Sockets, Switches & Accessories (1618)

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-push switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, socket with child protection, and double frame - The system is in the Busch-Jaeger design: Future Linear matte black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for installing the devices - This combination can be mounted both horizontally and vertically; the photo is for demonstration of the horizontal mounting Manufacturer of LED dimmer, dimmer knob, socket with child protection, and double frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-button changeover switch, and soft-click mechanism. 2-wire connection (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, light button (push-button with spring mechanism - remains in its original position after actuation), rocker, socket with child protection, and triple frame - The system is in the Busch-Jaeger design: Future Linear, matte black LED flush-mounted rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, assembled for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer knob, socket, push-button, push-button rocker, and triple frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-button change-over switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without center plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer cover, and single frame - Dimmer and cover in Busch-Jaeger design: glossy anthracite LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready-to-install set assembled for you by the cable professionals at EBROM, including an EBROM phase tester for installing the device Manufacturer of LED dimmer, dimmer cover, and single frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, soft-click push-changeover switch and soft-locking. 2-wire connection technique (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer plate and single frame - Dimmer and plate in the design by Busch-Jaeger: Future Linear studio white glossy LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM phase tester for mounting the device Manufacturer of LED dimmer, dimmer plate and single frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without center plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, and single frame - Dimmer and knob in Busch-Jaeger design: Future Linear matte black LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the device Manufacturer of LED dimmer, dimmer knob, and single frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Quiet operation due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer and dimmer knob (simply install this dimmer with the central plate into existing 1, 2, 3, 4, or 5-gang frames in your home and use it as a replacement or extension for a standard light switch or similar; dimmer and knob in the design of Busch-Jaeger: Future Linear studio white glossy LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - including glow lamp (ring of the dimmer is illuminated when "OFF") Assembled ready for installation by the cable professionals at EBROM, including EBROM phase tester for mounting the device Manufacturer of LED dimmer and dimmer knob: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary control, push-button changeover switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, and single frame - dimmer and knob in the design by Busch-Jaeger: Future Linear studio white glossy LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the device Manufacturer LED dimmer, dimmer knob, and single frame: Busch-Jaeger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, push-changeover switch, and soft-detent. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional light sources possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload-protected (electronic fuse). With adjustable minimum brightness. Without central cover plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer and dimmer knob (simply install this dimmer with the central cover plate into existing 1, 2, 3, 4, or 5-gang frames in your home and use as a replacement or extension for a standard light switch or similar; dimmer and knob in Busch-Jaeger design: Matte Black LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the device Manufacturer of LED dimmer and dimmer knob: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

Flush-mounted rotary dimmer, LED dimmer insert, switchable between leading-edge and trailing-edge control via selector switch. With rotary operation, two-way push-switch, and soft-click mechanism. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Mixed load operation of LEDi and conventional lamps is possible. Switchable between leading-edge and trailing-edge control via selector switch. Low-noise due to the use of MOSFET transistors. Short-circuit proof and overload protected (electronic fuse). With adjustable minimum brightness. Without central plate. Nominal voltage: 230 V~, + 10 % / - 10 % Consisting of: LED dimmer, dimmer knob, and single frame - Dimmer and knob in Busch-Jaeger design: MATT BLACK LED rotary dimmer type: 6523 U-102 Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including EBROM phase tester for mounting the device Manufacturer of LED dimmer, dimmer knob, and single frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer features a shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and soft-detent. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), both those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, about 20% transformer losses should be considered, and about 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 2 x LED dimmer, 2 x dimmer dial, socket outlet and triple frame - The system is in the Busch Jäger design: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and does not require expansion. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - Includes glow lamp (ring of the dimmer is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer dials, socket, and triple frame: Busch Jäger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and requires no expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), both for those operated on conventional and electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Additionally, it supports mixed-load operation with LEDi and conventional light sources. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control as well as adjustable minimum and maximum brightness. By using MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient temperature for operation is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 2 x LED dimmer, 2 x dimmer cover, socket, and triple frame - The system is in the Busch-Jaeger design: Future Linear, matte black The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion claws. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - Includes glow lamp (ring of the dimmer is illuminated when "OFF") Ready for installation, put together for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate the horizontal installation Manufacturer of LED dimmer, dimmer covers, socket, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click mechanism. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specially optimized for dimming retrofit LED lamps (LEDi), whether operated on conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Additionally, it supports mixed load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit and overload-proof thanks to an electronic fuse. Technical specifications include a rated voltage of 230 V~ (+/- 10%), a rated frequency of 50/60 Hz, and a rated power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage range of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 2 x LED dimmer, 2 x dimmer dial, intermediate switch (for intermediate switching), rocker, and triple frame - The system is in the Busch-Jaeger design: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and does not require a neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit and overload-proof. The rated voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and rated power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - includes glow lamp (dimmer ring is illuminated when "OFF") Assembled and ready for installation by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer dials, intermediate switch, intermediate switch rocker, and triple frame: Busch-Jaeger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click detent. Thanks to its 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), whether operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, as well as dimmable halogen energy-saving lamps. Furthermore, it supports mixed-load operation with LEDi and conventional lamps. For custom adjustments, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When using conventional transformers, approximately 20% transformer losses should be taken into account; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer complies with the EU RoHS 3 directive dated July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 2 pieces LED dimmer, 2 x dimmer dial, light push-button (button with spring mechanism) - returns to its original position after actuation - rocker and triple frame - The system is in the design of Busch Jäger: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of under 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof as well as overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge phase control adjustable - includes glow lamp (the dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer LED dimmer, dimmer dials, push-button, rocker, and 3-gang frame: Busch Jäger // Manufacturer phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer is characterized by its shallow installation depth of less than 20 mm and does not require an expansion mechanism. It features rotary operation, a push-changeover switch, and a soft-click detent. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), including those operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. In addition, it supports mixed load operation with LEDi and conventional lamps. For individual adjustment, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge phase control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a nominal voltage of 230 V~ (+/- 10%), a nominal frequency of 50/60 Hz, and a nominal power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When using conventional transformers, approximately 20% transformer losses should be considered; for electronic transformers, approximately 5%. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive of July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 2 x LED dimmer, 2 x dimmer dial, light switch (two-way switch ON/OFF), rocker, and triple frame - The system is in the Busch Jäger design: Future Linear studio white glossy The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof as well as overload-protected. The nominal voltage is 230 V~ (+/- 10%) with a power output of 2 - 100 W/VA (leading-edge) and nominal power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - Leading-edge or trailing-edge phase control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation by the cable experts at EBROM, including an EBROM phase tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer dials, switch, switch rocker, and 3-gang frame: Busch Jäger // Manufacturer of phase tester: EBROM; A SET IDEA BY EBROM

This compact dimmer features a shallow installation depth of less than 20 mm and does not require an expansion claw mechanism. It is equipped with a rotary control, a push-to-make/break switch, and a soft-click detent. Thanks to the 2-wire connection technology, no neutral conductor is required. The dimmer is specifically optimized for dimming retrofit LED lamps (LEDi), whether operated with conventional or electronic transformers. It is also suitable for incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable halogen energy-saving lamps. Furthermore, it supports mixed load operation with LEDi and conventional light sources. For individual customization, the dimmer offers manually adjustable operating modes for leading-edge and trailing-edge control, as well as adjustable minimum and maximum brightness. Due to the use of MOSFET transistors, it operates quietly. It is short-circuit-proof and overload-protected thanks to an electronic fuse. Technical specifications include a rated voltage of 230 V~ (+/- 10%), a rated frequency of 50/60 Hz, and a rated power of 2 - 100 W/VA (leading-edge) or 2 - 400 W/VA (trailing-edge). The dimmer can be illuminated by a glow lamp, which is included with the central plate. When used with conventional transformers, approximately 20% transformer losses should be considered, and approximately 5% for electronic transformers. Additional details include a rated voltage of 207 to 253 V, a rated control supply voltage of 220 to 240 V, a frequency of 50 to 60 Hz, and a power of 2 to 400 V·A. The dimmer is compliant with the EU RoHS 3 directive dated July 22, 2019, and has an IP20 protection rating. The ambient operating temperature is between 0 and +35 °C. Dimensions: WxHxD 71mm x 71mm x 42mm, installation depth 20 mm Consisting of: 2x LED dimmer, 2x dimmer knob, intermediate switch (for intermediate switching), rocker, and triple frame - The system is in the Busch-Jaeger design: Future Linear, matte black The LED rotary dimmer type 6523 UR-104 has an installation depth of less than 20 mm and requires no expansion claws. With its rotary and push operation, it is easy to use and requires no neutral conductor. It is optimized for retrofit LEDs and compatible with various lamp types, supports mixed operation, and is short-circuit-proof and overload-protected. The rated voltage is 230 V~ (+/- 10%) with a power of 2 - 100 W/VA (leading-edge) and rated power: 2 - 400 W/VA (trailing-edge) Minimum and maximum brightness - leading-edge or trailing-edge control adjustable - Includes glow lamp (dimmer ring is illuminated when "OFF") Assembled ready for installation for you by the cable professionals at EBROM, including EBROM voltage tester for mounting the devices - This combination can be mounted both horizontally and vertically; the photo serves to illustrate horizontal mounting Manufacturer of LED dimmer, dimmer knobs, intermediate switch, intermediate switch rocker, and triple frame: Busch-Jaeger // Manufacturer of voltage tester: EBROM; A SET IDEA BY EBROM