Light switches & dimmers (939)

EBROM LED DIMMER 1001, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Silent Technology, noiseless. Adjustable min. and max. range for flicker-free dimming, electronic over-temperature/short-circuit and overload protection with automatic reactivation. No stand-by consumption (genuine on/off switch) Consisting of: EBROM LED DIMMER TYPE 1001; Busch-Jaeger dimmer cover plate, 2 x light switches (two-way switch ON/OFF), rocker and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy EBROM flush-mounted LED trailing-edge dimmer, rotary dimmer, including Busch-Jaeger components for the perfect visual addition to your existing Busch-Jaeger switch system. Can be mounted horizontally or vertically. For dimmable LED lamps (this dimmer covers a very wide range!) from 5 to 150 watts as well as for incandescent, HV and LV halogen lamps with electronic transformer from 15 to 400 W Absolutely noiseless operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage - adjustable minimum brightness as well as adjustable maximum brightness for optimal fine-tuning of the dimmer, electronic short-circuit, over-temperature and overload protection with automatic reactivation Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices Manufacturer of dimmer cover plate, switch, switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER 1001, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Silent Technology, noiseless. Adjustable min. and max. range for flicker-free dimming, electronic over-temperature/short-circuit and overload protection with automatic reactivation. No stand-by consumption (true on and off switch) Consisting of: EBROM LED DIMMER TYPE 1001; Busch-Jaeger dimmer dial, 2 x light push-buttons (push-button with spring mechanism) - Remains in its original position after being pressed - Rocker and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy EBROM flush-mounted LED trailing-edge dimmer, rotary dimmer, including Busch-Jaeger components for the perfect visual addition to your existing Busch-Jaeger switch system. Can be mounted horizontally or vertically. For dimmable LED lamps (this dimmer covers a very wide range!) from 5 to 150 watts, as well as for incandescent, HV and LV halogen lamps with electronic transformer from 15 to 400 W Absolutely noiseless operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage - Adjustable minimum brightness as well as adjustable maximum brightness for optimal fine-tuning of the dimmer, electronic short-circuit, over-temperature and overload protection with automatic reactivation Assembled ready for installation by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices Manufacturer of dimmer dial, push-button, push-button rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable, easy adjustment of min. and max. brightness to optimize flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation, no standby power consumption thanks to a genuine on/off switch Consisting of: 2 EBROM LED DIMMER TYPE 1002 units, 2 Busch-Jaeger dimmer knobs, crossover switch (for crossover switching), rocker switch and triple frame - The system is in the Busch-Jaeger design: Future Linear studiowhite glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5-watt LEDs in one lamp), as well as for incandescent, HV and LV halogen lamps with electronic transformers from 10 to 400 W - Completely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, rated voltage 230 V~, 50 Hz Important: Please check before purchasing whether the light source and/or transformer is dimmable. We recommend light sources from reputable manufacturers. Manually switchable, easy adjustment of min. and max. brightness to optimize flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of dimmable light sources available on the market Professionally assembled and ready for installation by the cable experts at EBROM, including an EBROM voltage tester for installing the devices - This combination can be installed both horizontally and vertically; the photo shows the horizontal installation Manufacturer of dimmer knobs, crossover switch, crossover switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA FROM EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformers. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral detection, 2- or 3-wire connection possible. Electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation. No standby power consumption thanks to a true on/off switch Consisting of: 2 EBROM LED DIMMER TYPE 1002 units, 2 Busch-Jäger dimmer discs, light switch (two-way switch ON/OFF), rocker switch and triple frame – The system is in the Busch-Jäger Future Linear Studioweiß glossy design EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 – trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5-watt LEDs in one lamp), and also suitable for incandescent, HV and LV halogen lamps with electronic transformers from 10 to 400 W – Completely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage Important: Please check before purchasing whether the light sources and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, easy adjustment of minimum and maximum brightness to optimize flicker-free dimming, automatic neutral detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of dimmable light sources available on the market Professionally assembled and ready to install by EBROM’s cable experts, including an EBROM voltage tester for installing the devices – This combination can be mounted either horizontally or vertically; the photo shows horizontal installation Manufacturer of dimmer discs, switches, switch rocker and triple frame: Busch-Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high- and low-voltage halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable. Simple adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral conductor detection. 2- or 3-wire connection possible. Electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation. No standby power consumption thanks to a true on/off switch Includes: 2 EBROM LED DIMMER TYPE 1002 units, 2 Busch-Jaeger dimmer covers, light switch (push-button switch with spring mechanism) that returns to its original position after being pressed – rocker and triple frame. The system is in Busch-Jaeger Future Linear Studio White Gloss design EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 – trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also multiple 3.5-watt LEDs in one lamp), and also for incandescent, high- and low-voltage halogen lamps with electronic transformers from 10 to 400 W. Completely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, rated voltage 230 V~, 50 Hz Important: Before purchasing, please check whether the light sources and/or transformer are dimmable. We recommend light sources from reputable manufacturers. Manually switchable, simple adjustment of minimum and maximum brightness to optimize flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Professionally assembled and ready to install by EBROM’s cable experts, including an EBROM voltage tester for installing the devices. This combination can be installed horizontally or vertically; the photo shows the horizontal installation Manufacturers of dimmer covers, switch, switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, easy setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: 3 pieces EBROM LED DIMMER TYPE 1002, 3 x Busch-Jaeger dimmer knob and triple frame - dimmer and knobs in the design of Busch-Jaeger: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage Important: please check before purchasing whether bulbs and/or transformers are dimmable. We recommend bulbs from well-known manufacturers. Manually switchable, easy setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable bulbs available on the market Ready-to-install set put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo is for the purpose of demonstrating horizontal mounting Manufacturer of dimmer knob and frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable setting of the dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and overheating protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1002; Busch-Jaeger dimmer knob, 2 x intermediate switches (for intermediate switching), rocker and triple frame - The system is in the design of Busch-Jaeger: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light sources available on the market Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal mounting Manufacturer of dimmer knob, intermediate switch, intermediate switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading edge or trailing edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to a real on/off switch Consisting of: EBROM LED DIMMER TYPE 1002; Busch-Jaeger dimmer cover, 2 x light switches (two-way switch ON/OFF), rocker and triple frame - The system is in the design of Busch-Jaeger: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also multiple 3.5-watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage Important: please check before purchasing whether the lamps and/or transformers are dimmable. We recommend lamps from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable lamps available on the market Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of dimmer cover, switches, switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and overtemperature protection with automatic reactivation, no stand-by consumption due to a real on/off switch Consisting of: EBROM LED DIMMER TYPE 1002; Busch Jäger dimmer knob, 2 x light push-buttons (push-button with spring mechanism) - Remains in its original position after being pressed - rocker and triple frame - The system is in the Busch Jäger design: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g., also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage Important: please check before purchasing whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal mounting Manufacturer of dimmer knob, push-button, push-button rocker and triple frame: Busch Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to true on/off switch Consisting of: 2 pieces EBROM LED DIMMER TYPE 1003, 2 x Busch-Jaeger dimmer covers, cross switch (for cross switching), rocker and triple frame - The system is in the design of Busch-Jaeger: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchasing whether the lamps and/or transformer are dimmable. We recommend lamps from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable lamps available on the market Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of dimmer covers, cross switch, cross switch rocker and 3-gang frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and overheating protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: 2 x EBROM LED DIMMER TYPE 1003, 2 x Busch Jäger dimmer dial, light switch (two-way switch ON/OFF), rocker and triple frame - The system is in the design of Busch Jäger: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g., also several 3.5-watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of dimmer dials, switches, rocker switch and triple frame: Busch Jäger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading edge or trailing edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: 2 pieces EBROM LED DIMMER TYPE 1003, 2 x Busch Jäger dimmer knob, light button (push-button with spring mechanism) remains in its original position after being pressed - rocker and triple frame - The system is in the design of Busch Jäger: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing edge and leading edge dimmer. From 3 to 100 watts (e.g. also several 3.5 watt LEDs in one lamp) also for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating horizontal mounting Manufacturer of dimmer knobs, push-buttons, rocker switches and triple frames: Busch Jäger // Manufacturer of LED dimmers and voltage testers: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and overheating protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: 3 pieces EBROM LED DIMMER TYPE 1003, 3 x Busch Jäger dimmer dial and triple frame - dimmer and dials in the design of Busch Jäger: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of dimmer dial and frame: Busch Jäger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA FROM EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to a real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer cover plate, 2 x intermediate switches (for intermediate switching), rocker and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchasing whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM voltage tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of dimmer cover plate, intermediate switch, intermediate switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to true on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch Jäger dimmer knob, 2 x light switches (two-way switch ON/OFF), rocker and triple frame - The system is in the Busch Jäger design: Future Linear studio white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no buzzing or humming, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of dimmer knob, switch, switch rocker and triple frame: Busch Jäger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM