Sockets, Switches & Accessories (1618)

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white, with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x light push-buttons (push-buttons with spring mechanism) - remain in their original position after being pressed - rocker and triple frame - The system features the Busch-Jäger design: Balance SI alpine white glossy Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready-to-install set put together for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, push-button, push-button rocker and triple frame: Busch-Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting at 5 watts, no interference, flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch Jäger dimmer dial, 2 x socket and triple frame - The system is in the Busch Jäger design: Balance SI alpine white, glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Fuse protection: Miniature fuse: F2AH/250V~ - Operating principle: Trailing-edge With the Busch-Jäger components included in the set, you can effortlessly convert this REV dimmer so that it fits perfectly into the existing design of your Busch-Jäger switch system at home. Assembled and ready for installation for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer dial, sockets and 3-way frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent lamps, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent lamps: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x socket with child protection and triple frame - The system features the Busch-Jäger design: Balance SI alpine white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent lamps: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, sockets with child protection and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

The DB 53 is a 3-hole tap-off socket for satellite reception systems for the separate connection of radio, TV receivers, and additional SAT receivers. The SAT connection has an integrated DC bypass that allows the necessary switching voltages to be passed through. The housing offers very high stability and ensures high shielding properties (Class A). Thanks to its flat design, it is space-saving, and the IEC socket/plug and F-connector ensure a secure connection.

BUSCH JÄGER complete set/antenna socket insert radio/TV/SAT (**) WISI + triple frame and cover incl. 2 x socket outlets 20 EUC-914 Balance SI alpine white

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-switch and soft-click mechanism. 2-wire connection (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise operation due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: 3 pieces LED dimmer, 3 x dimmer knob and triple frame - dimmer and knobs in the design by Busch-Jaeger: Balance SI alpine white glossy LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - including glow lamp (ring of the dimmer is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer knob and frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features a rotary control, a push-changeover switch, and a soft-detent mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), including those operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed-load operation with LEDi and conventional light sources. For individual customization, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge dimming, as well as adjustable minimum and maximum brightness. By using MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, transformer losses of approximately 20% should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 3 pieces LED dimmer, 3 x dimmer knob and triple frame - Dimmer and plates in the design of Busch-Jaeger: Balance SI alpine white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - Leading-edge or trailing-edge dimming adjustable - Including glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer knob, and frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

DAB+ and RDS stereo radio alarm clock for flush-mounted installation. With high-resolution color display for displaying additional information. With Bluetooth interface for music playback from mobile devices. Connection of external Bluetooth speakers possible. Reception frequency: 87.50 MHz - 108.00 MHz. Reception frequency (DAB+): 174 MHz – 240 MHz. With external AUX input/output, switchable. 8 radio stations can be saved. With time and date display. With individual alarm and snooze function. With automatic switch-off function (sleep timer). With extension input for remote ON/OFF switching. With integrated antenna. With additional connection for an external antenna. Permissible speaker impedance: 4 - 8 ohms. Bluetooth specification: 4.2. Supported Bluetooth profiles: A2DP. Number of stored Bluetooth connections: max. 8. Operating elements: 4-button operation via floating rocker. Display elements: IPS graphic display with 280 DPI. Nominal voltage: 230 V~, +10 % / -10 %, nominal frequency: 50 Hz / 60 Hz. Power loss: 0.4 W. Nominal power: 2 W (RMS). Degree of protection of the device: IP 20. Device temperature range: 5 °C - 40 °C, storage temperature range: -20 °C - 70 °C. Dimensions (H x W x D): 71 mm x 71 mm x 47 mm. Installation depth: 32 mm. No spreader claws. Screw fastening via keyholes -- Technical data voltage tester: Made in Germany - VDE / GS tested with 3 mm blade hardened and bright nickel-plated, dimensions: 140 mm, voltage range: 120 to 250 volts - A product by EBROM

Busch-Jaeger DAB+ Flush-mounted Bluetooth Radio 8217U-101 Balance SI alpine white with 2 x speakers in a 3-gang frame + EBROM phase tester for installation of the devices

Busch-Jaeger DAB+ flush-mounted radio 8215U-101 complete set Balance SI alpine white 2 x loudspeakers in 3-gang frame + EBROM phase tester for installing the devices

Product consisting of: Busch-Jaeger Balance SI alpine white glossy: central plate + 2 x speaker covers + speaker inserts / DAB+ flush-mounted radio / 3-gang frame - DAB+ and RDS stereo clock radio for flush-mounted installation. With high-resolution color display for showing additional information. Reception frequency: 87.50 MHz - 108.00 MHz. Reception frequency (DAB+): 174 MHz – 240 MHz. With external AUX input/output, switchable. For mono/stereo operation. 8 radio stations can be saved. With time and date display. With individual alarm and snooze function. With automatic switch-off function (sleep timer). With extension input for remote ON/OFF switching. With integrated antenna. With additional connection for external antenna. Permissible speaker impedance: 4 - 8 ohms - Controls: 4-button operation via floating rocker - Display elements: IPS graphic display with 280 DPI. Nominal voltage: 230 V~, +10 % / -10 %, nominal frequency: 50 Hz / 60 Hz - Power loss: 0.4 W - Control/signal outputs: 2 speaker outputs, impedance 4 ohms - Nominal power: 2 W (RMS) - Protection class of device: IP 20 - Temperature range of device: 5 °C - 40 °C - Storage temperature range: -20 °C - 70 °C - Dimensions (H x W x D): 71 mm x 71 mm x 47 mm - Installation depth: 32 mm - No spreader claws. Screw mounting via keyholes -- Technical data voltage tester: Made in Germany - VDE / GS tested with 3 mm blade, hardened and bright nickel-plated, dimensions: 140 mm, voltage range: 120 to 250 volts - A product by EBROM

Optimize your media and power connections with the universal 2-hole through-outlet and the integrated Busch Jäger SCHUKO socket. The elegant Busch Jäger design blends seamlessly into any environment and ensures reliable connections. The through-outlet supports a wide frequency range from 5 to 2400 MHz and is suitable for cable (BK) and SAT single-cable solutions. Two IEC connectors and high decoupling ensure interference-free operation of your terminal devices. A high Class A shielding rating guarantees optimal signal quality. This flexible, space-saving set, manufactured in Germany, promises the highest quality and durability. Enhance your media experience and power supply with this powerful combination The 2-hole through-outlet offers you flexibility and security. It is ideal for various applications and supports efficient signal distribution. With its wide frequency range from 5 to 2400 MHz and 2 IEC connectors, it allows for high adaptability. In a 3-gang frame together with two elegant Busch Jäger SCHUKO sockets, this set provides not only optimal signal distribution but also a practical power supply option. The through-outlet is ideal for private use, e.g., in a single-family home with multiple televisions. Imagine having the connection in the living room and additionally wanting to receive the signal in the bedroom and children's room. With the through-outlet, you can loop the signal through from the living room and enjoy it on the other devices. Furthermore, the high tap loss ensures excellent signal quality at every device in the house. This set consists of: 3-gang frame, flush-mounted through-outlet with cover, 2 x socket, and EBROM phase tester Assembled ready for installation for you by the cable professionals at EBROM Through-outlet manufacturer: WISI // Socket, frame, and cover(s) manufacturer: BUSCH JÄGER // Phase tester manufacturer: EBROM; A SET IDEA BY EBROM

The WISI DB53 is a 3-hole terminal socket for satellite reception systems that offers separate connections for radio, TV, and satellite receivers. It features a DC bypass in the SAT port for switching voltages and stands out due to its high stability and Class A shielding properties. Thanks to its flat design, it is space-saving. Its frequency ranges extend from 47 to 2150 MHz, with specific ranges for TV, FM, and SAT. Both products are compact, unobtrusive, and easy to install. They are manufactured in Germany and promise the highest quality and longevity. Improve your network and media connections with this powerful combination of network socket and TV/SAT/radio socket. Optimize your satellite or cable TV reception with the premium 3-hole terminal socket, specially designed for separate connections for radio, TV, and additional satellite receivers. The built-in DC bypass in the SAT port ensures smooth transmission of switching voltages. Its robust construction and excellent shielding (Class A) promise interference-free use. The IEC socket, IEC plug, and F-connector provide additional security and durability. In a 3-gang frame with two elegant Busch-Jaeger SCHUKO sockets, this SET also offers a power supply option. Shielding effectiveness >85 dB (Class A) - operating range of 47-2150 MHz. It offers: TV frequency: 47-68/174-862 MHz (<2 dB attenuation). FM: 87.5-108 MHz (1.5 dB attenuation). SAT: 950-2150 MHz (<2 dB attenuation). High decoupling: TV-SAT ≥15 dB, typically up to 25 dB. Return loss: TV ≥14 dB, FM/SAT ≥10 dB. A powerful, versatile terminal socket for TV, radio, and satellite. This set consists of: 3-gang frame, terminal socket, 3-hole cover, 2 x socket, and EBROM phase tester. Assembled ready for installation for you by the cable professionals at EBROM. Manufacturer 3-hole socket: WISI // Manufacturer sockets, frame, and cover(s): BUSCH-JAEGER // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

The ASTRO GUT400 represents the latest generation of 4-hole terminal outlets, specially developed for receiving terrestrial, satellite, radio, and TV programs. With an impressive frequency range of 40 to 2400 MHz, it covers all common reception areas: 40-70 MHz, 87.5-108 MHz, 174-862 MHz, and 950-2150 MHz. Particularly noteworthy is the 500 mA DC bypass function via the F-connector, which ensures continuous and reliable transmission. In terms of tap loss, the outlet impresses with values of 1.5 ± 1 dB for TV, typ. 10 dB for SAT1, and 1 ± 0.5 dB for SAT2. Return losses are also optimized, with inputs reaching > 6 dB and SAT1/2 values of > 10 dB. Another highlight is the significant isolation between the input and SAT1/SAT2 of typ. 20 / typ. 25 dB. This promises minimal interference between the different connections, thereby guaranteeing first-class signal quality. The compact and intelligent design of the ASTRO GUT400 allows for simple screw and claw mounting and is optimally suited for installation in 55mm wall boxes. Made in Germany, it stands not only for technical perfection but also for quality and durability. So, if you are looking for a state-of-the-art, reliable, and powerful terminal outlet, the ASTRO GUT400 is the perfect choice. It not only takes your media connections to a new level but is also a symbol of German engineering and quality. Maximize your satellite and cable TV reception with the ASTRO GUT400, a premium 4-hole outlet for radio, TV, and SAT. Thanks to the DC bypass in the SAT connection, interference-free signal transmission is guaranteed. Excellent shielding and solid construction ensure reliability. The precise connections (IEC & F-connector) offer high security and durability. In a 3-gang frame with two Busch-Jaeger SCHUKO sockets, this SET provides an additional power supply. Frequency range 40-2400 MHz. TV 174-862 MHz, FM 87.5-108 MHz, SAT1 950-2150 MHz, SAT2 2150-2400 MHz. Isolation SAT1/SAT2: typ. 20/25 dB. Return loss: TV/FM > 6 dB, SAT > 6/10 dB. 500 mA DC bypass via F-connector. For 55mm wall boxes, screw/claw mounting. This set consists of: 3-gang frame, terminal/end outlet, 4-hole cover, 2 x socket, and EBROM voltage tester Ready for installation, assembled for you by the cable professionals at EBROM Manufacturer 4-hole outlet: ASTRO // Manufacturer sockets, frame, and cover(s): BUSCH-JAEGER // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER 1001, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Silent Technology, noiseless. Adjustable min. and max. range for flicker-free dimming, electronic overtemperature/short-circuit and overload protection with automatic reactivation. No stand-by consumption (true on/off switch) Consisting of: 3 pieces EBROM LED DIMMER TYPE 1001, 3 x Busch Jäger dimmer knob and triple frame - Dimmer and knobs in the design of Busch Jäger: BalanceSi alpine white glossy EBROM flush-mounted LED trailing-edge dimmer, rotary dimmer, including Busch Jäger components for the perfect visual addition to your existing Busch Jäger switch system. Can be mounted horizontally or vertically. For dimmable LED lamps (this dimmer covers a very wide range!) from 5 to 150 watts, as well as for incandescent, HV and LV halogen lamps with electronic transformer from 15 to 400 W Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage - Adjustable minimum brightness as well as adjustable maximum brightness for optimal fine-tuning of the dimmer, electronic short-circuit, overtemperature and overload protection with automatic reactivation Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices Manufacturer of dimmer knob and frame: Busch Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM