Sockets, Switches & Accessories (1618)

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary adjustment, white with frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x light push-buttons (push-button with spring mechanism - returns to its original position after actuation), rocker, and triple frame - The system features the Busch-Jäger Future Linear design in matte black Flush-mounted dimmer for dimmable LED lamps: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jäger components included in the set, you can effortlessly retrofit this REV dimmer so that it fits perfectly into the existing design of your Busch-Jäger switch system at home. Ready-to-install set assembled for you by the cable professionals at EBROM, including an EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer: REV RITTER; dimmer knob, push-button, push-button rocker, and triple frame: Busch-Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer switch suitable for a wide range of light sources, from standard incandescent bulbs to LEDs, starting from 5 watts, with no interference, flickering, or similar artifacts. Trailing-edge dimmer with rotary adjustment, white, including frame and cover. Full power range from 5 to 300 watts; for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x socket outlets with child protection, and triple frame - The system features the Busch-Jäger Future Linear matte black design Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Fuse: fine-wire fuse: F2AH/250V~ - Operating principle: trailing edge With the included Busch-Jäger components, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jäger switch system at home. Ready-to-install set assembled for you by the cable professionals at EBROM, including an EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo shows horizontal mounting Manufacturer LED dimmer: REV RITTER, dimmer knob, socket outlets with child protection and triple frame: Busch-Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide range of light sources, from simple incandescent bulbs to LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge phase dimmer with rotary setting, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Suitable for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jäger dimmer knob, 2 x light switches (two-way ON/OFF switches), rocker and triple frame - The system features the Busch-Jäger design: Future Linear matte black Flush-mounted dimmer for dimmable LED bulbs: 5-100 watts, incandescent bulbs: 25-300W, LV halogen lamps with transformer: 20-300VA. Protection: fine-wire fuse: F2AH/250V~ - Operating principle: Trailing-edge phase With the Busch-Jäger components included in the set, you can easily convert this REV dimmer so that it fits perfectly into the existing design of your Busch-Jäger switch system at home. Assembled ready for installation by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer of LED dimmer: REV RITTER, dimmer knob, switches, switch rocker and 3-gang frame: Busch Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted dimmer suitable for a wide variety of light sources, simple incandescent bulbs or LEDs. From 5 watts, no interference, no flickering or similar artifacts. Trailing-edge dimmer with rotary setting, white with frame and cover. Full power range from 5 to 300 watts, for LEDs from 5 to 100 watts. Can be used for: dimmable LED lamps, incandescent bulbs, high-voltage halogen lamps, dimmable energy-saving lamps, low-voltage halogen lamps with an electronic transformer. LED load: 5 to 100 watts, incandescent bulbs: 25 to 300 watts, electronic transformer load: 20 to 300 VA Consisting of: REV Ritter LED dimmer, Busch-Jaeger dimmer knob, 2 x socket and triple frame - The system is in the Busch-Jaeger Future Linear matte black design Flush-mounted dimmer for dimmable LED light sources: 5-100 watts, incandescent bulbs: 25-300W, LV-halogen lamps with transformer: 20-300VA. Protection: miniature fuse: F2AH/250V~ - Operating principle: trailing-edge With the Busch-Jaeger components included in the set, you can easily retrofit this REV dimmer so that it blends perfectly into the existing design of your Busch-Jaeger switch system at home. Pre-assembled for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer LED dimmer: REV RITTER, dimmer knob, sockets and triple frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

BUSCH JÄGER Complete Set/Antenna Socket Insert Radio/TV/SAT (**) WISI + 3-Gang Frame and Cover incl. 2 x Sockets 20 EUC-84 Future Linear Studio White

The DB 53 is a 3-hole wall outlet for satellite reception systems for the separate connection of radio, TV receivers, and additional SAT receivers. The SAT connection features an integrated DC bypass that allows for the transmission of the required switching voltages. The housing offers high stability and ensures superior shielding properties (Class A). Thanks to its flat design, it is space-saving, and the IEC socket/plug and F-connector ensure a secure connection.

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: 3 LED dimmers, 3 x dimmer knobs, and a triple frame - Dimmers and knobs in Busch-Jaeger design: Future Linear studio white glossy LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready-to-install set assembled for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer of LED dimmer, dimmer knob, and frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-switch and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: 3 pieces LED dimmer, 3 x dimmer knob and triple frame - Dimmer and knobs in the design by Busch-Jaeger: Future Linear matt black LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer knob and frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and soft-detent. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), including those operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Additionally, it supports mixed load operation with LEDi and conventional lamps. For customized adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge dimming, as well as adjustable minimum and maximum brightness. By using MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When using conventional transformers, approximately 20% transformer losses should be considered; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive dated July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 3 pieces LED dimmer, 3 x dimmer plate and triple frame - dimmer and plates in the design of Busch Jäger: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge dimming adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer LED dimmer, dimmer plate and frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and soft-click detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), both for those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Furthermore, it supports mixed load operation with LEDi and conventional light sources. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included in the scope of delivery of the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 3 pieces of LED dimmer, 3 x dimmer plate and triple frame - dimmer and plates in the design of Busch-Jaeger: Future Linear matte black The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof as well as overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - including glow lamp (ring of the dimmer is illuminated when "OFF") Ready-to-install set assembled for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer plate and frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Busch-Jaeger DAB+ flush-mounted radio UP Radio 8215 U-101 (8215U-101) complete set Future Linear studio white + 2 x loudspeakers in 3-gang frame 1723-184K + 0.9 meter EBROM wire antenna for reception optimization

Product consisting of: Busch-Jaeger Future Linear studio white glossy: central plate + 2 x loudspeaker covers + loudspeaker inserts / DAB+ flush-mounted radio / 3-gang frame - DAB+ and RDS stereo alarm clock radio for flush-mounted installation. With high-resolution color display for showing additional information. Reception frequency: 87.50 MHz - 108.00 MHz. Reception frequency (DAB+): 174 MHz – 240 MHz. With external AUX input/output, switchable. For mono/stereo operation. 8 radio stations can be saved. With time and date display. With individual alarm and snooze function. With automatic switch-off function (sleep timer). With extension input for remote ON/OFF switching. With integrated antenna. With additional connection for an external antenna. Permissible loudspeaker impedance: 4 - 8 Ohm - Control elements: 4-button operation via floating rocker - Display elements: IPS graphic display with 280 DPI. Nominal voltage: 230 V~, +10 % / -10 %, nominal frequency: 50 Hz / 60 Hz - Power loss: 0.4 W - Control/signal outputs: 2 loudspeaker outputs, impedance 4 Ohm - Nominal power: 2 W (RMS) - Degree of protection of device: IP 20 - Temperature range of device: 5 °C - 40 °C - Storage temperature range: -20 °C - 70 °C - Dimensions (H x W x D): 71 mm x 71 mm x 47 mm - Installation depth: 32 mm - No spreader claws. Screw mounting via keyholes incl. 0.9 meter EBROM wire antenna for reception optimization

The ASTRO GUT400 represents the latest generation of 4-hole terminal outlets, specially developed for the reception of terrestrial, satellite, radio, and TV programs. With an impressive frequency range of 40 to 2400 MHz, it covers all common reception bands: 40-70 MHz, 87.5-108 MHz, 174-862 MHz, and 950-2150 MHz. Particularly noteworthy is the 500 mA DC pass-through function via the F-connector, which ensures continuous and reliable transmission. Regarding connection attenuation, the outlet impresses with values of 1.5 ± 1 dB for TV, typically 10 dB for SAT1, and 1 ± 0.5 dB for SAT2. Return losses are also optimized, with inputs achieving > 6 dB and SAT1/2 values of > 10 dB. Another highlight is the significant decoupling between input and SAT1/SAT2 with typical 20 / 25 dB. This promises minimal interference between the various connections, thereby guaranteeing first-class signal quality. The compact and intelligent design of the ASTRO GUT400 allows for simple screw and claw mounting and is optimally suited for installation in 55mm wall boxes. Manufactured in Germany, it stands not only for technical perfection but also for quality and durability. So, if you are looking for a state-of-the-art, reliable, and high-performance terminal outlet, the ASTRO GUT400 is the perfect choice. It not only brings your media connections to a new level but is also a symbol of German engineering and quality. Maximize your satellite and cable TV reception with the ASTRO GUT400, a premium 4-hole outlet for radio, TV, and SAT. Thanks to the DC bypass in the SAT connection, interference-free signal transmission is guaranteed. Excellent shielding and solid construction ensure reliability. The precise connections (IEC & F-connector) offer high security and longevity. In a 3-gang frame with two Busch-Jaeger SCHUKO sockets, this SET enables an additional power supply. Frequency range 40-2400 MHz. TV 174-862 MHz, FM 87.5-108 MHz, SAT1 950-2150 MHz, SAT2 2150-2400 MHz. Decoupling SAT1/SAT2: typ. 20/25 dB. Return loss: TV/FM > 6 dB, SAT > 6/10 dB. 500 mA DC pass-through via F-connector. For 55mm wall boxes, screw/claw mounting. This set consists of: 3-gang frame, terminal outlet/end outlet, 4-hole cover, 2 x socket, and EBROM phase tester Ready for installation, assembled for you by the cable professionals at EBROM Manufacturer 4-hole outlet: ASTRO // Manufacturer sockets, frame, and cover(s): BUSCH-JAEGER // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Optimize your media and power connections with the universal 2-hole through-wall socket and the integrated Busch-Jaeger SCHUKO socket. The elegant Busch-Jaeger design blends seamlessly into any environment and ensures reliable connections. The through-wall socket supports a wide frequency range from 5 to 2400 MHz and is suitable for cable (BK) and SAT single-cable solutions. Two IEC ports and high decoupling ensure interference-free operation of your devices. A high shielding level of Class A guarantees optimal signal quality. This flexible, space-saving set, manufactured in Germany, promises the highest quality and durability. Improve your media experience and power supply with this high-performance combination The 2-hole through-wall socket offers flexibility and security. It is ideal for various applications and supports efficient signal distribution. With its wide frequency range of 5 to 2400 MHz and 2 IEC ports, it allows for high adaptability. In a 3-gang frame together with two elegant Busch-Jaeger SCHUKO sockets, this set offers not only optimal signal distribution but also a practical power supply option. The through-wall socket is ideal for private use, e.g., in a single-family home with multiple televisions. Imagine having the connection in the living room and wanting to receive the signal in the bedroom and children's room as well. With the through-wall socket, you can pass the signal through from the living room and enjoy it on other devices. Furthermore, the high connection attenuation ensures excellent signal quality on every device in the house. This set consists of: 3-gang frame, flush-mounted through-wall socket with cover, 2 x power socket, and EBROM phase tester // Note: The Future Linear version features a cover designed for the Busch-Jaeger 3-hole TV/SAT/radio variant. The third hole in the cover is perforated. If you are using the 2-hole version, please DO NOT break out the perforated hole Ready for installation, assembled for you by the cable professionals at EBROM Manufacturer of through-wall socket: WISI // Manufacturer of sockets, frame, and cover(s): BUSCH-JAEGER // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

EBROM LED DIMMER 1001, suitable for dimmable LED lamps, dimmable LED drivers, incandescent lamps, HV and LV halogen lamps with electronic transformer. Silent Technology, noise-free. Adjustable min. and max. range for flicker-free dimming, electronic overtemperature/short-circuit and overload protection with automatic reactivation. No stand-by consumption (true on/off switch) Consisting of: 3 pieces EBROM LED DIMMER TYPE 1001, 3 x Busch Jäger dimmer knob and triple frame - dimmers and knobs in the design of Busch Jäger: Future Linear studio white glossy EBROM flush-mounted LED trailing-edge dimmer, rotary dimmer, including Busch Jäger components for the perfect visual complement to your existing Busch Jäger switch system. Can be mounted horizontally or vertically. For dimmable LED lamps (this dimmer covers a very wide range!) from 5 to 150 watts as well as for incandescent, HV and LV halogen lamps with electronic transformer from 15 to 400 W Absolutely silent operation, no humming or buzzing, dimensions: 71 x 71 x 33 mm, 230 V~, 50 Hz rated voltage - adjustable minimum brightness and adjustable maximum brightness for optimal fine-tuning of the dimmer, electronic short-circuit, overtemperature and overload protection with automatic reactivation Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices Manufacturer of dimmer knob and frame: Busch Jäger // Manufacturer of LED dimmer and voltage tester: EBROM; A SET IDEA BY EBROM