All products
All cables
Analog and digital room thermostats
Automotive cables
Battery cable
Bell and lighting concepts
Blind switch
Cable by the metre
Campervan
Control cables
Data cable
Flexible cables
Flush-mounted radio
HI-FLEX battery cable
House
Installation cable
Light switches & dimmers
Network sockets
Other
Photovoltaics
Power cables
Rubber cable
Sauna
Silicone cables
Single-core wires
Sockets, Switches & Accessories
Solar cable
Special cable
TV SAT Radio Outlet Systems
Underground cable
Wall sockets
Welding cable
Workshop
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover plate 2115-914 + intermediate switch 2000/7US + socket 20EUC-914 Balance SI alpine white glossy + EBROM phase tester for device installation ET1 66012B
77,99 €
Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting from 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white, including frame and cover. Full power range from 5 to 300 watts; for LEDs, 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, intermediate switch (for intermediate switching), rocker, socket, and triple frame - The system features the Busch-Jäger design: Balance SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: Fine-wire fuse: F2AH/250V~ - Operating principle: Trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Assembled ready for installation by the cable experts at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of demonstrating horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, intermediate switch, intermediate switch rocker, and 3-gang frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover plate 2115-914 + intermediate switch 2000/7US + child-safe socket 20EUCKS-914 Balance SI alpine white + EBROM phase tester for device installation
86,22 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting at 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, intermediate switch (for intermediate switching), rocker, socket with child protection, and triple frame - The system is in the design of Busch-Jäger: Balance SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse protection: Miniature fuse: F2AH/250V~ - Operating principle: Trailing-edge With the Busch-Jäger components included in the set, you can effortlessly convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to demonstrate the horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, intermediate switch, intermediate switch rocker, and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jäger dimmer cover 2115-914 + light switch 2000/6US + socket 20EUC-914 Balance SI alpine white glossy + EBROM voltage tester for device installation ET1 66012B
74,78 €
Flush-mounted dimmer suitable for a wide range of light sources, simple incandescent bulbs or LEDs from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, light switch (two-way ON/OFF switch), rocker, socket and triple frame - The system is in the Busch-Jäger design: Balance SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse protection: Miniature fuse: F2AH/250V~ - Operating principle: Trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready-to-install set put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically, the photo is for the purpose of illustrating horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dial, socket, switch, switch rocker and triple frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover plate 2115-914 + light switch 2000/6US + socket with child protection 20EUCKS-914 Balance SI alpine white + EBROM phase tester for device installation
79,03 €
Flush-mounted dimmer switch suitable for a wide variety of lamps, from simple incandescent bulbs to LEDs, starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary setting, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jaeger dimmer knob, light switch (two-way switch ON/OFF), rocker, socket with child protection, and triple frame - The system is in the Busch-Jaeger design: Balance SI alpine white, glossy Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV-halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge phase With the Busch-Jaeger components included in the set, you can easily adapt this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, switch, rocker switch, and triple frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 2115-914 + push-button 2020US + socket 20EUC-914 Balance SI alpine white glossy + EBROM phase tester for mounting the devices ET1 66012B
72,79 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting from 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs, from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, light switch (push-button with spring mechanism - remains in its original position after activation), rocker, socket, and triple frame - The system features the Busch-Jäger design: Balance SI alpine white glossy Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Assembled ready for installation by the cable experts at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dial, socket, push-button, rocker, and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover plate 2115-914 + push-button 2020US + socket with child protection 20EUCKS-914 Balance SI alpine white + EBROM phase tester for mounting the devices ET1 66012B
81,02 €
Flush-mounted dimmer suitable for a wide variety of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary setting, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Can be used for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, light switch (push-button with spring mechanism) - remains in its original position after actuation - rocker, socket with child protection, and triple frame - The system is in the Busch-Jäger design: Balance SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge phase With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer dial, socket, push-button, rocker switch and 3-way frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 2115-914 and intermediate switch 2000/7 US in Balance SI alpine white glossy, including EBROM phase tester for installation of the units ET1 66012B
65,10 €
Flush-mounted dimmer suitable for a wide range of light sources, simple incandescent bulbs or LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, intermediate switch (for intermediate switching), rocker and double frame - The system is in the design of Busch-Jäger: Balance SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge phase With the Busch-Jäger components included in the set, you can effortlessly convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready-to-install set put together for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer dial, intermediate switch, intermediate switch rocker and double frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover plate 2115-914 and light switch 2000/6 US in Balance SI alpine white glossy, including EBROM voltage tester for mounting the devices ET1 66012B
62,30 €
Flush-mounted dimmer suitable for a wide variety of bulbs, from simple incandescent lamps to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary setting, white with frame and cover. Full power range from 5 to 300 watts, 5 to 100 watts for LEDs. Suitable for: dimmable LED lamps, incandescent lamps, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent lamps: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch Jäger dimmer dial, light switch (two-way ON/OFF switch), rocker, and double frame - The system is in the Busch Jäger design: Balance SI alpine white glossy Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent lamps: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge phase With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it fits perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted either horizontally or vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dial, switch, switch rocker, and double frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 2115-914 and light switch 2020 US in Balance SI alpine white glossy, including EBROM phase tester for installing the devices ET1 66012B
61,26 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (push-button with spring mechanism) - returns to its original position after actuation - rocker and double frame - The system features the Busch-Jäger design: Balance SI alpine white, glossy Flush-mounted dimmer for dimmable LED bulbs: 5-100 watts, incandescent bulbs: 25-300W, LV-halogen lamps with transformer: 20-300VA. Fuse: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it fits perfectly into the existing design of your Busch-Jäger switch system at home. Ready-to-install set put together for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, push-button, push-button rocker and double frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 2115-914 and socket 20EUC-914 in Balance SI alpine white glossy, including EBROM voltage tester for installing the units ET1 66012B
67,50 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, socket, and double frame - The system features the Busch-Jäger design: Balance SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer dial, socket and double frame: Busch Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED Rotary Dimmer + Busch-Jaeger Dimmer Cover Plate 2115-914 and Socket with Child Protection 20EUCKS-914 in Balance SI alpine white glossy incl. EBROM Phase Tester for installation of the devices ET1 66012B
72,70 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED bulbs, incandescent bulbs, high-voltage halogen bulbs, dimmable energy-saving bulbs, and low-voltage halogen bulbs with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, socket with child protection, and double frame - The system features the Busch-Jäger design: Balance SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV-halogen bulbs with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted either horizontally or vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer: REV RITTER, dimmer knob, socket with child protection and 2-gang frame: Busch Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer LED dimmer with Busch-Jaeger dimmer knob central plate 2115-914 single frame in Balance SI alpine white glossy, including EBROM voltage tester for mounting the dimmer ET1 66012B
46,70 €
Flush-mounted dimmer suitable for a wide range of light sources, standard incandescent bulbs or LEDs, from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch Jäger dimmer dial and single frame - dimmer and dial in the design of Busch Jäger: Balance SI Alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: Trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it fits perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the device Manufacturer LED dimmer: REV RITTER, dimmer dial and single frame: Busch Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM
BUSCH JÄGER complete set / 2-gang network socket - dual UAE connection socket Cat.6A UAE 0218/12-101 + 2-meter branded patch cable 6a + frame + cover Balance SI alpine white
46,70 €
UAE modular jack, RJ45, Cat. 6A, shielded, 2 ports, 8/8-pin. With angled outlet and LSA insulation displacement connectors. RJ-45 connections for networks according to Cat. 6A, Class EA (10 Gbit/s / 500 MHz). Connection labeling A and B according to TIA/EIA-568-B.2. Design according to EN 60 603-7-51:2011-01. Shielding according to DIN EN 55022, Class B. Up to 500 MHz on all wire pairs. Suitable for 10-Gigabit Ethernet. Suitable for PoE+ according to IEEE 802.3at, ≥ 1,000 mating cycles. Flexible cable entry without kinks from all sides. Housing grounding via 6.3 mm flat connector possible on the rear. Suitable for mix-and-match use. Suitable for RJ 11, RJ 12, and RJ 45 connectors. For data cables with a diameter of 6-10 mm. For wires of AWG 24-22. ------- RJ 45 patch cable CAT.6 S/FTP, LSZH halogen-free, cable jacket and boot in the same color, latch protection and length marking, service life (mating cycles) 750, operating temperature -15°C...60°C, color code ISO/IEC 11801. Cable construction Li-02YSCH, 4x2xAWG 27/7 PIMF. Inner conductor Cu-stranded wire 0.42 mm AWG 27 (7/0.14). Overall shielding tinned Cu-braid, outer jacket 5.7 mm. NEXT at 100 MHz 92 dB. NEXT at 250 MHz 88 dB. Max. insertion loss at 100 MHz 2.98 dB/10 m. Max. insertion loss at 250 MHz 4.53 dB/10 m. Version: MP8 FS 600 S-FTP. Color: gray.
BUSCH JAEGER complete set / 2-gang network socket - dual UAE connection socket Cat.6A UAE RJ45 ISO shielded + 1-gang frame + cover Balance SI alpine white glossy + EBROM phase tester for socket installation
40,55 €
BUSCH JAEGER complete set / 2-gang network socket - 2-way UAE connection socket Cat.6A UAE RJ45 ISO shielded + 1-gang frame + cover Balance SI alpine white glossy + EBROM phase tester for socket installation
BUSCH JAEGER Complete Set / 2-gang network socket - 2-way UAE socket Cat.6A UAE RJ45 ISO shielded + 1-gang frame + cover Balance SI alpine white glossy + EBROM voltage tester for socket installation
40,55 €
UAE socket insert, RJ45, Cat. 6A, shielded, 2 jacks, 8/8-pin. With angled outlet and LSA insulation displacement connectors. RJ-45 connections for networks according to Cat. 6A, Class EA (10 Gbit/s / 500 MHz). Connection labeling A and B according to TIA/EIA-568-B.2. Design according to EN 60 603-7-51:2011-01. Shielding according to DIN EN 55022, Class B. Up to 500 MHz on all wire pairs. Suitable for 10-Gigabit Ethernet. Suitable for PoE+ according to IEEE 802.3at, ≥ 1,000 mating cycles. Flexible cable entry without kinks from all sides. Housing grounding possible via 6.3 mm flat plug connector on the rear. Suitable for mix-and-match use. Suitable for RJ 11, RJ 12, and RJ 45 plugs. For data cables with a diameter of 6-10 mm. For AWG 24-22 wires. Technical data voltage tester: Made in Germany - VDE / GS tested with 3 mm hardened and bright nickel-plated blade, dimensions: 140 mm, voltage range: 120 to 250 Volts - A product by EBROM
Our Videos
Learn more about our products and find out the most important information about cables
What does EBROM stand for?
Copper or aluminum?
Diameter vs. cross-section
HI-FLEX highly flexible
FLY Automotive Cables
Perfect pressings
Cable lugs DIN comparison
Free standard shipping to Germany from €60
Fast shipping within GermanyIn-house German assembly
Cable assemblies from our own productionSpecialist Consulting
Consultation by phone at +49 8074 9176911