Sockets, Switches & Accessories (1618)

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and soft-click detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), both for those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For individual customization, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 VA. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 2 pieces LED dimmer, 2 x dimmer dial, light button (push-button with spring mechanism) returns to its original position after actuation - rocker and triple frame - The system is in the design of Busch Jäger: Future Linear matt black The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - Including glow lamp (ring of the dimmer is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer dials, push-buttons, push-button rocker, and triple frame: Busch Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), whether operated on conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Additionally, it supports mixed load operation with LEDi and conventional light sources. For individual adjustment, the dimmer offers manually selectable operating modes for leading-edge and trailing-edge phase control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit and overload-proof thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be considered, and approximately 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 2 x LED dimmers, 2 x dimmer dials, light switch (two-way ON/OFF switch), rocker, and triple frame - The system is in the Busch Jäger: Future Linear matte black design The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit and overload-proof. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Pre-assembled ready for installation by the cable experts at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer dials, switches, switch rocker, and triple frame: Busch Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and soft-click detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), whether operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed-load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control as well as adjustable minimum and maximum brightness. By using MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included in the scope of delivery of the central plate. When used with conventional transformers, about 20% transformer loss should be taken into account, and about 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 2 x LED dimmer, 2 x dimmer plate, socket outlet with child protection, and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (ring of the dimmer is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer plates, socket with child protection, and triple frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), whether operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional light sources. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. By using MOSFET transistors, it operates quietly. It is short-circuit and overload protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When using conventional transformers, approximately 20% transformer losses should be taken into account, and approximately 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 2 x LED dimmer, 2 x dimmer dial, socket with child protection, and triple frame - The system is in the design of Busch Jäger: Future Linear matt black The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit and overload protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer dials, socket with child protection, and triple frame: Busch Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), both for those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates with low noise. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a rated voltage of 230 V~ (+/- 10%), a rated frequency of 50/60 Hz, and a rated output of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included in the scope of delivery of the central plate. When used with conventional transformers, about 20% transformer losses should be taken into account, and about 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and an output of 2 to 400 VA. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has a degree of protection of IP20. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer dial, intermediate switch (for intermediate switching), rocker, and double frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The rated voltage is 230 V~ (+/- 10%) with an output of 2 - 100 W/VA (leading-edge) and rated output: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer dial, intermediate switch, intermediate switch rocker, and double frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion claw mechanism. It features rotary operation, a push-to-toggle switch, and soft-click detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), including those operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed-load operation with LEDi and conventional light sources. For customized adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included in the scope of delivery of the central plate. When using conventional transformers, approximately 20% transformer losses should be taken into account, and approximately 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU Directive RoHS 3 of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer knob, intermediate switch (for intermediate switching), rocker, socket, and triple frame - The system is in the design of Busch-Jaeger: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require an expansion claw. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and is compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and a nominal power of 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (ring of the dimmer is illuminated when "OFF") Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer knob, socket, intermediate switch, intermediate switch rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), both those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed-load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control as well as adjustable minimum and maximum brightness. By using MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included in the scope of delivery of the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 degree of protection. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer plate, light switch (two-way switch ON/OFF), rocker, and double frame - The system is in the Busch Jäger design: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer, dimmer plate, switch, switch rocker, and 2-gang frame: Busch Jäger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM

This compact dimmer features a low installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and soft-click detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), whether operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For customized adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer loss should be taken into account, or approximately 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 VA. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer dial, light switch (changeover switch ON/OFF), rocker, socket, and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion claws. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof as well as overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation and assembled for you by the cable professionals at EBROM, including an EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer dial, socket, switch, switch rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and soft detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), including those operated on conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For customized adjustments, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge dimming, as well as adjustable minimum and maximum brightness. By using MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected due to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When using conventional transformers, approximately 20% transformer loss should be taken into account, and approximately 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive dated July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer plate, light switch (push-button with spring mechanism) - remains in its original position after actuation - rocker, socket, and triple frame - The system is in the design of Busch Jäger: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of under 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power output of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (the dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to demonstrate horizontal mounting Manufacturer of LED dimmer, dimmer plate, socket, push-button, push-button rocker, and triple frame: Busch Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its low installation depth of less than 20 mm and does not require an expansion claw mechanism. It features rotary operation, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), whether operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included in the scope of delivery of the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer plate, light button (button with spring mechanism) - remains in its original position after actuation - rocker and double frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof as well as overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - including glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for the purpose of demonstrating horizontal mounting Manufacturer LED dimmer, dimmer plate, button, button rocker and double frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its low installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), whether operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Additionally, it supports mixed load operation with LEDi and conventional light sources. For individual adjustment, the dimmer offers manually selectable operating modes for leading-edge and trailing-edge phase control, as well as adjustable minimum and maximum brightness. Using MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a rated voltage of 230 V~ (+/- 10%), a rated frequency of 50/60 Hz, and a rated power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be accounted for, and approximately 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive dated July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer cover, socket, and double frame - The system is in the Busch Jäger design: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The rated voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and rated power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for demonstration of horizontal mounting Manufacturer of LED dimmer, dimmer cover, socket, and double frame: Busch Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion claw mechanism. It features a rotary control, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), including those operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional light sources. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. By using MOSFET transistors, it operates quietly. It is short-circuit and overload-proof thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be considered, and approximately 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer dial, intermediate switch (for intermediate switching), rocker, and double frame - The system is in the Busch-Jäger Future Linear matte black design The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion claws. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit and overload-proof. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of LED dimmer, dimmer dial, intermediate switch, intermediate switch rocker, and double frame: Busch-Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer features a shallow installation depth of less than 20 mm and requires no spreading mechanism. It is equipped with a rotary control, a push-button changeover switch, and a soft-click detent. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), whether operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For individual customization, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness levels. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When using conventional transformers, approximately 20% transformer losses should be taken into account, and approximately 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power rating of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer dial, intermediate switch (for intermediate switching), rocker, socket, and triple frame - The system is in the Busch-Jaeger Future Linear matte black design The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no spreading claws. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power rating of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - Includes glow lamp (the dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of LED dimmer, dimmer dial, socket, intermediate switch, intermediate switch rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and soft-click detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), both for those operated with conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer plate, light switch (two-way ON/OFF switch), rocker, and double frame - The system is in the Busch-Jaeger: Future Linear matte black design The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable experts at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer plate, switch, switch rocker, and 2-gang frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and soft-click detents. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), including those operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional light sources. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. By using MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: LED dimmer, dimmer cover, light switch (two-way switch ON/OFF), rocker, socket, and triple frame - The system is in the Busch-Jaeger design: Future Linear, matte black The LED rotary dimmer type 6523 UR-104 has an installation depth of under 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and a nominal power of 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - Includes glow lamp (the ring of the dimmer is illuminated when "OFF") Ready for installation, assembled for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer cover, socket, switch, switch rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM