All products
All cables
Analog and digital room thermostats
Automotive cables
Battery cable
Bell and lighting concepts
Blind switch
Cable by the metre
Campervan
Control cables
Data cable
Flexible cables
Flush-mounted radio
HI-FLEX battery cable
House
Installation cable
Light switches & dimmers
Network sockets
Other
Photovoltaics
Power cables
Rubber cable
Sauna
Silicone cables
Single-core wires
Sockets, Switches & Accessories
Solar cable
Special cable
TV SAT Radio Outlet Systems
Underground cable
Wall sockets
Welding cable
Workshop
REV Ritter LED Rotary Dimmer + Busch-Jaeger Dimmer Cover Plate 6540-84-102 + Socket with Child Protection 20EUCKS-84 in Future Linear Studio White Glossy + EBROM Phase Tester for installation of the devices ET1 66012B
92,35 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consists of: REV Ritter LED dimmer, Busch Jäger dimmer knob, socket with child protection, and double frame - The system is in the Busch Jäger design: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: Trailing-edge With the Busch Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch Jäger switch system at home. Ready-to-install set put together for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, socket with child protection and double frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 6540-84-102 + push-button 2020US + socket 20EUC-84 Future Linear studio white glossy + EBROM phase tester for installing the devices ET1 66012B
87,35 €
Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting from 5 watts, no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white, complete with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED bulbs, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (push-button with spring mechanism - returns to its original position after actuation), rocker, socket, and triple frame - The system is in the Busch-Jäger design: Future Linear, studio white, glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV-halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the visual design of your existing Busch-Jäger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, push-button, rocker, and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 6540-84-102 + push-button 2020US + socket with child protection 20EUCKS-84 Future Linear studio white + EBROM phase tester for installation of the devices
102,44 €
Flush-mounted dimmer suitable for a wide variety of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, 5 to 100 watts for LEDs. Can be used for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (push-button with spring mechanism) - returns to its original position after actuation - rocker, socket with child protection, and triple frame - The system is in the design of Busch-Jäger: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it fits perfectly into the existing design of your Busch-Jäger switch system at home. Pre-assembled and ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, push-button, rocker and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer knob 6540-84-102 and push-button switch 2020 US in Future Linear studio white glossy, including EBROM phase tester for installing the devices ET1 66012B
71,66 €
Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary setting, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (push-button with spring mechanism) - returns to its original position after actuation - rocker and double frame - The system features the Busch-Jäger design: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: Trailing-edge phase With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Put together ready for installation by the cable experts at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, push-button, rocker and 2-gang frame: Busch-Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover plate 6540-885-102 + intermediate switch 2000/7 US in Future Linear matte black including EBROM phase tester for mounting the devices ET1 66012B
86,22 €
Flush-mounted dimmer switch suitable for a wide variety of lamps, from simple incandescent bulbs to LEDs, starting from 5 watts, no interference, flickering, or similar artifacts. Trailing-edge phase dimmer with rotary setting, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent lamps, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent lamps: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, intermediate switch (for intermediate switching), rocker, and double frame - The system features the Busch-Jäger design: Future Linear matt black Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent lamps: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse protection: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge phase With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Put together ready for installation by the cable experts at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, intermediate switch, intermediate switch rocker, and double frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover plate 6540-885-102 + intermediate switch 2000/7US + socket 20EUC-885 Future Linear matte black + EBROM phase tester for device installation
102,95 €
Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs. Starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED bulbs, incandescent bulbs, high-voltage halogen bulbs, dimmable energy-saving bulbs, low-voltage halogen bulbs on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, intermediate switch (for intermediate circuit), rocker, socket and triple frame - The system features the Busch-Jäger design: Future Linear, matte black Flush-mounted dimmer for dimmable LED bulbs: 5-100 watts, incandescent bulbs: 25-300W, LV halogen bulbs on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and assembled for you by the cable experts at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, intermediate switch, intermediate switch rocker and triple frame: Busch Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 6540-885-102 + intermediate switch 2000/7US + socket with child protection 20EUCKS-885 Future Linear matt black + EBROM voltage tester for installation
118,46 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, intermediate switch (for intermediate switching), rocker, socket with child protection, and triple frame - The system is in the Busch-Jäger design: Future Linear matte black Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer of LED dimmer: REV RITTER, dimmer knob, socket, intermediate switch, intermediate switch rocker, and triple frame: Busch-Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED Rotary Dimmer + Busch-Jaeger Dimmer Cover Plate 6540-885-102 + Light Switch 2000/6 US in Future Linear matte black, including EBROM Phase Tester for installing the devices ET1 66012B
79,98 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting at 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs, from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (two-way ON/OFF switch), rocker, and double frame - The system features the Busch-Jäger design: Future Linear matte black Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, switch, rocker, and double frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 6540-885-102 + light switch 2000/6US + socket 20EUC-885 Future Linear matt black + EBROM voltage tester for installing the devices
98,70 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting from 5 watts, no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED bulbs, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving bulbs, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jaeger dimmer knob, light switch (two-way ON/OFF switch), rocker, socket, and triple frame - The system features the Busch-Jaeger design: Future Linear matte black Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jaeger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Ready-to-install set assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for demonstration purposes showing horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, switch, switch rocker, and triple frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 6540-885-102 + light switch 2000/6US + socket with child protection 20EUCKS-885 Future Linear matte black + EBROM voltage tester for installation
109,19 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED bulbs, incandescent bulbs, high-voltage halogen bulbs, dimmable energy-saving bulbs, low-voltage halogen bulbs with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (two-way switch ON/OFF), rocker, socket with child protection and triple frame - The system features the Busch-Jäger design: Future Linear matte black Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen bulbs with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly retrofit this REV dimmer so that it blends visually and perfectly into the existing design of your Busch-Jäger switch system at home. Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be installed both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, socket, switch, switch rocker and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 6540-885-102 + socket with child protection 20EUCKS-885 in Future Linear matte black + EBROM voltage tester for mounting the devices ET1 66012B
101,82 €
Flush-mounted dimmer suitable for a wide variety of lamps, simple incandescent bulbs or LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch Jäger dimmer knob, socket with child protection and double frame - The system features the Busch Jäger design: Future Linear matte black Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, socket with child protection and 2-gang frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover 6540-885-102 + push-button 2020US + socket 20EUC-885 Future Linear matte black + EBROM phase tester for installing the devices ET1 66012B
96,72 €
Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs. Starting from 5 watts, no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, light switch (push-button with spring mechanism) - remains in its original position after being pressed - rocker, socket, and triple frame - The system features the Busch-Jäger design: Future Linear matte black Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer: REV RITTER; dimmer knob, socket, push-button, rocker switch, and triple frame: Busch-Jäger // Manufacturer voltage tester: EBROM; A SET IDEA FROM EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer knob 6540-885-102 + push-button 2020US + socket with child protection 20EUCKS-885 Future Linear matte black + EBROM phase tester for installing the devices
111,18 €
Flush-mounted dimmer suitable for a wide range of light sources, simple incandescent bulbs or LEDs, from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, light switch (push-button with spring mechanism) - returns to its original position after actuation - rocker, socket with child protection, and triple frame - The system is in the Busch-Jäger design: Future Linear matte black Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the visual design of your existing Busch-Jäger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer dial, socket, push-button, push-button rocker, and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer cover plate 6540-885-102 and light push-button 2020 US in Future Linear matte black including EBROM phase tester for installation of the devices ET1 66012B
78,94 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, light switch (button with spring mechanism) - Returns to its original position after actuation - Rocker and double frame - The system is in the Busch-Jäger design: Future Linear matte black Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer: REV RITTER, dimmer dial, push-button, rocker switch and double frame: Busch-Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED rotary dimmer + Busch-Jaeger dimmer knob 6540-885-102 and socket 20EUC-885 in Future Linear matte black, including EBROM phase tester for installing the devices ET1 66012B
89,34 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, socket and double frame - The system features the Busch-Jäger Future Linear matte black design Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of illustrating the horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket and double frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
Our Videos
Learn more about our products and find out the most important information about cables
What does EBROM stand for?
Copper or aluminum?
Diameter vs. cross-section
HI-FLEX highly flexible
FLY Automotive Cables
Perfect pressings
Cable lugs DIN comparison
Free standard shipping to Germany from €60
Fast shipping within GermanyIn-house German assembly
Cable assemblies from our own productionSpecialist Consulting
Consultation by phone at +49 8074 9176911