - rocker and double frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g., also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable professionals at EBROM, includes EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of dimmer knob, switch, switch rocker and double frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness for optimizing flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection, and overheating protection with automatic reactivation, no standby consumption thanks to genuine on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer cover, intermediate switch (for intermediate switching), rocker and double frame - The system features the Busch-Jaeger design: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g., also multiple 3.5-watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage Important: please check before purchase whether your illuminants and/or transformer are dimmable. We recommend using illuminants from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness for optimizing flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable illuminants available on the market Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of dimmer cover, intermediate switch, intermediate switch rocker, and double frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and NV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer knob, light switch (two-way switch ON/OFF), rocker and double frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and NV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of dimmer knob, switch, switch rocker and double frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and overheating protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer dial, light button (push-button with spring mechanism) - remains in its original position after being pressed - rocker and double frame - the system is in the Busch-Jaeger design: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of dimmer dial, push-button, rocker and double frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting at 5 watts, no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs, from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmers, 2 x Busch-Jaeger dimmer knobs and double frame - dimmer and knobs in the Busch-Jaeger design: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jaeger components included in the set, you can effortlessly convert this REV dimmer so that it fits perfectly into the existing design of your Busch-Jaeger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob and frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer switch suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting at 5 watts, no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white, with frame and cover. Full power range from 5 to 300 watts; for LEDs, 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, intermediate switch (for intermediate switching), rocker, and double frame - The system features the Busch-Jäger design: Future Linear, studio white gloss Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, intermediate switch, intermediate switch rocker, and 2-gang frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, simple incandescent bulbs or LEDs from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch Jäger dimmer dial, light switch (two-way ON/OFF switch), rocker, and double frame - The system is in the Busch Jäger design: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch Jäger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer: REV RITTER, dimmer dial, switch, switch rocker, and 2-gang frame: Busch Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary setting, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (push-button with spring mechanism) - returns to its original position after actuation - rocker and double frame - The system features the Busch-Jäger design: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: Trailing-edge phase With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Put together ready for installation by the cable experts at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, push-button, rocker and 2-gang frame: Busch-Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-button changeover switch and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: 2 pieces LED dimmer, 2 x dimmer dial, intermediate switch (for intermediate circuit), rocker and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - includes glow lamp (ring of the dimmer is illuminated when "OFF") Assembled and ready for installation by the cable experts at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically, the photo shows the horizontal mounting Manufacturer of LED dimmer, dimmer dials, intermediate switch, intermediate switch rocker and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-button changeover switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed-load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: 2 pieces LED dimmer, 2 x dimmer dial, light push-button (push-button with spring mechanism - returns to its original position after actuation), rocker, and triple frame - The system is in the Busch-Jaeger design: Future Linear, studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating horizontal mounting Manufacturer of LED dimmer, dimmer dials, push-button, push-button rocker, and 3-gang frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-switch and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: 2 pieces LED dimmer, 2 x dimmer dial, light switch (two-way ON/OFF), rocker and triple frame - The system is in the Busch Jäger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer LED dimmer, dimmer dials, switch, switch rocker and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: 3 LED dimmers, 3 x dimmer knobs, and a triple frame - Dimmers and knobs in Busch-Jaeger design: Future Linear studio white glossy LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready-to-install set assembled for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer of LED dimmer, dimmer knob, and frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM