Light switches & dimmers (939)

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption thanks to a real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch Jäger dimmer knob, 2 x socket and triple frame - The system is in the design of Busch Jäger: DURO2000 cream white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light sources available on the market Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of dimmer knob, sockets and triple frame: Busch Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and overtemperature protection with automatic reactivation, no stand-by consumption due to a real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch Jäger dimmer dial, 2 x socket with child protection and triple frame - The system features the Busch Jäger design: DURO2000 cream white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - Trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g., also for several 3.5-watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchasing whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light sources available on the market Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of dimmer dial, sockets with child protection and triple frame: Busch Jäger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable setting of the dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of the min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer cover, light switch (two-way switch ON/OFF), rocker, socket with child protection and triple frame - The system is in the Busch-Jaeger design: DURO2000 cream white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of the min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of dimmer cover, socket, switch, switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, simple incandescent bulbs or LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmer, 2 x Busch-Jäger dimmer knob, socket and triple frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knobs, socket and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA FROM EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmer, 2 x Busch-Jaeger dimmer knob, socket with child protection, and triple frame - The system is in the Busch-Jaeger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, low-voltage halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jaeger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knobs, socket with child protection, and triple frame: Busch-Jaeger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs. Starts from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary control, white, with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Can be used for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jaeger dimmer knob, intermediate switch (for intermediate switching), rocker, socket, and triple frame - The system features the Busch-Jaeger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED bulbs: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge phase With the Busch-Jaeger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, intermediate switch, intermediate switch rocker, and 3-gang frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, intermediate switch (for intermediate switching), rocker, socket with child protection, and triple frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED bulbs: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly convert this REV dimmer so that it blends perfectly into the existing design of your home's Busch-Jäger switch system. Ready for installation and put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, intermediate switch, intermediate switch rocker, and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, simple incandescent bulbs or LEDs, from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, light switch (two-way ON/OFF switch), rocker, socket, and triple frame - The system features the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV-halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dial, socket, switch, switch rocker, and 3-gang frame: Busch-Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting from 5 watts, no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary adjustment, white, including frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, light switch (two-way switch ON/OFF), rocker, socket with child protection, and triple frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Assembled and ready for installation for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer: REV RITTER; dimmer dial, socket, switch, switch rocker, and triple frame: Busch-Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer switch suitable for a wide range of light sources, simple incandescent bulbs or LEDs from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (push-button with spring mechanism) - returns to its original position after actuation - rocker, socket and triple frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge phase With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer: REV RITTER, dimmer knob, socket, push-button, push-button rocker and 3-gang frame: Busch Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED bulbs, incandescent bulbs, high-voltage halogen bulbs, dimmable energy-saving bulbs, low-voltage halogen bulbs on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (push-button with spring mechanism) - remains in its original position after being pressed - rocker, socket with child protection, and triple frame - The system is in the Busch-Jäger design: DURO2000 cream-white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen bulbs on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly convert this REV dimmer so that it integrates perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, push-button, rocker, and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x socket and triple frame - The system features the Busch-Jäger design: DURO2000 glossy cream white Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily adapt this REV dimmer so that it blends perfectly into the visual design of your existing Busch-Jäger switch system at home. Ready for installation and put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, sockets and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, simple incandescent bulbs or LEDs from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, 2 x socket with child protection and triple frame - The system is in the Busch-Jäger design: DURO2000 cream white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer dial, sockets with child protection and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

The Gira System 3000 Universal LED Rotary Dimmer insert Comfort is a highly advanced lighting control device. It offers the ability to control a variety of lamp types such as LEDs, halogen, and incandescent lamps. With features such as automatic and manual dimming principle adjustment, a memory function that saves the last brightness setting, and a hotel card function that allows lighting control with a hotel card, it is particularly versatile. The device also provides protection against overheating and short circuits and can be operated with or without a neutral conductor connection. With a nominal voltage of 230 V. HV LED lamps (leading edge): 3 to 100 W - HV LED lamps (trailing edge): 3 to 400 W - Compact fluorescent lamp: 3 to 100 W - Incandescent lamps: 20 to 420 W - HV halogen: 20 to 420 W - Tronic transformers: 20 to 420 W - It is designed for ambient temperatures from -5 to +45 °C and has an IP20 protection rating. Consisting of: LED dimmer, dimmer knob, socket outlet with child protection, and double frame - The system is in the GIRA design: E2 pure white glossy LED rotary dimmer type: 245500 - Universal LED rotary dimmer insert Comfort Dimm mode adjustable - leading edge or trailing edge - HV LED lamps (leading edge): 3 to 100 W - HV LED lamps (trailing edge): 3 to 400 W - Compact fluorescent lamp: 3 to 100 W - Incandescent lamps: 20 to 420 W - HV halogen: 20 to 420 W - Tronic transformers: 20 to 420 W Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer knob, socket outlet with child protection, and double frame: GIRA // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

The Gira System 3000 Universal LED Rotary Dimmer Insert Komfort is a highly advanced lighting control device. It offers the ability to control a variety of lamp types, such as LEDs, halogen, and incandescent lamps. With features like automatic and manual setting of the dimming principle, a memory function that saves the last brightness setting, and a hotel card function that allows lighting control via a hotel card, it is particularly versatile. The device also provides protection against overheating and short circuits and can be operated with or without a neutral conductor connection. With a nominal voltage of 230 V. HV-LED lamps (leading edge): 3 to 100 W - HV-LED lamps (trailing edge): 3 to 400 W - Compact fluorescent lamp: 3 to 100 W - Incandescent lamps: 20 to 420 W - HV-halogen: 20 to 420 W - Tronic transformers: 20 to 420 W - It is designed for ambient temperatures of -5 to +45 °C and has an IP20 protection rating. Consisting of: LED dimmer, dimmer knob, socket, and double frame - The system is in the GIRA design: E2 pure white glossy LED rotary dimmer type: 245500 - Universal LED rotary dimmer insert Komfort Dimming mode adjustable - leading edge or trailing edge - HV-LED lamps (leading edge): 3 to 100 W - HV-LED lamps (trailing edge): 3 to 400 W - Compact fluorescent lamp: 3 to 100 W - Incandescent lamps: 20 to 420 W - HV-halogen: 20 to 420 W - Tronic transformers: 20 to 420 W Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of LED dimmer, dimmer knob, socket, and double frame: GIRA // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM