Sockets, Switches & Accessories (1618)

EBROM LED DIMMER UNIVERSAL PRO 1002, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Freely selectable dimming principle setting (leading-edge or trailing-edge), manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible, electronic short-circuit and overload protection and over-temperature protection with automatic reactivation, no stand-by consumption thanks to real on/off switch Consisting of: EBROM LED DIMMER TYPE 1003; Busch-Jaeger dimmer knob, 2 x socket with child protection and triple frame - The system is in the Busch-Jaeger design: Future Linear matt black EBROM flush-mounted LED dimmer UNIVERSAL ECO 1003 - trailing-edge and leading-edge dimmer. From 3 to 100 watts (e.g. also multiple 3.5 watt LEDs in one lamp) as well as for incandescent, HV and LV halogen lamps with electronic transformer from 10 to 220 W - Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz nominal voltage Important: please check before purchase whether the light source and/or transformer are dimmable. We recommend light sources from well-known manufacturers. Manually switchable, simple adjustment of min. and max. brightness as an optimization option for flicker-free dimming, automatic neutral wire detection, 2- or 3-wire connection possible. Extremely high compatibility with over 99% of all dimmable light sources available on the market Ready for installation, assembled for you by the cable experts at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of dimmer knob, sockets with child protection and triple frame: Busch-Jaeger // Manufacturer of LED dimmer and phase tester: EBROM; A SET IDEA BY EBROM

Blind switch insert 2000/4 US – for manual control of blinds & awnings This flush-mounted switch is ideally suited for the manual control of blind and awning motors. Thanks to the latching function, the rocker remains in the pressed position – for convenient operation without the need to hold it down. Technical features: • Mounting type: Flush-mounted – suitable for standard flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and side release lever • Mounting: Expansion claws or screws • Protection class: IP20 – suitable for dry indoor areas only • Circuit type: 1-pole switch, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: Not suitable for automatic controls. The operating force is approx. 2.5 – 3.5 N. ✔️ Convenient control with latching function: This blind switch remains in the pressed position – one press is enough, and the blind moves independently to the end position ✔️ Clearly labeled rockers with Up/Down symbols: The included rockers are clearly marked and ensure intuitive operation – ideal for anyone who prefers classic switch logic. ✔️ Clean lines in studio white gloss: Part of the Future Linear series – the linear design in glossy studio white gives every room a bright, modern touch and impresses with its timeless aesthetic and clear design language. ✔️ Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the device "Made in Germany" - Installation can be done horizontally or vertically ✔️ This set consists of: BUSCH JÄGER frame, blind switch, rocker, and EBROM phase tester - Manufacturer of frame, switch, and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Blind switch insert 2000/4 US – for manual control of blinds & awnings This flush-mounted switch is ideal for the manual control of blind and awning motors. Thanks to the latching function, the rocker remains in the pressed position – for convenient operation without having to hold it down. Technical features: • Installation type: Flush-mounted – suitable for standard flush-mounted boxes according to DIN 49073 • Connection type: Push-in terminal with rear conductor connection and side spring release • Mounting: Expansion claws or screws • Degree of protection: IP20 – suitable for dry indoor areas only • Switch type: 1-pole switch, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: Not suitable for automatic control systems. The operating force is approx. 2.5 – 3.5 N. ✔️ Convenient control with latching function: This blind switch stays in the pressed position – a single press is enough, and the blind moves automatically to its end position ✔️ Clearly labeled rockers with Up/Down symbols: The included rockers are clearly marked and ensure intuitive operation – ideal for those who prefer classic switch logic. ✔️ Clean lines in matte black: Part of the Future Linear series – the angular, modern design in elegant matte black adds striking, stylish accents to any environment and impresses with its timeless elegance and clear design language. ✔️ Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for installing the "Made in Germany" device - Can be mounted both horizontally and vertically ✔️ This set consists of: BUSCH JÄGER frame, blind switch, rocker, and EBROM phase tester - Manufacturer of frame, switch, and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA FROM EBROM

Blind push-button insert 2020/4 US – precise control with reset function This flush-mounted push-button is ideal for the precise, manual control of blinds and awnings. The rocker automatically returns to the starting position after being released – ideal for short-term operation or targeted intermediate stops. Technical features: • Mounting type: Flush-mounted – suitable for flush-mounted boxes according to DIN 49073 • Connection type: Plug-in terminal with rear conductor connection and side spring release • Mounting: Spreader or screws • Degree of protection: IP20 – for dry indoor areas • Switching type: 1-pole push-button, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: The blind only moves as long as the button is held down. The operating force is approx. 7.0 – 9.0 N – ideal for precise manual control. ✔️ Control with momentary function (without latching): With this blind switch, the button returns to the starting position after being pressed. The blind only moves as long as the button is held down – ideal for precise manual control. ✔️ Ideal for living spaces with short travel distances: Perfect if you do not want to open/close your blinds completely, but want to stop them at a specific position and fine-tune them. ✔️ Clear lines in studio white gloss: Part of the Future Linear series – the linear design in glossy studio white gives every room a bright, modern touch and impresses with its timeless aesthetic and clear design language. ✔️ Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the device "Made in Germany" - Installation can be done both horizontally and vertically ✔️ This set consists of: BUSCH JÄGER frame, blind push-button, rocker, and EBROM voltage tester - Manufacturer of frame, button, and rocker: BUSCH JÄGER // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

Blind push-button insert 2020/4 US – precise control with reset function This flush-mounted push-button is ideal for the precise, manual control of blinds and awnings. The rocker automatically returns to the starting position after being released – ideal for short-term operation or targeted intermediate stops. Technical features: • Mounting type: Flush-mounted – suitable for flush-mounted boxes according to DIN 49073 • Connection type: Plug-in terminal with rear conductor connection and side spring release • Fastening: Claw or screw • Protection class: IP20 – for dry interior areas • Switching type: 1-pole push-button, 2 buttons (Up/Down) Electrical data: • Rated voltage: 250 V • Rated current: 10 A • Maximum switching capacity: 100 V·A LEDi Note: The blind only moves as long as the button is held down. The operating force is approx. 7.0 – 9.0 N – ideal for precise manual control. ✔️ Control with push-button function (momentary): With this blind switch, the button returns to the starting position after being pressed. The blind only moves as long as the button is held down – ideal for precise manual control. ✔️ Ideal for living spaces with short travel distances: Perfect if you do not want to open/close your blinds completely, but want to stop them at specific points and fine-tune them. ✔️ Clear lines in matte black: Part of the Future Linear series – the angular, modern design in elegant matte black brings striking, stylish accents to any environment and impresses with its timeless elegance and clear design language. ✔️ Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the device "Made in Germany" - Installation can be done horizontally or vertically ✔️ This set consists of: BUSCH JÄGER frame, blind push-button, rocker, and EBROM phase tester - Manufacturer of frame, button, and rocker: BUSCH JÄGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

UAE socket insert,

EBROM's BJ Sets BUSCH-JAEGER Complete Set / 2-gang network socket - 2-way UAE connection socket Cat.6A Rutenbeck + 1-gang frame + cover - in Busch-Jaeger Future Linear studio white

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting at 5 watts, no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs, from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmers, 2 x Busch-Jaeger dimmer knobs and double frame - dimmer and knobs in the Busch-Jaeger design: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jaeger components included in the set, you can effortlessly convert this REV dimmer so that it fits perfectly into the existing design of your Busch-Jaeger switch system at home. Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob and frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting at 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary adjustment, white, including frame and cover. Full power range from 5 to 300 watts; for LEDs, 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: 2 x REV Ritter LED dimmers, 2 x Busch-Jäger dimmer knobs and a double frame - dimmer and knobs in the Busch-Jäger design: Future Linear, matte black Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in this set, you can easily adapt this REV dimmer so that it blends seamlessly into the existing design of your Busch-Jäger switch system at home. Ready-to-install set assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of LED dimmer: REV RITTER, dimmer knob and frame: Busch-Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer switch suitable for a wide variety of lamps, from simple incandescent bulbs to LEDs, starting at 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x intermediate switches (for intermediate switching), rocker and triple frame - The system features the Busch-Jäger design: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly convert this REV dimmer so that it fits perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo shows the horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, intermediate switch, intermediate switch rocker, and 3-gang frame: Busch Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting at 5 watts, no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts; for LEDs, 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x light push-buttons (push-button with spring mechanism) – returns to its original position after being pressed – rocker and triple frame – the system features the Busch-Jäger design: Future Linear, studio white gloss Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in this set, you can easily adapt this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo shows the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, push-button, push-button rocker, and triple frame: Busch-Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. Starting from 5 watts, no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary adjustment, white, including frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer dial, 2 x socket with child protection, and triple frame - The system features the Busch-Jäger design: Future Linear, glossy studio white Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dial, sockets with child protection, and triple frame: Busch-Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting from 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary adjustment, white, including frame and cover. Full power range from 5 to 300 watts; for LEDs, 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jaeger dimmer dial, 2 x light switches (two-way ON/OFF switches), rocker, and triple frame - The system features the Busch-Jaeger design: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse protection: Miniature fuse: F2AH/250V~ - Operating principle: Trailing edge With the Busch-Jaeger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Ready-to-install set assembled for you by the cable professionals at EBROM, including an EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for illustrative purposes showing horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer dial, switch, switch rocker, and triple frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent lamps, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent lamps: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch Jäger dimmer knob, 2 x socket and triple frame - The system features the Busch Jäger design: Future Linear studio white glossy Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent lamps: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready for installation and put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted either horizontally or vertically; the photo serves to illustrate the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, sockets and 3-gang frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting at 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary control, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, and low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x intermediate switches (for intermediate switching), rocker, and triple frame - The system features the Busch-Jäger design: Future Linear, matte black Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, low-voltage halogen lamps with transformer: 20-300VA. Protection: micro-fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready-to-install set assembled for you by the cable experts at EBROM, including an EBROM voltage tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of demonstrating the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, intermediate switch, intermediate switch rocker, and triple frame: Busch-Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM