All products
All cables
Analog and digital room thermostats
Automotive cables
Battery cable
Bell and lighting concepts
Blind switch
Cable by the metre
Campervan
Control cables
Data cable
Flexible cables
Flush-mounted radio
HI-FLEX battery cable
House
Installation cable
Light switches & dimmers
Network sockets
Other
Photovoltaics
Power cables
Rubber cable
Sauna
Silicone cables
Single-core wires
Sockets, Switches & Accessories
Solar cable
Special cable
TV SAT Radio Outlet Systems
Underground cable
Wall sockets
Welding cable
Workshop
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-885-102 and light push-button 2020 US and 1786-885 in MATTE BLACK including EBROM phase tester for installing the devices (6523 U – 102)
122,62 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-sequence button/push-button and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10% / - 10% Consisting of: LED dimmer, dimmer dial, light switch (push-button with spring mechanism) - returns to its original position after being pressed - rocker and double frame - The system is in the design of Busch-Jaeger: MATT BLACK LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - Includes glow lamp (ring of the dimmer is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices Manufacturer of LED dimmer, dimmer dial, push-button, rocker and double frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-885-102 and socket 20EUC-885 in Future Linear matte black including EBROM phase tester for mounting the devices 6523 U – 102
143,42 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-switch, and soft-click mechanism. 2-wire connection (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer cover, socket, and double frame - The system is in the Busch-Jaeger Future Linear matte black design LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (the ring of the dimmer is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer cover, socket, and double frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + 6540-885-102 dimmer knob and 20EUC-885 socket in MATTE BLACK including EBROM phase tester for device installation (6523 U – 102)
122,62 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-action change-over switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, socket, and double frame - The system is in the design of Busch-Jaeger: MATT BLACK LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for installing the devices Manufacturer of LED dimmer, dimmer knob, socket, and double frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer, dimmer knob 6540-885-102, and socket with child protection 20EUCKS-885 in MATTE BLACK, including EBROM voltage tester for installing the devices (6523 U – 102)
127,82 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-push switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer cover, socket with child protection and double frame - The system is in the design of Busch-Jaeger: MATT BLACK LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation and assembled for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices Manufacturer of LED dimmer, dimmer cover, socket with child protection and double frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + cover plate 6540-84-102 + intermediate switch 2000/7US + socket with child protection 20EUCKS-84 Future Linear studio white + EBROM phase tester for installing the devices
151,74 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, intermediate switch (for intermediate switching), rocker, socket with child protection, and triple frame - The system is in the Busch-Jaeger Future Linear studio white glossy design LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - including glow lamp (dimmer ring is illuminated when "OFF") Put together ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for demonstration of horizontal mounting Manufacturer of LED dimmer, dimmer dial, socket, intermediate switch, intermediate switch rocker, and 3-gang frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer dimmer + cover plate 6540-84-102 + light switch 2000/6US + socket with child protection 20EUCKS-84 Future Linear studio white + EBROM phase tester for mounting the devices
143,42 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-sequence switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, light switch (two-way ON/OFF switch), rocker, socket with child protection, and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer dial, socket, switch, switch rocker, and triple frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer dimmer + cover 6540-84-102 + socket with child protection 20EUCKS-84 in Future Linear studio white glossy + EBROM phase tester for installation of the devices (6523 U – 102)
122,62 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-switch and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer cover, socket with child protection and double frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready-to-install, assembled for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices Manufacturer of LED dimmer, dimmer cover, socket with child protection and double frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + cover plate 6540-84-102 + socket with child protection 20EUCKS-84 in Future Linear studio white glossy + EBROM phase tester for installation of devices 6523 U – 102
138,00 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-push switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central cover plate. Nominal voltage: 230 V~, + 10 % / - 10 %
Busch Jäger 6523U-102 LED Rotary Dimmer + Cover 6540-84-102 + Push-button 2020US + Socket with child protection 20EUCKS-84 Future Linear studio white + EBROM phase tester for installation of devices 6523 U – 102
145,50 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed-load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer cover plate, light push-button (push-button with spring mechanism - returns to its original position after actuation), rocker, socket outlet with child protection, and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of LED dimmer, dimmer cover plate, socket, push-button, rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + 6540-84-102 cover plate and 2000/7 US intermediate switch in Future Linear studio white glossy, including EBROM phase tester for installing the devices (6523 U – 102)
122,62 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-push changeover switch and soft-click detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional illuminants is possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, intermediate switch (for intermediate switching), rocker and double frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices Manufacturer of LED dimmer, dimmer knob, intermediate switch, intermediate switch rocker and double frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + cover plate 6540-84-102 and light switch 2000/6 US in Future Linear studio white glossy, including EBROM phase tester for installing the devices (6523 U – 102)
117,42 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-button switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, light switch (two-way switch ON/OFF), rocker, and double frame - The system features the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer Type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Including glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for installing the devices Manufacturer of LED dimmer, dimmer knob, switch, rocker, and double frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + cover plate 6540-84-102 and light switch 2020 US in Future Linear studio white glossy including EBROM phase tester for mounting the devices (6523 U – 102)
117,42 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selection button. With rotary operation, pressure sequence push-button / push-button and soft-catch. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selection button. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, light push-button (push-button with spring mechanism - returns to its original position after actuation), rocker and double frame - The system is in the design of Busch-Jaeger: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices Manufacturer of LED dimmer, dimmer dial, push-button, push-button rocker and 2-gang frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + cover plate 6540-84-102 and socket 20EUC-84 in Future Linear studio white glossy, including EBROM phase tester for device installation (6523 U – 102)
117,42 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise operation through the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central cover plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, socket, and double frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices Manufacturer of LED dimmer, dimmer knob, socket, and 2-gang frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + cover plate 6540-885-102 + intermediate switch 2000/7US + socket with child protection 20EUCKS-885 Future Linear matte black + EBROM phase tester for device installation
166,30 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-sequence change-over switch and soft-click mechanism. 2-wire connection (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, intermediate switch (for intermediate circuit), rocker, socket outlet with child protection and triple frame - The system is in the design of Busch-Jaeger: Future Linear matte black LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable experts at EBROM, includes EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer dial, socket outlet, intermediate switch, intermediate switch rocker and 3-gang frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + cover plate 6540-885-102 + light switch 2000/6US + socket with child protection 20EUCKS-885 Future Linear matte black + EBROM phase tester for installation of the devices
157,98 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-button switch and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, light switch (two-way ON/OFF), rocker, socket with child protection and triple frame - The system is in the Busch-Jaeger design: Future Linear, matt black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of LED dimmer, dimmer dial, socket, switch, switch rocker and triple frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Our Videos
Learn more about our products and find out the most important information about cables
What does EBROM stand for?
Copper or aluminum?
Diameter vs. cross-section
HI-FLEX highly flexible
FLY Automotive Cables
Perfect pressings
Cable lugs DIN comparison
Free standard shipping to Germany from €60
Fast shipping within GermanyIn-house German assembly
Cable assemblies from our own productionSpecialist Consulting
Consultation by phone at +49 8074 9176911