All products
All cables
Analog and digital room thermostats
Automotive cables
Battery cable
Bell and lighting concepts
Blind switch
Cable by the metre
Campervan
Control cables
Data cable
Flexible cables
Flush-mounted radio
HI-FLEX battery cable
House
Installation cable
Light switches & dimmers
Network sockets
Other
Photovoltaics
Power cables
Rubber cable
Sauna
Silicone cables
Single-core wires
Sockets, Switches & Accessories
Solar cable
Special cable
TV SAT Radio Outlet Systems
Underground cable
Wall sockets
Welding cable
Workshop
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer cover 6540-84-102 + intermediate switch 2000/7 US in Future Linear studio white glossy including EBROM phase tester for mounting the 6523 U-102 devices
135,10 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-button changeover switch and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer cover plate, intermediate switch (for intermediate switching), rocker and 2-gang frame - The system is in the design of Busch-Jaeger: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - including glow lamp (ring of the dimmer is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer cover plate, intermediate switch, intermediate switch rocker and 2-gang frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-84-102 + intermediate switch 2000/7US + socket 20EUC-84 Future Linear studio white + EBROM phase tester for installation of the 6523 U – 102 units
145,50 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-button change-over switch and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10% / - 10% Consisting of: LED dimmer, dimmer cover plate, intermediate switch (for intermediate switching), rocker, socket and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, includes EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo is for the purpose of illustrating horizontal mounting Manufacturer of LED dimmer, dimmer cover plate, socket, intermediate switch, intermediate switch rocker and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-84-102 + light switch 2000/6 US in Future Linear studio white glossy including EBROM phase tester for mounting the 6523 U – 102 devices
128,86 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-switch and soft-click mechanism. 2-wire connection (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer cover plate, light switch (two-way switch ON/OFF), rocker and double frame - The system is in the Busch Jäger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready-to-install, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo shows horizontal mounting Manufacturer of LED dimmer, dimmer cover plate, switch, switch rocker and double frame: Busch Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer cover 6540-84-102 + light switch 2000/6US + socket 20EUC-84 Future Linear studio white + EBROM phase tester for installation of devices 6523 U – 102
138,22 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-button switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without center plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, light switch (two-way switch ON/OFF), rocker, socket, and triple frame - The system features the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, includes EBROM voltage tester for installing the devices - This combination can be mounted both horizontally and vertically, the photo shows the horizontal mounting Manufacturer LED dimmer, dimmer dial, socket, switch, switch rocker, and 3-gang frame: Busch-Jaeger // Manufacturer voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-84-102 + push-button 2020US + socket 20EUC-84 Future Linear studio white glossy + EBROM phase tester for installation of devices 6523 U – 102
141,34 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-button switch and soft-click mechanism. 2-wire connection (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, light push-button (push-button with spring mechanism - remains in its original position after operation), rocker, socket outlet and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Ready-to-install set assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of horizontal mounting Manufacturer of LED dimmer, dimmer knob, socket, push-button, rocker and triple frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-84-102 and light push-button 2020 US in Future Linear studio white glossy including EBROM phase tester for installation of the 6523 U – 102 devices
131,98 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-switch and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, light switch (push-button with spring mechanism) returns to its original position after actuation - rocker and double frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer knob, push-button, push-button rocker and 2-gang frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer, dimmer + dimmer cover 6540-84-102 and socket 20EUC-84 in Future Linear studio white glossy, including EBROM phase tester for installation of the devices 6523 U – 102
131,98 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10% / - 10% Consisting of: LED dimmer, dimmer knob, socket, and double frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer knob, socket, and double frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer, dimmer cover 6540-885-102, and intermediate switch 2000/7 US in Future Linear matte black, including EBROM phase tester for installation of the 6523 U-102 devices
148,62 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-sequence switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, intermediate switch (for intermediate switching), rocker, and 2-gang frame - The system features the Busch-Jaeger design: Future Linear matte black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, includes EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer dial, intermediate switch, intermediate switch rocker, and 2-gang frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-885-102 + intermediate switch 2000/7US + socket 20EUC-885 Future Linear matte black + EBROM phase tester for device installation
160,06 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-push change-over switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise operation due to MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer cover plate, intermediate switch (for intermediate circuit), rocker, socket outlet, and triple frame - The system is in the Busch-Jaeger design: Future Linear matte black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Pre-assembled ready for installation by the cable experts at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for demonstration of the horizontal installation Manufacturer of LED dimmer, dimmer cover plate, socket outlet, intermediate switch, intermediate switch rocker, and 3-gang frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + 6540-885-102 dimmer cover + 2000/6 US light switch in Future Linear matte black, including EBROM phase tester for mounting the 6523 U-102 devices
141,34 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-button changeover switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed-load operation with LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise operation due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer cover, light switch (changeover switch ON/OFF), rocker, and 2-gang frame - The system is in the Busch-Jäger design: Future Linear, matte black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled and ready for installation by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer of LED dimmer, dimmer cover, switch, rocker, and 2-gang frame: Busch-Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + 6540-885-102 dimmer cover plate + 2000/6US light switch + 20EUC-885 socket outlet Future Linear matt black + EBROM voltage tester for installation of the devices
152,78 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-push change-over switch, and soft-click mechanism. 2-wire connection (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, light switch (change-over switch ON/OFF), rocker, socket outlet, and triple frame - The system is in the Busch-Jaeger design: Future Linear, matt black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer of LED dimmer, dimmer dial, socket outlet, switch, switch rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-885-102 + push-button 2020US + socket 20EUC-885 Future Linear matte black + EBROM voltage tester for installing devices 6523 U – 102
155,90 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-button switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional light sources possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer dial, light push-button (push-button with spring mechanism - remains in its original position after actuation), rocker, socket, and triple frame - The system is in the Busch-Jaeger design: Future Linear, matte black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled and ready for installation by the cable professionals at EBROM, includes EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo is for illustration of the horizontal installation Manufacturer of LED dimmer, dimmer dial, socket, push-button, push-button rocker, and 3-gang frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-885-102 and intermediate switch 2000/7 US and 1786-885 in MATTE BLACK, including EBROM phase tester for installation of the devices (6523 U – 102)
127,82 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-button changeover switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise operation due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, intermediate switch (for intermediate switching), rocker, and double frame - The system is in the design of Busch Jäger: MATT BLACK LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the devices Manufacturer of LED dimmer, dimmer knob, intermediate switch, intermediate switch rocker, and 2-gang frame: Busch Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-885-102 and light switch 2000/6 US and 1786-885 in MATTE BLACK including EBROM phase tester for mounting the devices (6523 U – 102)
122,62 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary actuation, push-button changeover switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise operation through the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central cover plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, light switch (two-way ON/OFF switch), rocker, and double frame - The system is in the design of Busch Jäger: MATT BLACK LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices Manufacturer of LED dimmer, dimmer knob, switch, switch rocker, and double frame: Busch Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Busch-Jaeger 6523U-102 LED rotary dimmer + dimmer knob 6540-885-102 and light switch 2020 US in Future Linear matt black including EBROM phase tester for installation of devices 6523 U – 102
145,50 €
Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-button change-over switch and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer cover, light push-button (push-button with spring mechanism - returns to its original position after actuation), rocker and double frame - The system is in the Busch-Jaeger design: Future Linear, matte black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (ring of the dimmer is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, includes EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically, the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer cover, push-button, push-button rocker and double frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM
Our Videos
Learn more about our products and find out the most important information about cables
What does EBROM stand for?
Copper or aluminum?
Diameter vs. cross-section
HI-FLEX highly flexible
FLY Automotive Cables
Perfect pressings
Cable lugs DIN comparison
Free standard shipping to Germany from €60
Fast shipping within GermanyIn-house German assembly
Cable assemblies from our own productionSpecialist Consulting
Consultation by phone at +49 8074 9176911