All products
All cables
Analog and digital room thermostats
Automotive cables
Battery cable
Bell and lighting concepts
Blind switch
Cable by the metre
Campervan
Control cables
Data cable
Flexible cables
Flush-mounted radio
HI-FLEX battery cable
House
Installation cable
Light switches & dimmers
Network sockets
Other
Photovoltaics
Power cables
Rubber cable
Sauna
Silicone cables
Single-core wires
Sockets, Switches & Accessories
Solar cable
Special cable
TV SAT Radio Outlet Systems
Underground cable
Wall sockets
Welding cable
Workshop
REV Ritter LED Rotary Dimmer LED Dimmer with Busch-Jaeger Dimmer Knob Central Plate 6540-84-102 Single Frame in Future Linear Studio White Glossy + EBROM Phase Tester for Dimmer Installation ET1 66012B
51,90 €
Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs, starting from 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Can be used for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob and single frame - dimmer and knob in the design of Busch-Jäger: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the device Manufacturer LED dimmer: REV RITTER, dimmer knob and single frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM
REV Ritter LED Rotary Dimmer, LED dimmer with Busch-Jaeger dimmer dial central plate 6540-84-102, single frame in Future Linear matte black + EBROM phase tester for installing the dimmer, ET1 66012B
57,72 €
Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting from 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs, 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent lamps, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps on an electronic transformer. LED load: 5 to 100 watts, incandescent lamps: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob and single frame - dimmer and knob in the Busch-Jäger design: Future Linear, matte black Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent lamps: 25-300W, LV halogen lamps on transformer: 20-300VA. Protection: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Put together ready for installation by the cable experts at EBROM, including an EBROM phase tester for mounting the device LED dimmer manufacturer: REV RITTER, dimmer knob and single frame: Busch-Jäger // Phase tester manufacturer: EBROM; A SET IDEA BY EBROM
BUSCH JAEGER complete set / 2-gang network socket - 2-way UAE socket Cat.6A UAE 0218/12-101 + 2-meter branded patch cable 6a + frame + cover Future Linear studio white
45,27 €
UAE socket insert, RJ45, Cat. 6A, shielded, 2 jacks, 8/8-pin. With angled outlet and LSA insulation displacement connectors. RJ-45 connections for networks according to Cat. 6A, Class EA (10 Gbit/s / 500 MHz). Connection labeling A and B according to TIA/EIA-568-B.2. Design according to EN 60 603-7-51:2011-01. Shielding according to DIN EN 55022, Class B. Up to 500 MHz on all wire pairs. Suitable for 10-Gigabit Ethernet. Suitable for PoE+ according to IEEE 802.3at, ≥ 1,000 mating cycles. Flexible cable feed without kinking from all sides. Housing grounding possible via 6.3 mm flat connector on the back. Suitable for mix-and-match use. Suitable for RJ 11, RJ 12, and RJ 45 plugs. For data cables with a diameter of 6-10 mm. For wires of AWG 24-22. ------- RJ 45 patch cable CAT.6 S/FTP, LSZH halogen-free, cable jacket and boot in the same color, latch protection and length marking, service life (mating cycles) 750, operating temperature -15°C...60°C, color code ISO/IEC 11801. Cable construction Li-02YSCH, 4x2xAWG 27/7 PIMF. Inner conductor Cu-stranded wire 0.42 mm AWG 27 (7/0.14). Overall shielding tinned Cu braid, outer jacket 5.7 mm. NEXT at 100 MHz 92 dB. NEXT at 250 MHz 88 dB. Max. insertion loss at 100 MHz 2.98 dB/10 m. Max. insertion loss at 250 MHz 4.53 dB/10 m. Version: MP8 FS 600 S-FTP. Color: gray.
BUSCH JAEGER Complete Set/Antenna Socket Insert Radio/TV/SAT (**) WISI + 2-gang frame and cover incl. 1 x socket 20 EUC-84 in Future Linear studio white
46,70 €
BUSCH JÄGER complete set/antenna socket insert radio/TV/SAT (**) WISI + 2-gang frame and cover incl. 1 x socket 20 EUC-84 in Future Linear studio white
BUSCH JAEGER complete set/antenna socket insert radio/TV/SAT (**) WISI + 2-gang frame and cover incl. 1 x socket 20 EUC-84 in Future Linear studio white
46,27 €
The DB 53 is a 3-hole tap-off socket for satellite reception systems for the separate connection of radio, TV receivers, and additional SAT receivers. The SAT connection has an integrated DC bypass that allows the necessary switching voltages to be passed through. The housing offers very high stability and ensures high shielding properties (Class A). Thanks to its flat design, it is space-saving, and the IEC socket/plug and F-connector ensure a secure connection.
Busch-Jaeger 6523U-102 (2 pieces) LED rotary dimmer + dimmer covers 6540-84-102 in Future Linear studio white glossy in a 2-gang frame + EBROM phase tester for installing the devices 6523 U - 102
194,38 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-push change-over switch and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: 2 x LED dimmers, 2 x dimmer covers and double frame - Dimmer and covers in Busch-Jaeger design: Future Linear studio white glossy LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (ring of the dimmer is illuminated when "OFF") Ready for installation, assembled for you by the cable professionals at EBROM, includes EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer cover and frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 (2 pieces) LED rotary dimmer + dimmer covers 6540-885-102 in Future Linear matte black in 2-gang frame + EBROM phase tester for installing the devices 6523 U - 102
214,14 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-push change-over switch and soft-locking mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise operation through the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: 2 pieces LED dimmer, 2 x dimmer knob and double frame - dimmer and knobs in the design of Busch-Jaeger: Future Linear matte black LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - including glow lamp (the ring of the dimmer is illuminated when "OFF") Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer knob and frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer cover 6540-84-102 + 2 x intermediate switches 2000/7 US Future Linear studio white glossy including EBROM phase tester for mounting the devices 6523 U – 102
161,20 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-push switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, 2 x intermediate switches (for intermediate switching), rocker and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - including glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for installing the devices - This combination can be mounted both horizontally and vertically, the photo is for the purpose of showing horizontal mounting Manufacturer of LED dimmer, dimmer dial, intermediate switch, intermediate switch rocker and triple frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-84-102 + 2 x light push-buttons 2020 US in Future Linear studio white glossy, including EBROM phase tester for the installation of the 6523 U – 102 devices
147,16 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-button changeover switch, and soft-detent. 2-wire connection (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, 2 x light push-buttons (push-button with spring mechanism - remains in its original position after actuation), rocker, and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white gloss LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM voltage tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo shows the horizontal mounting configuration Manufacturer of LED dimmer, dimmer knob, push-button, push-button rocker, and triple frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer, dimmer knob 6540-84-102, and 2 x light switch 2000/6 US in Future Linear studio white glossy + EBROM phase tester for installation of the 6523 U-102 devices
147,16 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-sequence switch, and soft-detent. 2-wire connection (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional light sources possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer cover, 2 x light switches (two-way ON/OFF switches), rocker, and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - including glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer cover, switch, rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer cover 6540-84-102 and 2 x socket 20EUC-84 in Future Linear studio white glossy, including EBROM voltage tester for mounting the devices 6523 U – 102
145,50 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-sequence change-over switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed-load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise operation through the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, 2 x socket outlet, and triple frame - The system features the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer dial, sockets, and triple frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-885-102 + 2 x intermediate switch 2000/7 US Future Linear matte black, including EBROM phase tester for installing the devices 6523 U – 102
176,70 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-push changeover switch and soft-click mechanism. 2-wire connection (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, 2 x intermediate switches (for intermediate switching), rocker and triple frame - The system is in the Busch Jäger design: Future Linear matt black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of showing the horizontal mounting Manufacturer of LED dimmer, dimmer dial, intermediate switch, intermediate switch rocker and triple frame: Busch Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer, dimmer knob 6540-885-102 + 2 x light push-buttons 2020 US in Future Linear matte black, including EBROM phase tester for installation of the 6523 U – 102 devices
162,14 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-push changeover switch and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation through the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, 2 x light buttons (push-buttons with spring mechanism) - remain in their original position after activation - rocker and triple frame - The system is in the design of Busch-Jaeger: Future Linear matt black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable experts at EBROM, includes EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of LED dimmer, dimmer dial, push-button, push-button rocker and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-885-102 and 2 x light switch 2000/6 US in Future Linear matte black + EBROM voltage tester for installing the 6523 U-102 devices
162,14 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-switch and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10% / - 10% Consisting of: LED dimmer, dimmer dial, 2 x light switches (two-way ON/OFF switch), rocker and triple frame - The system features the Busch-Jaeger design: Future Linear matte black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustrative purposes of horizontal mounting Manufacturer of LED dimmer, dimmer dial, switch, switch rocker and 3-gang frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-885-102 and 2 x socket 20EUC-885 in Future Linear matte black, including EBROM voltage tester for installing the 6523 U-102 devices
161,20 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, 2 x socket and triple frame - The system is in the Busch Jäger design: Future Linear matt black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (the dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo is for illustration of horizontal mounting Manufacturer of LED dimmer, dimmer knob, sockets and triple frame: Busch Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Our Videos
Learn more about our products and find out the most important information about cables
What does EBROM stand for?
Copper or aluminum?
Diameter vs. cross-section
HI-FLEX highly flexible
FLY Automotive Cables
Perfect pressings
Cable lugs DIN comparison
Free standard shipping to Germany from €60
Fast shipping within GermanyIn-house German assembly
Cable assemblies from our own productionSpecialist Consulting
Consultation by phone at +49 8074 9176911