Sockets, Switches & Accessories (1618)

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable setting of the dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of the min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and overheating protection with automatic reactivation, no stand-by consumption due to a real on/off switch Consisting of: EBROM LED DIMMER TYPE 1002; Busch-Jaeger dimmer knob and single frame - dimmer and knob in the Busch-Jaeger design: Balance SI Alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL PRO 1002 - trailing-edge and leading-edge dimmer. From 3 to 150 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 400 W - absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchasing whether the lamps and/or transformer are dimmable. We recommend lamps from well-known manufacturers. Manually switchable, simple adjustment of the min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable lamps available on the market Put together ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the device Manufacturer of dimmer knob and single frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high- and low-voltage halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness for flicker-free dimming optimization. Automatic neutral detection, suitable for 2- or 3-wire connections. Electronic short-circuit and overload protection, plus overtemperature protection with automatic reactivation. No standby power consumption thanks to a true on/off switch Includes: 2 x EBROM LED DIMMER TYPE 1003, 2 x Busch-Jaeger dimmer knobs, socket outlet and triple frame – The system features the Busch-Jaeger Balance SI design in glossy alpine white EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 – trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also multiple 3.5-watt LEDs in one lamp); also suitable for incandescent, high-voltage and low-voltage halogen lamps with electronic transformers from 10 to 220 W – Completely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, rated voltage: 230 V~, 50 Hz Important: Please check before purchasing whether the light source and/or transformer is dimmable. We recommend light sources from reputable manufacturers. Manually switchable, easy adjustment of minimum and maximum brightness for flicker-free dimming optimization, automatic neutral detection, suitable for 2- or 3-wire connections. Extremely high compatibility with over 99% of dimmable light sources available on the market Professionally assembled and ready to install by EBROM’s cable experts, including an EBROM voltage tester for installing the devices – This combination can be mounted horizontally or vertically; the photo shows horizontal installation Manufacturer of dimmer knobs, socket outlet and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformers. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral wire detection. 2- or 3-wire connection possible. Electronic short-circuit and overload protection, plus overtemperature protection with automatic reactivation. No standby power consumption thanks to a genuine on/off switch Consists of: 2 EBROM LED DIMMER TYPE 1003 units, 2 x Busch-Jaeger dimmer knobs, intermediate switch (for two-way switching), rocker and triple frame — the system is in the Busch-Jaeger Balance SI design, alpine white gloss EBROM flush-mounted LED DIMMER UNIVERSAL ECO 1003 — trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also multiple 3.5-watt LEDs in one lamp), and also suitable for incandescent, HV and LV halogen lamps with electronic transformers from 10 to 220 W. Completely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, rated voltage: 230 V~, 50 Hz Important: Please check before purchase whether the bulbs and/or transformer are dimmable. We recommend bulbs from reputable manufacturers. Manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral wire detection. 2- or 3-wire connection possible. Extremely high compatibility with over 99% of dimmable bulbs available on the market Assembled ready for installation by EBROM’s cable experts, including an EBROM voltage tester for installing the devices — this combination can be mounted both horizontally and vertically; the photo shows the horizontal installation Manufacturer of dimmer knobs, intermediate switch, intermediate-switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA FROM EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high- and low-voltage halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral wire detection, 2- or 3-wire connection possible. Electronic short-circuit and overload protection and overtemperature protection with automatic reactivation. No standby power consumption thanks to a genuine on/off switch Consisting of: 2 EBROM LED DIMMER TYPE 1003 units, 2 Busch-Jäger dimmer knobs, light switch (two-way switch ON/OFF), rocker switch and triple frame - The system is in the Busch-Jäger design: Balance SI alpine white gloss EBROM flush-mounted LED DIMMER UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. several 3.5-watt LEDs in one lamp), also suitable for incandescent, high- and low-voltage halogen lamps with electronic transformers from 10 to 220 W - Absolutely silent operation, no hum or buzz. Dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage Important: Please check before purchase whether the lamps and/or transformer are dimmable. We recommend lamps from reputable manufacturers. Manually switchable, easy adjustment of minimum and maximum brightness to optimize flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable lamps available on the market Ready for installation, assembled for you by the cable experts at EBROM, including an EBROM voltage tester for installing the devices - This combination can be installed both horizontally and vertically; the photo shows the horizontal installation Manufacturer of dimmer knobs, switches, switch rocker and triple frame: Busch-Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET CONCEPT BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high- and low-voltage halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness for flicker-free dimming. Automatic neutral detection, 2- or 3-wire connection possible. Electronic short-circuit and overload protection, and over-temperature protection with automatic reactivation. No standby power consumption thanks to a true on/off switch Consists of: 2 EBROM LED DIMMER TYPE 1003 units, 2 x Busch-Jaeger dimmer plates, light switch (push-button with spring mechanism) that returns to its original position after being pressed – rocker and triple frame. The system features the Busch-Jaeger Balance SI design in glossy alpine white EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 – trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also several 3.5-watt LEDs in one lamp), and also suitable for incandescent, high- and low-voltage halogen lamps with electronic transformers from 10 to 220 W. Completely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, rated voltage: 230 V~, 50 Hz Important: Please check before purchasing whether the light sources and/or transformer are dimmable. We recommend light sources from reputable manufacturers. Manually switchable, easy adjustment of minimum and maximum brightness for flicker-free dimming, automatic neutral detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of dimmable light sources available on the market Assembled and ready to install by EBROM’s cable specialists, including an EBROM voltage tester for installing the devices. This combination can be mounted horizontally or vertically; the photo shows the horizontal installation Manufacturers of dimmer plates, push-button, push-button rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, high- and low-voltage halogen lamps with electronic transformers. Freely selectable dimming mode (leading-edge or trailing-edge), manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral conductor detection. Can be connected using 2 or 3 wires. Electronic short-circuit and overload protection, and overtemperature protection with automatic reactivation. No standby power consumption thanks to a genuine on/off switch Consists of: 2 x EBROM LED DIMMER TYPE 1003, 2 x Busch-Jäger dimmer knobs, socket with child protection and triple frame – The system is in the Busch-Jäger Balance SI design, glossy alpine white EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 – trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also several 3.5-watt LEDs in one lamp), and also suitable for incandescent, high-voltage and low-voltage halogen lamps with electronic transformers from 10 to 220 W – Completely silent operation, no humming or buzzing. Dimensions: 71 x 71 x 33 mm, rated voltage: 230 V~, 50 Hz Important: Before purchasing, please check whether the light source and/or transformer is dimmable. We recommend light sources from reputable manufacturers. Manually switchable. Easy adjustment of minimum and maximum brightness to optimize flicker-free dimming. Automatic neutral conductor detection. Can be connected using 2 or 3 wires. Extremely high compatibility with over 99% of dimmable light sources available on the market Professionally assembled and ready to install by EBROM’s cable experts, including an EBROM voltage tester for installing the devices – This combination can be installed both horizontally and vertically; the photo shows the horizontal installation Manufacturer of dimmer knobs, socket with child protection and triple frame: Busch-Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to true on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer cover, intermediate switch (for intermediate switching), rocker, socket and triple frame - The system is in the design of Busch-Jaeger: Balance SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether lamps and/or transformer are dimmable. We recommend lamps from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable lamps available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of dimmer cover, socket, intermediate switch, intermediate switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, easy setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and overtemperature protection with automatic reactivation, no standby consumption due to true on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch Jäger dimmer knob, intermediate switch (for intermediate circuit), rocker, socket with child protection and triple frame - The system is in the design of Busch Jäger: Balance SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the lamps and/or transformer are dimmable. We recommend lamps from well-known manufacturers. Manually switchable, easy setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable lamps available on the market Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of dimmer knob, socket, intermediate switch, intermediate switch rocker and triple frame: Busch Jäger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading edge or trailing edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer cover, light switch (two-way switch ON/OFF), rocker, socket and triple frame - The system is in the design of Busch-Jaeger: Balance SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - Trailing edge and leading edge dimmer. From 3 to 100 watts (e.g., also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light sources available on the market Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of dimmer cover, socket, switch, switch rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to true on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer cover, light button (push-button with spring mechanism) - remains in its original position after being pressed - rocker, socket and triple frame - The system is in the Busch-Jaeger design: Balance SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g., also multiple 3.5-watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from reputable manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of dimmer cover, socket, push-button, push-button rocker and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer cover, light button (push-button with spring mechanism) returns to its original position after actuation - rocker, socket with child protection and triple frame - The system is in the design of Busch-Jaeger: Balance SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether light bulbs and/or transformer are dimmable. We recommend light bulbs from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light bulbs available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for installing the devices - this combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of dimmer cover, socket, push-button, rocker switch and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption thanks to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer knob, intermediate switch (for intermediate circuit), rocker and double frame - The system is in the design of Busch-Jaeger: Balance SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple setting of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of dimmer knob, intermediate switch, intermediate switch rocker and 2-gang frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable setting of the dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch Jäger dimmer knob, light switch (two-way switch ON/OFF), rocker and double frame - The system is in the design of Busch Jäger: Balance SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g., also several 3.5 watt LEDs in one lamp) also for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility of over 99% of all dimmable light sources available on the market Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo is for illustration of the horizontal mounting Manufacturer of dimmer knob, switch, switch rocker and double frame: Busch Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable setting of the dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and overheating protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer knob, light button (push-button with spring mechanism) remains in its original position after being pressed - rocker and double frame - The system is in the design of Busch-Jaeger: Balance SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also several 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely noiseless operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal mounting Manufacturer of dimmer knob, push-button, push-button rocker and double frame: Busch-Jaeger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable setting of the dimming principle (leading-edge or trailing-edge), manually switchable, simple adjustment of the min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption due to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer knob, socket and double frame - The system is in the design of Busch-Jaeger: Balance SI alpine white glossy EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from reputable manufacturers. Manually switchable, simple adjustment of the min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral conductor detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of dimmer knob, socket and double frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM